---------------------------------------------------------- JabiruEngine-List Digest Archive --- Total Messages Posted Mon 08/25/08: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:17 AM - CHT probe - 2 pictures for you (Peter and Jan Disher) 2. 01:24 AM - CHT probes. (Peter and Jan Disher) 3. 01:51 AM - Re: CHT probe - 2 pictures for you (James, Clive R) 4. 02:34 AM - Re: CHT probe - 2 pictures for you (Peter and Jan Disher) 5. 07:08 AM - Re: CHT probes. (Ron Shannon) ________________________________ Message 1 _____________________________________ Time: 01:17:54 AM PST US From: "Peter and Jan Disher" Subject: JabiruEngine-List: CHT probe - 2 pictures for you Hi Ron Shannon, What I did Ron was use the hole in-between the two spark plugs to place a 10/32 screw. I then drilled a hole 1/8 to slide the probe into, then fasterened it with the screw. I called Jabiru here in OZ and they said the hole can be used for this purpose or was some time ago. The reason I went this way was that the ring dia. for the sparkplug is too large and did not fit good in my opinion only. I did need to remove the rings carefully from the leads which went well and they do record well also. Pictures attached. Pete Disher kit 30 VH-PDI OZ You have been sent 2 pictures. IMG_5367.JPG IMG_5370.JPG These pictures were sent with Picasa, from Google. Try it out here: http://picasa.google.com/ ________________________________ Message 2 _____________________________________ Time: 01:24:41 AM PST US From: "Peter and Jan Disher" Subject: JabiruEngine-List: CHT probes. Another advantage point Ron is that when one removes sparkplugs your not getting tangled up with probe wires. Pete D ________________________________ Message 3 _____________________________________ Time: 01:51:18 AM PST US Subject: RE: JabiruEngine-List: CHT probe - 2 pictures for you From: "James, Clive R" Another good idea Pete, I'm assuming the end of the T/C is what you find when you cut it out the crimp? Do you do anything to it? CJ ________________________________ From: owner-jabiruengine-list-server@matronics.com [mailto:owner-jabiruengine-list-server@matronics.com] On Behalf Of Peter and Jan Disher Sent: 25 August 2008 09:15 Subject: JabiruEngine-List: CHT probe - 2 pictures for you Hi Ron Shannon, What I did Ron was use the hole in-between the two spark plugs to place a 10/32 screw. I then drilled a hole 1/8 to slide the probe into, then fasterened it with the screw. I called Jabiru here in OZ and they said the hole can be used for this purpose or was some time ago. The reason I went this way was that the ring dia. for the sparkplug is too large and did not fit good in my opinion only. I did need to remove the rings carefully from the leads which went well and they do record well also. Pictures attached. Pete Disher kit 30 VH-PDI OZ You have been sent 2 pictures. IMG_5367.JPG IMG_5370.JPG These pictures were sent with Picasa, from Google. Try it out here: http://picasa.google.com/ ________________________________ Message 4 _____________________________________ Time: 02:34:10 AM PST US From: "Peter and Jan Disher" Subject: Re: JabiruEngine-List: CHT probe - 2 pictures for you No CJ. I just take the ring off the wire and there it is the pair joined as they should be. I then poke the pair of wires it inio the hole that I drilled to the depth where the screw will pick it up and hold it in position, done job, too easy. Pete D ----- Original Message ----- From: James, Clive R To: jabiruengine-list@matronics.com Sent: Monday, August 25, 2008 6:50 PM Subject: RE: JabiruEngine-List: CHT probe - 2 pictures for you Another good idea Pete, I'm assuming the end of the T/C is what you find when you cut it out the crimp? Do you do anything to it? CJ ------------------------------------------------------------------------- ----- From: owner-jabiruengine-list-server@matronics.com [mailto:owner-jabiruengine-list-server@matronics.com] On Behalf Of Peter and Jan Disher Sent: 25 August 2008 09:15 To: jabiruengine-list@matronics.com Subject: JabiruEngine-List: CHT probe - 2 pictures for you Hi Ron Shannon, What I did Ron was use the hole in-between the two spark plugs to place a 10/32 screw. I then drilled a hole 1/8 to slide the probe into, then fasterened it with the screw. I called Jabiru here in OZ and they said the hole can be used for this purpose or was some time ago. The reason I went this way was that the ring dia. for the sparkplug is too large and did not fit good in my opinion only. I did need to remove the rings carefully from the leads which went well and they do record well also. Pictures attached. Pete Disher kit 30 VH-PDI OZ You have been sent 2 pictures. IMG_5367.JPG IMG_5370.JPG These pictures were sent with Picasa, from Google. Try it out here: http://picasa.google.com/ Checked by AVG - http://www.avg.com 8/24/2008 12:15 PM ________________________________ Message 5 _____________________________________ Time: 07:08:53 AM PST US From: "Ron Shannon" Subject: Re: JabiruEngine-List: CHT probes. I'm really not trying to start or continue a debate about what mounting method is best. I was just trying to offer help to those who are mounting ring sensors on the standard-sized spark plugs. For those who want to debate the relative virutes of other methods... have at it. Ron On Mon, Aug 25, 2008 at 1:24 AM, Peter and Jan Disher wrote: > Another advantage point Ron is that when one removes sparkplugs your not > getting tangled up with probe wires. > Pete D > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message jabiruengine-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/JabiruEngine-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/jabiruengine-list Browse Digests http://www.matronics.com/digest/jabiruengine-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.