Today's Message Index:
----------------------
1. 07:33 AM - Re: Tach scatter (DaveG601XL)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Tach scatter |
Mack,
I have the same A/C, engine and Dynon D180 as you. My tach reading is correct
and rock solid. Lets see if we are hooked up the same.
My alternator signal tee's off of one of the two big output wires up stream of
the voltage regulator. This off-take wire has an in-line fuse holder and hooks
up to the Dynon white/green wire for "left tach." In the Dynon set-up, double
check your 6 pulses per rev set-up is on the same side tach you are wired to.
Make sure you do not have any bad connections or shorts in this circuit. Maybe
also change out your fuse to another one.
Good luck,
p.s. Unless you have a climb prop, I doubt you get 2800 static RPM on the ground.
I see 2600 with the 64ZK49 that Jabiru supplies with their FWF kit.
--------
David Gallagher
601 XL/Jabiru 3300
First flight 7/24/08
Phase I flight test complete 10/16/08
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=215127#215127
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|