Today's Message Index:
----------------------
1. 12:47 PM - Re: Loctite (Pete Krotje)
2. 05:56 PM - Re: Loctite (James Crowder)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
The Loctite is not that expensive. A small tube of 620 is about $2.00 from
Jabiru USA and less than that from McMaster.com. The small tube will
usually be enough for completing one engine. The primer 7471 is $18 for
enough to complete several engines.
Pete
-----Original Message-----
From: owner-jabiruengine-list-server@matronics.com
[mailto:owner-jabiruengine-list-server@matronics.com] On Behalf Of aprazer
Sent: Saturday, July 27, 2013 12:17 PM
Subject: JabiruEngine-List: Loctite
--> <aprazer@cableone.net>
Greetings from Idaho
I'm presently working on a couple of service bulletins and they are calling
for the use of Loctite 620 and Loctite 7471. Neither of these products are
available from your normal automotive stores, i.e., NAPA.
I finally found them @ Granger.
For the smaller containers, shipping, etc., the total came to $110.00.
Pete @ Jabiru USA is not available as he is in Oshkosh - so do any of you
know what Jabiru recommends as a replacement?
Mack
601XLB
3300
--------
The poh-oh-unemployed farm boy from Idaho
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=405435#405435
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Pete,
There was talk of a change in where Jabiru was asking for the 620 to be
used. Is it still required on the through bolt nuts and on the flywheel
attach bolts?
Thanks, Jim Crowder
-----Original Message-----
From: owner-jabiruengine-list-server@matronics.com
[mailto:owner-jabiruengine-list-server@matronics.com] On Behalf Of Pete
Krotje
Sent: Tuesday, August 06, 2013 12:47 PM
Subject: RE: JabiruEngine-List: Loctite
--> <pete@usjabiru.com>
The Loctite is not that expensive. A small tube of 620 is about $2.00 from
Jabiru USA and less than that from McMaster.com. The small tube will
usually be enough for completing one engine. The primer 7471 is $18 for
enough to complete several engines.
Pete
-----Original Message-----
From: owner-jabiruengine-list-server@matronics.com
[mailto:owner-jabiruengine-list-server@matronics.com] On Behalf Of aprazer
Sent: Saturday, July 27, 2013 12:17 PM
Subject: JabiruEngine-List: Loctite
--> <aprazer@cableone.net>
Greetings from Idaho
I'm presently working on a couple of service bulletins and they are calling
for the use of Loctite 620 and Loctite 7471. Neither of these products are
available from your normal automotive stores, i.e., NAPA.
I finally found them @ Granger.
For the smaller containers, shipping, etc., the total came to $110.00.
Pete @ Jabiru USA is not available as he is in Oshkosh - so do any of you
know what Jabiru recommends as a replacement?
Mack
601XLB
3300
--------
The poh-oh-unemployed farm boy from Idaho
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=405435#405435
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|