Today's Message Index:
----------------------
1. 03:12 PM - Jab 3300 Airbox location (chris Sinfield)
2. 04:26 PM - Re: Jab 3300 Airbox location (Lynn Matteson)
3. 04:54 PM - Re: Jab 3300 Airbox location (Fiveonepw@aol.com)
4. 06:02 PM - 5.1 lt engine (Gilles St-Pierre)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Jab 3300 Airbox location |
Hi all
I am installing the Airbox onto the Zodiac XL firewall. Since I don't have a Jab3300
engine yet and the installation paperwork said to line up the air exit level
with the inlet to the Bing Carb I have a problem.
There are no firewall measurements in the paperwork to locate this airbox? I have
the engine mount and can fit it between that on the RH side, but how far down
from the horizontal stiffener? How exact does it have to be L/R up ?down from
the carb? the DVD is not that clear on measurements.
Pete Is this something that could be added to the 601 FWF paperwork
Thanks
Chris.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=198997#198997
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Jab 3300 Airbox location |
If I were you, I'd wait to install the airbox until the engine is in
place. I know that when I installed my Jab 2200 in a Kitfox, there
was VERY little room to locate the airbox, and I ended up having a
limit of about 3 degrees of rotational movement to play with. You
might have more room on your plane than I did on mine, but the golden
rule is: mount all the big stuff first, then locate small items last
as room allows.
Lynn Matteson
Kitfox IV Speedster
Jabiru 2200
Status: "Condition grounded, but determined to try." (Pink
Floyd..."Learning to Fly")
do not archive
On Aug 16, 2008, at 6:09 PM, chris Sinfield wrote:
> <chris_sinfield@yahoo.com.au>
>
> Hi all
> I am installing the Airbox onto the Zodiac XL firewall. Since I
> don't have a Jab3300 engine yet and the installation paperwork said
> to line up the air exit level with the inlet to the Bing Carb I
> have a problem.
>
> There are no firewall measurements in the paperwork to locate this
> airbox? I have the engine mount and can fit it between that on the
> RH side, but how far down from the horizontal stiffener? How exact
> does it have to be L/R up ?down from the carb? the DVD is not that
> clear on measurements.
>
> Pete Is this something that could be added to the 601 FWF paperwork
>
> Thanks
> Chris.
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=198997#198997
>
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Jab 3300 Airbox location |
In a message dated 8/16/2008 6:26:58 P.M. Central Daylight Time,
lynnmatt@jps.net writes:
Status: "Condition grounded, but determined to try." (Pink
Floyd..."Learning to Fly")
Awesome! Heard the song many years ago and didn't have a clue till after
getting my ticket-
Tongue-tied, twisted, just an Earth-bound misfit, I...
Mark - do not archive
**************Looking for a car that's sporty, fun and fits in your budget?
Read reviews on AOL Autos.
(http://autos.aol.com/cars-Volkswagen-Jetta-2009/expert-review?ncid=aolaut00030000000007 )
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Hello
i m about to install an early production 8 cyl (Jabiru) no 006 into a Pega
zair 100. It is a replacement for a Lycoming 235 To those who have used
this engine so far...what are your impressions on it
Any comments =2C good or bad will be appreciated. Recommendations equally
welcome
Thanks for your time
gilles
dr gilles st pierre
_________________________________________________________________
If you like crossword puzzles=2C then you'll love Flexicon=2C a game which
combines four overlapping crossword puzzles into one!
http://g.msn.ca/ca55/208
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|