Today's Message Index:
----------------------
1. 10:40 AM - Service Bulletins (Bobby Paulk)
2. 10:50 AM - Re: Service Bulletins (Emil Sr)
3. 10:51 AM - Re: Service Bulletins (Dennis W. Wilt)
4. 10:58 AM - Re: Service Bulletins (Rob Turk)
5. 11:08 AM - Re: Service Bulletins (Robert powers)
6. 12:50 PM - Re: Service Bulletins (Linda Mathias)
7. 01:08 PM - Re: Service Bulletins (Larry Fehner)
8. 01:43 PM - Re: Service Bulletins (kayberg@aol.com)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Service Bulletins |
Haven't seen any post on this list in a long time. Hope somebody is still lurking
here. I am doing my annual "Condition" inspection and was wondering if anyone
has info on any late service bulletins or safety issues on the Jabiru 3300.
295 hours. One cylinder ( #3 ) down to 56 / 80#. Looks like it has been loosing
3 or 4 pounds for the last 3 years. Plugs look fine. Cylinder runs about 80
to 100 degrees hotter at certain power settings.
Bobby
Zodiac 601
Jabiru 3300 295 hrs.
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Service Bulletins |
On 4/16/2018 1:40 PM, Bobby Paulk wrote:
>
> Haven't seen any post on this list in a long time. Hope somebody is
> still lurking here. I am doing my annual "Condition" inspection and
> was wondering if anyone has info on any late service bulletins or
> safety issues on the Jabiru 3300. 295 hours. One cylinder ( #3 ) down
> to 56 / 80#. Looks like it has been loosing 3 or 4 pounds for the last
> 3 years. Plugs look fine. Cylinder runs about 80 to 100 degrees hotter
> at certain power settings.
>
>
> Bobby
>
> Zodiac 601
>
> Jabiru 3300 295 hrs.
>
Still here Emil Radtke Pulsar111--------Jabiru 3300 engine
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Service Bulletins |
Bobby,
You should give Arion Aircraft a call about this. They just took over as the US
distributor for Jabiru Engines. Very knowledgeable and good friends with the
prior distributor, Pete Krotje. 931-680-1781
Regards,
Dennis W. Wilt
N616DW (Arion Lightning S/N 132)
-----Original Message-----
From: Bobby Paulk <bobbypaulk@comcast.net>
Sent: Mon, Apr 16, 2018 1:40 pm
Subject: JabiruEngine-List: Service Bulletins
Haven't seen any post on this list in a long time. Hope somebody is still lurking
here. I am doing my annual "Condition" inspection and was wondering if anyone
has info on any late service bulletins or safety issues on the Jabiru 3300.
295 hours. One cylinder ( #3 ) down to 56 / 80#. Looks like it has been loosing
3 or 4 pounds for the last 3 years. Plugs look fine. Cylinder runs about 80
to 100 degrees hotter at certain power settings.
Bobby
Zodiac 601
Jabiru 3300 295 hrs.
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Service Bulletins |
Hi Bobby,
All service bulletins are available on the Jabiru website, see:
http://www.jabiru.net.au/service/service-bulletins
At the end of 2017 several service bulletins received an update to
include reference to the new 'Gen 4' engine, and some minor tweaks here
and there. No new pressing issues have been reported.
Your dropping compression may be a stuck piston ring of some sorts. You
probably want to peek inside with a borescope for any evidence of
scrapes or excessive wear. Don't just ignore it and wait for the 'big
bang' to happen.
Good luck,
Rob
On 4/16/2018 7:40 PM, Bobby Paulk wrote:
>
> Haven't seen any post on this list in a long time. Hope somebody is
> still lurking here. I am doing my annual "Condition" inspection and
> was wondering if anyone has info on any late service bulletins or
> safety issues on the Jabiru 3300. 295 hours. One cylinder ( #3 ) down
> to 56 / 80#. Looks like it has been loosing 3 or 4 pounds for the last
> 3 years. Plugs look fine. Cylinder runs about 80 to 100 degrees hotter
> at certain power settings.
>
>
> Bobby
>
> Zodiac 601
>
> Jabiru 3300 295 hrs.
>
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Service Bulletins |
I have a Arion Lightning with Jabiru 3300. At my inspection #4 cyl was down to
62/80 at 290 hrs. I was told to run the plane at 2850 RPM for 3 hrs straight which
I did but have not checked it .I wish we had more input from other owners.Bob
On Monday, April 16, 2018 10:44 AM, Bobby Paulk <bobbypaulk@comcast.net> wrote:
Haven't seen any post on this list in a long time. Hope somebody is still lurking
here. I am doing my annual "Condition" inspection and was wondering if anyone
has info on any late service bulletins or safety issues on the Jabiru 3300.
