Today's Message Index:
----------------------
1. 08:12 AM - Re: Re: Float Level (Lynn Matteson)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Thanks, Ron. At the present, I'm pretty happy with the 220, but
warmer ambient temps might have me going larger on the main jet, so
this is valuable info.
Lynn
On May 7, 2008, at 5:45 PM, RONAL SMITH wrote:
> Lynn,
> I didn't measure the 240 main jet before I put it in, but here are
> measurements for the 220 main jet - .078", drill no. 47,
> and for the spare 245 main jet - .089", drill no. 43. You could
> extrapolate between these two numbers to get a size for the 240
> main jet. I would error on the smaller size, otherwise you could
> be running rich. Hope this helps.
> Ron Smith, KF IV with Jabiru 2200A engine.
> forums.matronics.com_-
> ============================================================ _-
> contribution_-
> ===========================================================
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|