Today's Message Index:
----------------------
1. 05:52 AM - Sensenich prop for the 3300 (aslsa.rng@gmail.com)
2. 09:53 AM - Re: Sensenich prop for the 3300 (Craig Payne)
3. 10:51 AM - Re: Sensenich prop for the 3300 (Joe Ronco)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Sensenich prop for the 3300 |
From the Sensenich web site:
http://www2.sensenich.com/cgi-bin/webcart/webcart.cgi
2A0R5L68EN
Rick
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Sensenich prop for the 3300 |
Looking at the bottom of the attached screen shot from the Sensenich web
site 2A0R5L68EN looks like a prop for a Rotax in a pusher configuration. The
prop I received is in my FWF kit from Jabiru USA is a 2A0J5R64ZN (the one at
the top). Here is my guess at the encoding:
2A0J5R64ZN
2A0R5L68EN
The 2 is for two blades. R/J is Rotax vs. Jabiru. R/L is Right vs. Left
turning. 64 or 68 is the diameter. Although I don't have any direct evidence
the fine "N" indicates the nickel leading edge protection.
-- Craig
From: owner-jabiruengine-list-server@matronics.com
[mailto:owner-jabiruengine-list-server@matronics.com] On Behalf Of
aslsa.rng@gmail.com
Sent: Sunday, October 19, 2008 6:52 AM
Subject: JabiruEngine-List: Sensenich prop for the 3300
>From the Sensenich web site:
http://www2.sensenich.com/cgi-bin/webcart/webcart.cgi
2A0R5L68EN
Rick
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Sensenich prop for the 3300 |
You can also check the link below from the Sensenich web site.
http://www.sensenichprop.com/sen_html/carbon_faq-2.pdf
Joe R
From: owner-jabiruengine-list-server@matronics.com
[mailto:owner-jabiruengine-list-server@matronics.com] On Behalf Of Craig
Payne
Sent: Sunday, October 19, 2008 10:53 AM
Subject: RE: JabiruEngine-List: Sensenich prop for the 3300
Looking at the bottom of the attached screen shot from the Sensenich web
site 2A0R5L68EN looks like a prop for a Rotax in a pusher configuration. The
prop I received is in my FWF kit from Jabiru USA is a 2A0J5R64ZN (the one at
the top). Here is my guess at the encoding:
2A0J5R64ZN
2A0R5L68EN
The 2 is for two blades. R/J is Rotax vs. Jabiru. R/L is Right vs. Left
turning. 64 or 68 is the diameter. Although I don't have any direct evidence
the fine "N" indicates the nickel leading edge protection.
-- Craig
From: owner-jabiruengine-list-server@matronics.com
[mailto:owner-jabiruengine-list-server@matronics.com] On Behalf Of
aslsa.rng@gmail.com
Sent: Sunday, October 19, 2008 6:52 AM
Subject: JabiruEngine-List: Sensenich prop for the 3300
>From the Sensenich web site:
http://www2.sensenich.com/cgi-bin/webcart/webcart.cgi
2A0R5L68EN
Rick
http://www.matronics.com/Navigator?JabiruEngine-List
http://forums.matronics.com
http://www.matronics.com/contribution
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|