Today's Message Index:
----------------------
0. 07:58 AM - Fund Raiser Behind By 20% - Please Contribute Today! (Matt Dralle)
1. 05:25 AM - Cold starts (BobbyPaulk@comcast.net)
2. 06:47 AM - Re: Cold starts (FLYaDIVE)
3. 12:18 PM - Re: Cold starts (aprazer)
Message 0
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Fund Raiser Behind By 20% - Please Contribute Today! |
Dear Listers,
The percentage of members making a Contribution to support the Lists this year
is currently behind last year by at this time by roughly 20%. Please take this
opportunity to show your support for the Matronics Lists and Forums!
Please remember that it is *solely* your direct Contributions that keep these Lists
and Forums up and running and most importantly - AD FREE! If the members
don't want to support the Lists directly, then I might have to add advertisements
to offset the costs of running the Lists. But I don't want to have to do
that. I really like the non-commercial atmosphere here and I think that a lot
of the members appreciate that too.
Please take a moment to make a Contribution today in support of the continued ad-free
operation of all these Lists:
http://www.matronics.com/contribution
Or, drop a personal check in the mail to:
Matt Dralle / Matronics
581 Jeannie Way
Livermore CA 94550
USA
I want to send out a word of appreciation to all of the members that have already
made their generous Contribution to support the Lists! Thank you!
Matt Dralle
Email List and Forums Administrator
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Barry
I went looking for a set of wire gauges at the hangars on the field and no one
had any. BTW the feeler gauge I cut up was over 50 years old. I bought it new
in the early 60's when I put a cam and solid lifters in my '57 Chevy. But I digress
: )
I really like the idea that J. has - cut a piece of .010 brass shim stock long
enough to cover both poles and let the magnets hold it in place while you tighten
the screws.
I have learned a lot of practical ideas from this list.
Thanks,
Keep it up guys.
bobby
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
'57 CHEVY ! ! !
MY FAVORITE WAS THE '55 CHEVY.
BUT FINANCES ONLY LET ME BUY A '53 FORD...
Barry
On Mon, Nov 24, 2014 at 8:24 AM, <BobbyPaulk@comcast.net> wrote:
> Barry
> I went looking for a set of wire gauges at the hangars on the field and no
> one had any. BTW the feeler gauge I cut up was over 50 years old. I bought
> it new in the early 60's when I put a cam and solid lifters in my '57
> Chevy. But I digress : )
> I really like the idea that J. has - cut a piece of .010 brass shim stock
> long enough to cover both poles and let the magnets hold it in place while
> you tighten the screws.
> I have learned a lot of practical ideas from this list.
> Thanks,
> Keep it up guys.
>
>
> bobby
>
> *
>
>
> *
>
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Nothing wrong with a 53 Ford (fix-or-repair-daily)! Mine was Crestline coupe powered
by a six with overdrive.
Sooo sloooooo!
It was the 50th year anniversary for Ford.
Mack
--------
The poh-oh-unemployed farm boy from Idaho
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=434578#434578
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|