---------------------------------------------------------- KIS-List Digest Archive --- Total Messages Posted Mon 06/21/10: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:54 AM - Seeing Matronics List Attachments () 2. 07:04 AM - Re: Seeing Matronics List Attachments (F. Tim Yoder) 3. 09:38 AM - (ted scott) 4. 09:44 AM - KIS CRUISER FOR SALE (ted scott) 5. 12:23 PM - Re: KIS CRUISER FOR SALE (ALFRED ROSA) 6. 03:09 PM - Re: Seeing Matronics List Attachments (Larry David) 7. 08:24 PM - Re: Seeing Matronics List Attachments () ________________________________ Message 1 _____________________________________ Time: 04:54:15 AM PST US From: Subject: KIS-List: Seeing Matronics List Attachments 6/21/2010 Hello Fellow KIS Listers, I wrote: " PS: There is sort of a gotcha. I posted a jpg picture on the KIS list (see here I hope): > > http://forums.matronics.com/viewtopic.php?t=71560 > > and the picture posted just fine except that its layout on the forum was > so huge such that one had to scroll all over the place to find the area of > interest." I have modified (shrunk) the original posted vortex generator picture significantly. Please see if this attached view is better for you. Thanks, 'OC' Baker Says: "The best investment we can make is the time and effort to gather and understand knowledge." ________________________________ Message 2 _____________________________________ Time: 07:04:23 AM PST US From: "F. Tim Yoder" Subject: Re: KIS-List: Seeing Matronics List Attachments 'OC', What are your test results? ( On the vortex generator. ) Tim ----- Original Message ----- From: Sent: Monday, June 21, 2010 4:53 AM Subject: KIS-List: Seeing Matronics List Attachments > 6/21/2010 > > Hello Fellow KIS Listers, I wrote: " PS: There is sort of a gotcha. I > posted > a jpg picture on the KIS list (see here I hope): >> >> http://forums.matronics.com/viewtopic.php?t=71560 >> >> and the picture posted just fine except that its layout on the forum was >> so huge such that one had to scroll all over the place to find the area >> of >> interest." > > I have modified (shrunk) the original posted vortex generator picture > significantly. Please see if this attached view is better for you. > > Thanks, > > 'OC' Baker Says: "The best investment we can make is the time and effort > to > gather and understand knowledge." > ________________________________ Message 3 _____________________________________ Time: 09:38:33 AM PST US From: "ted scott" Subject: KIS-List: I have a Kis TR4 with a new Mattituck all ballancd XP 360 engine and fadec system for sale.Some avionics and instruments.The kit is about 60 % finished.with many other extras.Some of my work is on the kis list.will accept any reasnaable offer. I no longer have a medical. Located in TennesseeTed Scott phone 731 247 5643-email teds532@wk.net ________________________________ Message 4 _____________________________________ Time: 09:44:10 AM PST US From: "ted scott" Subject: KIS-List: KIS CRUISER FOR SALE I HAVE A KIS TR4 SUPER CRUISER FOR SALE WITH A NEW MATTITUCK XP360 ENGINE AND FADEC SYSTEM.SOME AVINICS AND INSTRUMENTS.KIT WAS A FAST BUILD KIT AND IS NOW ABOUT 65% FINISHED.IT HAS BEEN INSPECTED BY AN EAA DAR.I HAVE MANY OTHER OPTIONS.INCLUDING ELECTRIC FLATS AND TRIM,THREE STROBE LIGHTS.CESSNA RUDDER PEDALS, NEW YOKE SYSTEM,HEAT AND AIR TO BACK SEAT. I HAVE ALL CONSTRUCTION PHOTOS. THERE ARE SOME PHOTOS ON THE KIS LIST.SELLING BECAUSE OF MEDICAL PROBLEMS,WILL ACCEPT ANY REASONABLE OFFER. PHONE TED SCOTT 731 247 5643-ERMAIL TEDS532@WK.NET ________________________________ Message 5 _____________________________________ Time: 12:23:38 PM PST US Subject: Re: KIS-List: KIS CRUISER FOR SALE From: ALFRED ROSA Good