Today's Message Index:
----------------------
1. 04:12 PM - Floscan sensor (Tim Juhl)
2. 05:14 PM - Re: Floscan sensor (Peter Harris)
3. 07:01 PM - Re: Floscan sensor (Charles Gallagher)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
I can get my hands on a lightly used floscan transducer dirt cheap. It is a model
201B-18. Looking on Floscan's website I see specs on a 201B-6 but I haven't
had luck finding specs on the -18.
Does any one know if this unit is suitable for use with a Jab 3300 and it's expected
fuel flow rates?
Tim Juhl
--------
______________
CFII
Champ L16A flying
Zodiac XL - Jabiru 3300A
Working on fuselage
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=178552#178552
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Tim FWIW I have been successfully using a Navman which has a rather
cumbersome turbine transducer and no doubt effects my gravity feed to the
pump.
I find the fuel flow meter one of the most useful in the cockpit especially
for managing fuel flow on a cross country. And it shows remaining fuel with
an accuracy of 2%.
Peter H
-----Original Message-----
From: owner-jabiruengine-list-server@matronics.com
[mailto:owner-jabiruengine-list-server@matronics.com] On Behalf Of Tim Juhl
Sent: Wednesday, 23 April 2008 9:09 AM
Subject: JabiruEngine-List: Floscan sensor
I can get my hands on a lightly used floscan transducer dirt cheap. It is a
model 201B-18. Looking on Floscan's website I see specs on a 201B-6 but I
haven't had luck finding specs on the -18.
Does any one know if this unit is suitable for use with a Jab 3300 and it's
expected fuel flow rates?
Tim Juhl
--------
______________
CFII
Champ L16A flying
Zodiac XL - Jabiru 3300A
Working on fuselage
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=178552#178552
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Floscan sensor |
Tim, the "B" in the model number denotes a flow rate of 0.6 to 60 GPH and is recommended
for 100 to 200 HP. If you do install the flow meter double check the
flow direction before you button every thing up. Also, the FLOW SCAN support
is good before and after your installation , base on my experience on a marine
application. Rgs.,Charles Gallagher
I can get my hands on a lightly used floscan transducer dirt cheap. It is a model
201B-18. Looking on Floscan's website I see specs on a 201B-6 but I haven't
had luck finding specs on the -18.
Does any one know if this unit is suitable for use with a Jab 3300 and it's expected
fuel flow rates?
Tim Juhl
--------
______________
CFII
Champ L16A flying
Zodiac XL - Jabiru 3300A
Working on fuselage
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=178552#178552
---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|