Today's Message Index:
----------------------
1. 10:11 AM - Re: Question (MHerder)
2. 10:45 AM - Re: Re: Question (Don Honabach)
3. 10:56 AM - Re: Question (MHerder)
4. 11:09 AM - Premium priced Coil-UK eBay (James, Clive R)
5. 05:38 PM - Re: Re: Question (Bill Fisher)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
My 3300 was running about 2-300 rpms lower after I tilted my carb to better the
mixture distribution. This was surprising to me to say the least.
I later found that the throttle was not moving all the way open because I rotated
the carb far enought that the arm was getting stopped by the distributor cap.
Moral to the story is that after EVERY change of somehting... no matter how
small, operation of all components must be checked and double checked. Non
issue in this case, but never take for granted that a small "tweak" or change
could have unintended consequences.
All I did was rotate the carb a few degrees.
--------
Zodiac 601 HD
Jabiru 3300
Wood Sensinich 64x47
Finally Flying
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=339447#339447
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Thanks for posting -- this was on my backburner to try (my temps are good, but
I wanted to see if I could get to them to be better by 'balancing the carb').
Don
-----Original Message-----
From: owner-jabiruengine-list-server@matronics.com [mailto:owner-jabiruengine-list-server@matronics.com] On Behalf Of MHerder
Sent: Tuesday, May 10, 2011 10:08 AM
Subject: JabiruEngine-List: Re: Question
--> <michaelherder@beckgroup.com>
My 3300 was running about 2-300 rpms lower after I tilted my carb to better the
mixture distribution. This was surprising to me to say the least.
I later found that the throttle was not moving all the way open because I rotated
the carb far enought that the arm was getting stopped by the distributor cap.
Moral to the story is that after EVERY change of somehting... no matter how
small, operation of all components must be checked and double checked. Non
issue in this case, but never take for granted that a small "tweak" or change
could have unintended consequences.
All I did was rotate the carb a few degrees.
--------
Zodiac 601 HD
Jabiru 3300
Wood Sensinich 64x47
Finally Flying
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=339447#339447
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Please report back on that... It would make me feel better to know someone else
did it too.
--------
Zodiac 601 HD
Jabiru 3300
Wood Sensinich 64x47
Finally Flying
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=339455#339455
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Premium priced Coil-UK eBay |
http://cgi.ebay.co.uk/Ignition-Coil-4-Loncin-G340-G390-Honda-GX340-GX390
-/190525412504?_trksid=p4340.m263&_trkparms=algo%3DDLSL%252BSIC%26its
%3D
I%26itu%3DUCI%252BIA%252BUA%252BFICS%252BUFI%252BDDSIC%26otn%3D8%26pmod%
3D190432629654%252B190432629654%26po%3D%26ps%3D63%26clkid%3D905618042262
6785875
I suppose we should all be frightened off by the price?
Regards, Clive
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
On May 10, 2011, at 10:43 AM, Don Honabach wrote:
>
> Thanks for posting -- this was on my backburner to try (my temps are good, but
I wanted to see if I could get to them to be better by 'balancing the carb').
>
> Don
>
> -----Original Message-----
> From: owner-jabiruengine-list-server@matronics.com [mailto:owner-jabiruengine-list-server@matronics.com] On Behalf Of MHerder
> Sent: Tuesday, May 10, 2011 10:08 AM
> To: jabiruengine-list@matronics.com
> Subject: JabiruEngine-List: Re: Question
>
> --> <michaelherder@beckgroup.com>
>
> My 3300 was running about 2-300 rpms lower after I tilted my carb to better the
mixture distribution. This was surprising to me to say the least.
>
> I later found that the throttle was not moving all the way open because I rotated
the carb far enought that the arm was getting stopped by the distributor
cap. Moral to the story is that after EVERY change of somehting... no matter
how small, operation of all components must be checked and double checked. Non
issue in this case, but never take for granted that a small "tweak" or change
could have unintended consequences.
>
> All I did was rotate the carb a few degrees.
>
> --------
> Zodiac 601 HD
> Jabiru 3300
> Wood Sensinich 64x47
> Finally Flying
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=339447#339447
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|