JabiruEngine-List Digest Archive

Tue 06/09/15


Total Messages Posted: 3



Today's Message Index:
----------------------
 
     1. 03:41 PM - Hot Cylinder (BobbyPaulk@comcast.net)
     2. 04:24 PM - Re: Hot Cylinder (sttwig)
     3. 04:34 PM - Re: Hot Cylinder (Tim Yoder)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:41:58 PM PST US
    From: BobbyPaulk@comcast.net
    Subject: Hot Cylinder
    I removed my carb recently and re-installed it level. Does any one remember which way to tilt the TOP of the carb. Is it toward the hot cylinder or away from it. I promise to write it down and post it all over my logs. My #6 cylinder is about 150 degrees hotter than the other EGT's which makes the CHT close to 350. I had all the CHT's under 300 at a low cruise of 2450. Bobby ( age 77 ) Zodiac 601 XL "B" Jabiru 3300 S/N 1141 Sensenich 64" x 51" Prop Bing Carb 260 Main & 290 Needle Jet Status - Flying 237 hrs. Do Not Archive


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:24:00 PM PST US
    Subject: Re: Hot Cylinder
    From: "sttwig" <sttwig@gmail.com>
    The following link answers your question about tipping the carb. http://usjabiru.com/wp-content/uploads/2015/03/Tuning_the_Bing_Carburetor_on_Jabiru_Aircraft_Engines.pdf Read this topic online here: http://forums.matronics.com/viewtopic.php?p=443320#443320


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:34:52 PM PST US
    From: "Tim Yoder" <ftyoder@yoderbuilt.com>
    Subject: Hot Cylinder
    Per Pete last week, Tilt tilt the BOTTOM of the carb toward the hot side. Tim _____ From: owner-jabiruengine-list-server@matronics.com [mailto:owner-jabiruengine-list-server@matronics.com] On Behalf Of BobbyPaulk@comcast.net Sent: Tuesday, June 09, 2015 3:41 PM Subject: JabiruEngine-List: Hot Cylinder I removed my carb recently and re-installed it level. Does any one remember which way to tilt the TOP of the carb. Is it toward the hot cylinder or away from it. I promise to write it down and post it all over my logs. My #6 cylinder is about 150 degrees hotter than the other EGT's which makes the CHT close to 350. I had all the CHT's under 300 at a low cruise of 2450. Bobby ( age 77 ) Zodiac 601 XL "B" Jabiru 3300 S/N 1141 Sensenich 64" x 51" Prop Bing Carb 260 Main & 290 Needle Jet Status - Flying 237 hrs. Do Not Archive --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus




    Other Matronics Email List Services

  • Post A New Message
  •   jabiruengine-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/JabiruEngine-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/jabiruengine-list
  • Browse JabiruEngine-List Digests
  •   http://www.matronics.com/digest/jabiruengine-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --