---------------------------------------------------------- KIS-List Digest Archive --- Total Messages Posted Tue 07/13/10: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:53 AM - Re: VG's for a propeller (kent pyle) 2. 07:38 PM - Picture of fillet (Flyinisfun@aol.com) 3. 08:57 PM - Re: Picture of fillet (F. Tim Yoder) ________________________________ Message 1 _____________________________________ Time: 12:53:48 AM PST US From: "kent pyle" Subject: Re: KIS-List: VG's for a propeller Sorry, maybe you need more inlet air. I seem to recall large louvers in the lower side of the cowl of the Super Cruiser to let more engine compartment air out. Kent ----- Original Message ----- From: Randy Ott To: kis-list@matronics.com Sent: Monday, July 12, 2010 10:18 AM Subject: Re: KIS-List: VG's for a propeller I tried it . No noticeable different Sent from my iPhone On Jul 11, 2010, at 6:18 PM, "kent pyle" wrote: Scott, I cut a piece of alumium sheet and used radiator hose clamps to mount it so it would shield the oil pan from the exhaust. Seems to work. Kent ----- Original Message ----- From: Scott Stearns To: kis-list@matronics.com Sent: Sunday, July 11, 2010 2:16 PM Subject: Re: KIS-List: VG's for a propeller It's going well. My main problem is high oil temps. I opened up the cooling exit and added a fixed cowl flap and the CHTs are good now. One of my exhaust pipes runs close to the oil sump which may be heating the oil. The engine also only has 6 or 7 hours on it at flight power so the oil temp may come down with some more time on the engine. My pitch forces seem to be a lot better than the original with my wider chord elevator. I'm getting 130 KIAS at about 110-120 HP without wheel pants. Scott --- On Sun, 7/11/10, F. Tim Yoder wrote: From: F. Tim Yoder Subject: Re: KIS-List: VG's for a propeller To: kis-list@matronics.com Date: Sunday, July 11, 2010, 11:40 AM Scott, How is your testing going? Tim ----- Original Message ----- From: Scott Stearns To: kis-list@matronics.com Sent: Sunday, July 11, 2010 11:07 AM Subject: Re: KIS-List: VG's for a propeller I refuse to put something that ugly on my beautiful polished carbon fiber prince prop. It might work though. Do a search on laminar separation bubbles. That's what they are looking at. Some sailplane guys put that kind of thing on their wings. I would think that it's better to put the tape just prior to the pont of max thickness so you get some laminar flow on the leading edge. Cheers, Scott --- On Sun, 7/11/10, Galin Hernandez wrote: From: Galin Hernandez Subject: KIS-List: VG's for a propeller To: kis-list@matronics.com Date: Sunday, July 11, 2010, 7:46 AM Has anybody used or know about these VG's for a propeller? http://www.aircraftspruce.com/catalog/pdf/1Vortelator.pdf Galin N819PR =nofollow target=_blank>http://www.matronics.com/Navigator?KIS-List et=_blank>http://forums.matronics.com llow target=_blank>http://www.matronics.com/contribution href="http://www.matronics.com/Navigator?KIS-List">http://www.matronics .com/Navigator?KIS-List href="http://forums.matronics.com">http://forums.matronics.com href="http://www.matronics.com/contribution">http://www.matronics.com/c =nofollow target=_blank>http://www.matronics.com/Navigator?KIS-List et=_blank>http://forums.matronics.com llow target=_blank>http://www.matronics.com/contribution href="http://www.matronics.com/Navigator?KIS-List">http://www.matronics .com/Navigator?KIS-List href="http://forums.matronics.com">http://forums.matronics.com href="http://www.matronics.com/contribution">http://www.matronics.com/c ------------------------------------------------------------------------- - - Release Date: 07/10/10 01:36:00 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D ------------------------------------------------------------------------- ----- Checked by AVG - www.avg.com 07/12/10 01:36:00 ________________________________ Message 2 _____________________________________ Time: 07:38:14 PM PST US From: Flyinisfun@aol.com Subject: KIS-List: Picture of fillet Here is an attachment picture of making the wing fillet. How it works compared to the orginal I don't know as I never flew the orginal. Jesse Wright ________________________________ Message 3 _____________________________________ Time: 08:57:59 PM PST US From: "F. Tim Yoder" Subject: Re: KIS-List: Picture of fillet It is a nice looking plane Jessy, How large of a radius is it? I think Julian's was about 8" at the rear. Tim ----- Original Message ----- From: Flyinisfun@aol.com To: kis-list@matronics.com Sent: Tuesday, July 13, 2010 7:36 PM Subject: KIS-List: Picture of fillet Here is an attachment picture of making the wing fillet. How it works compared to the orginal I don't know as I never flew the orginal. Jesse Wright ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kis-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/KIS-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kis-list Browse Digests http://www.matronics.com/digest/kis-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.