---------------------------------------------------------- JabiruEngine-List Digest Archive --- Total Messages Posted Tue 06/09/15: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:41 PM - Hot Cylinder (BobbyPaulk@comcast.net) 2. 04:24 PM - Re: Hot Cylinder (sttwig) 3. 04:34 PM - Re: Hot Cylinder (Tim Yoder) ________________________________ Message 1 _____________________________________ Time: 03:41:58 PM PST US From: BobbyPaulk@comcast.net Subject: JabiruEngine-List: Hot Cylinder I removed my carb recently and re-installed it level. Does any one remember which way to tilt the TOP of the carb. Is it toward the hot cylinder or away from it. I promise to write it down and post it all over my logs. My #6 cylinder is about 150 degrees hotter than the other EGT's which makes the CHT close to 350. I had all the CHT's under 300 at a low cruise of 2450. Bobby ( age 77 ) Zodiac 601 XL "B" Jabiru 3300 S/N 1141 Sensenich 64" x 51" Prop Bing Carb 260 Main & 290 Needle Jet Status - Flying 237 hrs. Do Not Archive ________________________________ Message 2 _____________________________________ Time: 04:24:00 PM PST US Subject: JabiruEngine-List: Re: Hot Cylinder From: "sttwig" The following link answers your question about tipping the carb. http://usjabiru.com/wp-content/uploads/2015/03/Tuning_the_Bing_Carburetor_on_Jabiru_Aircraft_Engines.pdf Read this topic online here: http://forums.matronics.com/viewtopic.php?p=443320#443320 ________________________________ Message 3 _____________________________________ Time: 04:34:52 PM PST US From: "Tim Yoder" Subject: RE: JabiruEngine-List: Hot Cylinder Per Pete last week, Tilt tilt the BOTTOM of the carb toward the hot side. Tim _____ From: owner-jabiruengine-list-server@matronics.com [mailto:owner-jabiruengine-list-server@matronics.com] On Behalf Of BobbyPaulk@comcast.net Sent: Tuesday, June 09, 2015 3:41 PM Subject: JabiruEngine-List: Hot Cylinder I removed my carb recently and re-installed it level. Does any one remember which way to tilt the TOP of the carb. Is it toward the hot cylinder or away from it. I promise to write it down and post it all over my logs. My #6 cylinder is about 150 degrees hotter than the other EGT's which makes the CHT close to 350. I had all the CHT's under 300 at a low cruise of 2450. Bobby ( age 77 ) Zodiac 601 XL "B" Jabiru 3300 S/N 1141 Sensenich 64" x 51" Prop Bing Carb 260 Main & 290 Needle Jet Status - Flying 237 hrs. Do Not Archive --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message jabiruengine-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/JabiruEngine-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/jabiruengine-list Browse Digests http://www.matronics.com/digest/jabiruengine-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.