Today's Message Index:
----------------------
1. 01:24 AM - Re: CHT/EGT wire routing (James, Clive R)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | CHT/EGT wire routing |
EGT/Oil temp pressure are hung off the induction pipes under the
barrels, gives you something to tyrap to that's cold and keeps them away
from the exhaust.
CHT cables are run along top of barrels just under heads, looping over
to the top of each one, whole lot under the cooling ducts.
Regards, Clive
-----Original Message-----
From: owner-jabiruengine-list-server@matronics.com
[mailto:owner-jabiruengine-list-server@matronics.com] On Behalf Of Ron
Shannon
Sent: 10 July 2008 18:15
Subject: JabiruEngine-List: CHT/EGT wire routing
--> <rshannon@cruzcom.com>
How have others have routed and secured their CHT/EGT wires around the
engine? Photos would be especially appreciated. TIA.
Ron
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|