Today's Message Index:
----------------------
1. 11:53 AM - Fuel Line (BobbyPaulk@comcast.net)
2. 06:16 PM - Re: Fuel Line (MacDonald Doug)
3. 10:57 PM - Re: Fuel Line (Rob Turk)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
List
I am getting ready to do my 5th. "Conditional" and I am going to change out the
fuel lines again.
I am planning on using the new Parker Super Flex FL line as sold by ACS.
Can anyone recommend this fuel line or any other / better ?? I need one that can
stand up to Ethanol even though I am currently not using it. I am using Marine
( Non-ethanol ) fuel rated at 92 octane and boosting it to 93 octane. It is
working great and I have not noticed any change in performance or temps from
the 100LL.
Also does anyone know of a small hose clamp ( and source ) that will work on the
connection to the carb. The clamps I am using are about 1/2" wide and cover
the bead on the metal line from the carb. I would like to clamp it on the small
tube prior to the bead if possible. Is anyone using the spring type automotive
clamp?
Any info would be appreciated
Bobby ( age 74 )
Zodiac 601 XL "B"
Jabiru 3300 S/N 1141
Sensenich 64" x 51" Prop
Bing Carb 260 Main & 285 Needle Jet
Status - Flying 152 hrs.
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Bobby, I'm no expert on Jabiru engines but I have had good luck with Oteker
Ear Clamps.- They are-a single use clamp so you have to have-several
on hand-but they seem to hold much better than worm gear style clamps.
- A side benifit is the "ears" don't stick out as far as compaired to the
screw on a worm gear style clamp.- If your interested in seeing more abo
ut-ear clamps, the EAA has a video about them in their homebuilder hints
section.=0A-=0ADoug M=0ACH-701=0ANW Ontario, Canada=0A =0A=0A____________
____________________=0A From: "BobbyPaulk@comcast.net" <BobbyPaulk@comcast.
net>=0ATo: jabiruengine-list@matronics.com =0ASent: Monday, May 21, 2012 1:
52:06 PM=0ASubject: JabiruEngine-List: Fuel Line=0A =0A=0A=0A=0AList =0AI
am getting ready to do my 5th. "Conditional" and I am going to change out t
he fuel lines again. =0AI am planning on using the new Parker Super Flex FL
line as sold by ACS. =0ACan=0A anyone recommend this fuel line or any othe
r / better ??- I need one =0Athat can stand up to Ethanol even though I a
m currently not using it. I =0Aam using Marine ( Non-ethanol ) fuel rated a
t 92 octane and boosting it =0Ato 93 octane. It is working great and I have
not noticed any change in =0Aperformance or temps from the 100LL.=0AAlso d
oes anyone know of a small=0A hose clamp ( and source ) that will work on t
he connection to the carb.=0A The clamps I am using are about 1/2" wide and
cover the bead on the =0Ametal line from the carb. I would like to clamp i
t on the small tube =0Aprior to the bead if possible. Is anyone using the s
pring type =0Aautomotive clamp?=0A=0AAny info would be appreciated=0A=0ABob
by- ( age 74 )=0AZodiac 601 XL "B"=0AJabiru- 3300- S/N- 1141=0ASens
enich 64" x 51" Prop=0ABing Carb 260 Main & 285 Needle Jet=0AStatus - Flyin
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
I am using Parker Superflex on my Rans S-6S after Rans issued an AD to
replace all the blue flexline.
Works great for me with AVGAS, Euro95 and Euro98 with and without Ethanol.
On 5/21/2012 8:52 PM, BobbyPaulk@comcast.net wrote:
>
>
> List
> I am getting ready to do my 5th. "Conditional" and I am going to
> change out the fuel lines again.
> I am planning on using the new Parker Super Flex FL line as sold by ACS.
> Can anyone recommend this fuel line or any other / better ?? I need
> one that can stand up to Ethanol even though I am currently not using
> it. I am using Marine ( Non-ethanol ) fuel rated at 92 octane and
> boosting it to 93 octane. It is working great and I have not noticed
> any change in performance or temps from the 100LL.
> Also does anyone know of a small hose clamp ( and source ) that will
> work on the connection to the carb. The clamps I am using are about
> 1/2" wide and cover the bead on the metal line from the carb. I would
> like to clamp it on the small tube prior to the bead if possible. Is
> anyone using the spring type automotive clamp?
>
> Any info would be appreciated
>
> Bobby ( age 74 )
> Zodiac 601 XL "B"
> Jabiru 3300 S/N 1141
> Sensenich 64" x 51" Prop
> Bing Carb 260 Main & 285 Needle Jet
> Status - Flying 152 hrs.
>
> *
>
>
> *
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|