295 hours. One cylinder ( #3 ) down to 56 / 80#. Looks like it has been loosing
3 or 4 pounds for the last 3 years. Plugs look fine. Cylinder runs about
80 to 100 degrees hotter at certain power settings.
Bobby
Zodiac 601
Jabiru 3300 295 hrs.
| | Virus-free. www.avast.com |
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Service Bulletins |
Is anyone interested in a HacMan? Still in original wrapper; make me an
offer.
Linda Mathias
Jabiru 3300
On Mon, Apr 16, 2018 at 2:08 PM, Robert powers <boblana@sbcglobal.net>
wrote:
> I have a Arion Lightning with Jabiru 3300. At my inspection #4 cyl was
> down to 62/80 at 290 hrs.
> I was told to run the plane at 2850 RPM for 3 hrs straight which I did but
> have not checked it .
> I wish we had more input from other owners.
> Bob
>
>
> On Monday, April 16, 2018 10:44 AM, Bobby Paulk <bobbypaulk@comcast.net>
> wrote:
>
>
> Haven't seen any post on this list in a long time. Hope somebody is still
> lurking here. I am doing my annual "Condition" inspection and was wondering
> if anyone has info on any late service bulletins or safety issues on the
> Jabiru 3300. 295 hours. One cylinder ( #3 ) down to 56 / 80#. Looks like it
> has been loosing 3 or 4 pounds for the last 3 years. Plugs look fine.
> Cylinder runs about 80 to 100 degrees hotter at certain power settings.
>
> Bobby
> Zodiac 601
> Jabiru 3300 295 hrs.
>
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon> Virus-free.
> www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link>
> <#m_-6403550583859371081_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Service Bulletins |
Linda,
Please contact me at lbnpk3@gmai <mailto:lbnpk3@gmail.com>l dot com as I
am interested
Larry
> On Apr 16, 2018, at 2:50 PM, Linda Mathias <lbmathias1@gmail.com>
wrote:
>
> Is anyone interested in a HacMan? Still in original wrapper; make me
an offer.
>
> Linda Mathias
> Jabiru 3300
>
> On Mon, Apr 16, 2018 at 2:08 PM, Robert powers <boblana@sbcglobal.net
<mailto:boblana@sbcglobal.net>> wrote:
> I have a Arion Lightning with Jabiru 3300. At my inspection #4 cyl was
down to 62/80 at 290 hrs.
> I was told to run the plane at 2850 RPM for 3 hrs straight which I did
but have not checked it .
> I wish we had more input from other owners.
> Bob
>
>
> On Monday, April 16, 2018 10:44 AM, Bobby Paulk
<bobbypaulk@comcast.net <mailto:bobbypaulk@comcast.net>> wrote:
>
>
> Haven't seen any post on this list in a long time. Hope somebody is
still lurking here. I am doing my annual "Condition" inspection and was
wondering if anyone has info on any late service bulletins or safety
issues on the Jabiru 3300. 295 hours. One cylinder ( #3 ) down to 56 /
80#. Looks like it has been loosing 3 or 4 pounds for the last 3 years.
Plugs look fine. Cylinder runs about 80 to 100 degrees hotter at certain
power settings.
>
> Bobby
> Zodiac 601
> Jabiru 3300 295 hrs.
>
>
>
>
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_
campaign=sig-email&utm_content=webmail&utm_term=icon>
Virus-free. www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_
campaign=sig-email&utm_content=webmail&utm_term=link>
<x-msg://17/#m_-6403550583859371081_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Service Bulletins |
I'm guessing you overheated the cylinder and now it is time for a top overhaul.
Most likely it is a valve problem, but you need to deal with it and deal with your
airflow issues.
In my opinion
Doug Koenigsberg
-----Original Message-----
From: Bobby Paulk <bobbypaulk@comcast.net>
Sent: Mon, Apr 16, 2018 1:40 pm
Subject: JabiruEngine-List: Service Bulletins
Haven't seen any post on this list in a long time. Hope somebody is still lurking
here. I am doing my annual "Condition" inspection and was wondering if anyone
has info on any late service bulletins or safety issues on the Jabiru 3300.
295 hours. One cylinder ( #3 ) down to 56 / 80#. Looks like it has been loosing
3 or 4 pounds for the last 3 years. Plugs look fine. Cylinder runs about 80
to 100 degrees hotter at certain power settings.
Bobby
Zodiac 601
Jabiru 3300 295 hrs.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|