----------------------------------------------------------
                           JabiruEngine-List Digest Archive
                                      ---
                     Total Messages Posted Tue 02/14/17: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 08:51 AM - Re: Starter issue with 2200  (Frankd)
     2. 12:10 PM - Re: JabiruEngine-List Digest: 3 Msgs - 02/13/17  (BobbyPaulk@comcast.net)
 
 
 
________________________________  Message 1  _____________________________________


Time: 08:51:24 AM PST US
Subject: JabiruEngine-List: Re: Starter issue with 2200
From: "Frankd" <FDucker@aol.com>


Good morning Guys,
thanks for the replies.  
I did more research and the results exactly match your recommendations. 
I also contacted the Jabiru USA guys and was told that of all the black starters
sold there is a pretty high % that have been replaced. 

So.. I will install another grounding wire directly to the body of the starter,
I have already cleaned and checked the connections from the battery. 
I use heavy battery cables for all my starter wiring,  so I believe that should
work. 
If I continue to have issues I will get a new starter motor,  I have about 100Hrs
on the engine but given that the silver is a more powerful motor it should
solve the problem.  I already got a new AeroVoltz battery so I can verify if that
makes a difference also and see if my original battery does the job. 

Thanks again for your support, nice to be able to go get some advice. 
Frank


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=466176#466176


________________________________  Message 2  _____________________________________


Time: 12:10:05 PM PST US
From: BobbyPaulk@comcast.net
Subject: JabiruEngine-List: Re: JabiruEngine-List Digest: 3 Msgs - 02/13/17

Frank, 
Something I ran into was the 2 bolts holding the starter together had loosened.
This let the bearings spin in the recess and slowed the starter down to a point
it would not crank when cold. In turn this led to more problems. I would definitely
check those bolts routinely and put some Locktite on the nuts. 


Bobby ( age 78 ) 
Zodiac 601 XL "B" 
Jabiru 3300 S/N 1141 
Sensenich 64" x 51" Prop 
Bing Carb 260 Main & 290 Needle Jet 
Status - Flying 270hrs. 

Do Not Archive 


----- Original Message -----

 

-------------------------------------------------------------------------------------
                       Other Matronics Email List Services
-------------------------------------------------------------------------------------
Post A New Message               jabiruengine-list@matronics.com
UN/SUBSCRIBE                     http://www.matronics.com/subscription
List FAQ                         http://www.matronics.com/FAQ/JabiruEngine-List.htm
Web Forum Interface To Lists     http://forums.matronics.com
Matronics List Wiki              http://wiki.matronics.com
Full Archive Search Engine       http://www.matronics.com/search
7-Day List Browse                http://www.matronics.com/browse/jabiruengine-list
Browse Digests                   http://www.matronics.com/digest/jabiruengine-list
Browse Other Lists               http://www.matronics.com/browse
Live Online Chat!                http://www.matronics.com/chat
Archive Downloading              http://www.matronics.com/archives
Photo Share                      http://www.matronics.com/photoshare
Other Email Lists                http://www.matronics.com/emaillists
Contributions                    http://www.matronics.com/contribution
-------------------------------------------------------------------------------------

These Email List Services are sponsored solely by Matronics and through the 
generous Contributions of its members.