Today's Message Index:
----------------------
1. 02:51 PM - Mag Switch (BobbyPaulk@comcast.net)
2. 03:42 PM - Re: Mag Switch (Tim Yoder)
3. 06:09 PM - Re: Mag Switch (Rob)
4. 08:18 PM - Re: Mag Switch (Garth Knowles)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
List
I am changing my left magneto to an E-Mag for easier starting. I would like to
use the ACS Keyed Ignition switch and put 12 volts to the left side only when
the key is on L or both. Don't know if this is possible without putting 12 v.
on both sides when on Both. Does anyone have a wiring diagram?
bobby
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
On my ACS switch only one side was hot in the start position. You can use a
meter to check yours and wire accordingly.
Tim
_____
From: owner-jabiruengine-list-server@matronics.com
[mailto:owner-jabiruengine-list-server@matronics.com] On Behalf Of
BobbyPaulk@comcast.net
Sent: Thursday, January 15, 2015 3:51 PM
Subject: JabiruEngine-List: Mag Switch
List
I am changing my left magneto to an E-Mag for easier starting. I would like
to use the ACS Keyed Ignition switch and put 12 volts to the left side only
when the key is on L or both. Don't know if this is possible without putting
12 v. on both sides when on Both. Does anyone have a wiring diagram?
bobby
---
This email is free from viruses and malware because avast! Antivirus protection
is active.
http://www.avast.com
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
When did e-mag start making them for jabirun engines?
I have one on my lycoming but did not know they made them to work on a
jabiru 2200 engine?
On 01/15/2015 03:51 PM, BobbyPaulk@comcast.net wrote:
> List
> I am changing my left magneto to an E-Mag for easier starting. I would
> like to use the ACS Keyed Ignition switch and put 12 volts to the left
> side only when the key is on L or both. Don't know if this is possible
> without putting 12 v. on both sides when on Both. Does anyone have a
> wiring diagram?
>
> bobby
> *
>
>
> *
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
I installed a Rotec ignition a few months ago. I had an ACS ignition switch (no
"start" position). I too hoped I could use this with the new ignition but after
testing the switch to see how it is wired internally I concluded it would not
work. It is set up for the R and L positions to be open when a particular mag
is active. The Rotec ignition needs one position with power connected to be
closed to be on/hot. I removed the keyed ACS switch and replaced it with 2 regular
on-off switches. I already had a separate start button.
Garth
Sent from Yahoo Mail on Android
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|