Today's Message Index:
----------------------
 
     1. 08:51 AM - Re: Starter issue with 2200 (Frankd)
     2. 12:10 PM - Re: JabiruEngine-List Digest: 3 Msgs - 02/13/17 (BobbyPaulk@comcast.net)
 
 
 

Message 1


					INDEX
 Back to Main INDEX
					NEXT
 Skip to NEXT Message
	LIST
 Reply to LIST Regarding this Message
		SENDER
 Reply to SENDER Regarding this Message

      
      
Time: 
08:51:24 AM PST US
Subject: 
Re: Starter issue with 2200
From: 
"Frankd" <FDucker@aol.com>
      
      
      Good morning Guys,
      thanks for the replies.  
      I did more research and the results exactly match your recommendations. 
      I also contacted the Jabiru USA guys and was told that of all the black starters
      sold there is a pretty high % that have been replaced. 
      
      So.. I will install another grounding wire directly to the body of the starter,
      I have already cleaned and checked the connections from the battery. 
      I use heavy battery cables for all my starter wiring,  so I believe that should
      work. 
      If I continue to have issues I will get a new starter motor,  I have about 100Hrs
      on the engine but given that the silver is a more powerful motor it should
      solve the problem.  I already got a new AeroVoltz battery so I can verify if that
      makes a difference also and see if my original battery does the job. 
      
      Thanks again for your support, nice to be able to go get some advice. 
      Frank
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=466176#466176
      
      

Message 2


					INDEX
 Back to Main INDEX
				PREVIOUS
 Skip to PREVIOUS Message
					NEXT
 Skip to NEXT Message
	LIST
 Reply to LIST Regarding this Message
		SENDER
 Reply to SENDER Regarding this Message

      
      
Time: 
12:10:05 PM PST US
From: 
BobbyPaulk@comcast.net
Subject: 
Re: JabiruEngine-List Digest: 3 Msgs - 02/13/17
      
      Frank, 
      Something I ran into was the 2 bolts holding the starter together had loosened.
      This let the bearings spin in the recess and slowed the starter down to a point
      it would not crank when cold. In turn this led to more problems. I would definitely
      check those bolts routinely and put some Locktite on the nuts. 
      
      
      Bobby ( age 78 ) 
      Zodiac 601 XL "B" 
      Jabiru 3300 S/N 1141 
      Sensenich 64" x 51" Prop 
      Bing Carb 260 Main & 290 Needle Jet 
      Status - Flying 270hrs. 
      
      Do Not Archive 
      
      
      ----- Original Message -----
      








Other Matronics Email List Services




Post A New Message
  
jabiruengine-list@matronics.com
UN/SUBSCRIBE
  
http://www.matronics.com/subscription
List FAQ
  
http://www.matronics.com/FAQ/JabiruEngine-List.htm
Web Forum Interface To Lists
  
http://forums.matronics.com
Matronics List Wiki
  
http://wiki.matronics.com
7-Day List Browse
  
http://www.matronics.com/browse/jabiruengine-list
Browse JabiruEngine-List Digests
  
http://www.matronics.com/digest/jabiruengine-list
Browse Other Lists
  
http://www.matronics.com/browse
Live Online Chat!
  
http://www.matronics.com/chat
Archive Downloading
  
http://www.matronics.com/archives
Photo Share
  
http://www.matronics.com/photoshare
Other Email Lists
  
http://www.matronics.com/emaillists
Contributions
  
http://www.matronics.com/contribution









These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.




-- Please support this service by making your Contribution today! --