luck Ted. I know know you put a lot of heart in it. Al On Mon, Jun 21, 2010 at 12:43 PM, ted scott wrote: > I HAVE A KIS TR4 SUPER CRUISER FOR SALE WITH A NEW MATTITUCK XP360 ENGINE > AND FADEC SYSTEM.SOME AVINICS AND INSTRUMENTS.KIT WAS A FAST BUILD KIT AND > IS NOW ABOUT 65% FINISHED.IT HAS BEEN INSPECTED BY AN EAA DAR.I HAVE MANY > OTHER OPTIONS.INCLUDING ELECTRIC FLATS AND TRIM,THREE STROBE LIGHTS.CESSNA > RUDDER PEDALS, NEW YOKE SYSTEM,HEAT AND AIR TO BACK SEAT. I HAVE ALL > CONSTRUCTION PHOTOS. THERE ARE SOME PHOTOS ON THE KIS LIST.SELLING BECAUSE > OF MEDICAL PROBLEMS,WILL ACCEPT ANY REASONABLE OFFER. PHONE TED SCOTT 731 > 247 5643-ERMAIL TEDS532@WK.NET > > * > > * > > ________________________________ Message 6 _____________________________________ Time: 03:09:37 PM PST US From: "Larry David" Subject: Re: KIS-List: Seeing Matronics List Attachments OC, you can shrink the display of the picture by holding the control key do wn and pressing the minus key a couple of times. (This works in Firefox and I assume other browsers.) Of course the accompanying text will shrink also It looks like the device is about 6-8 inches in front of the leading edg e of the tail and the device itself is about 6-8 inches long. Am I guessin g right on the sizing? Larry On 6/21/2010 4:53:24 AM, bakerocb@cox.net wrote: > 6/21/2010 > > Hello Fellow KIS Listers, I wrote: " PS: There is sort of a gotcha. I pos ted > a jpg picture on the KIS list (see here I hope): > > > > http://forums.matronics.com/viewtopic.php?t=71560 > > > > and the picture posted just fine except that its layout on the forum wa s > > so huge such that one had to scroll all over the place to find the area of ________________________________ Message 7 _____________________________________ Time: 08:24:20 PM PST US From: Subject: Re: KIS-List: Seeing Matronics List Attachments 6/21/2010 Hello Larry, Thanks for the picture tip. These vortex generators go on each side of the fuselage in front of the wing. Their purpose is to generate higher energy air in the area of the wing to fuselage juncture. They are more on the order of 4 inches long -- that is all the aluminum angle that I had available. Take a look at the ones on the Cirrus airplanes to see what I am trying to replicate. 'OC' Baker Says: "The best investment we can make is the time and effort to gather and understand knowledge." ============================================== ----- Original Message ----- From: "Larry David" Sent: Monday, June 21, 2010 6:06 PM Subject: Re: KIS-List: Seeing Matronics List Attachments OC, you can shrink the display of the picture by holding the control key down and pressing the minus key a couple of times. (This works in Firefox and I assume other browsers.) Of course the accompanying text will shrink also It looks like the device is about 6-8 inches in front of the leading edge of the tail and the device itself is about 6-8 inches long. Am I guessing right on the sizing? Larry ================================================ On 6/21/2010 4:53:24 AM, bakerocb@cox.net wrote: > 6/21/2010 > > Hello Fellow KIS Listers, I wrote: " PS: There is sort of a gotcha. I > posted > a jpg picture on the KIS list (see here I hope): > > > > http://forums.matronics.com/viewtopic.php?t=71560 > > > > and the picture posted just fine except that its layout on the forum was > > so huge such that one had to scroll all over the place to find the area > > of ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kis-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/KIS-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kis-list Browse Digests http://www.matronics.com/digest/kis-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.