KIS-List Digest Archive

Fri 07/16/10


Total Messages Posted: 2



Today's Message Index:
----------------------
 
     1. 09:02 AM - Re: SV: SV: Picture of fillet (Mark Kettering)
     2. 11:41 AM - Re: flap (Richard Trickel)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:02:12 AM PST US
    From: Mark Kettering <mantafs@earthlink.net>
    Subject: Re: Picture of fillet
    Hello Hans, I also don't like to fly in the prestall buffeting or wallowing. I think this gives me a warning that helps keep me at a safe margin above stall speed. I also do not know if better wing root fairings will help reduce this. At times these sort of detail things are very hard to predict. If you do not mind spending the time and effort, give them a try. They do look good! I think they could slightly reduce cruise drag. If they reduce or eliminate the prestall buffeting I think that would not be a good thing but then you can add stall strips if needed. If you are trying to reduced landing distance I would try some other things first. I think the flaps would be more effective if deflected up to 45 degrees. Not only will this increase the lift but it will also increase drag and slightly lower angle of attack. This should allow slight better approaches at a slightly lower speed. Next I would try to improve the brakes if they are not perfectly effective. If you are really into changing things a much larger change would be the addition of a belly flap under the fuselage that extends from the flap on one side to the flap on the other side. If you are really up for a big change I would think about replacing the flaps with split flaps. Split flaps actually are more effective providing lift and higher lift to drag than plain (like we have) flaps and single slotted flaps. Split (or maybe even zap) flaps would have been my choice if I designed a plane like this. Mark -----Original Message----- >From: Hans Christian Erstad <hans-chr.erstad@c2i.net> >Sent: Jul 14, 2010 4:42 PM >To: kis-list@matronics.com >Subject: SV: SV: KIS-List: Picture of fillet > > >Mark > >My KIS is a nose gear version. It could be that the tail dragger behave >differently. > >I don't think an improved fuselage junction will lower the stall speed, but >it will maybe improve the handeling at 10 kts above stall speed? I feel I >always am a bit fast on the final approach, as I don't like to fly in the >speed where the pre-stall warning wobbliness occurs. But, in ground >effect/flare I don't experience the wobbling/unsteadyness. > >Last weekend I went to the Duxford airshow in the UK. All old airplanes >with round fuselages have wing-fuselage fairings that start off with a short >radius at the leading edge and ends with a quite large radius at the rear. > >Regards >Hans Christian > >-----Opprinnelig melding----- >Fra: owner-kis-list-server@matronics.com >[mailto:owner-kis-list-server@matronics.com] P vegne av Mark Kettering >Sendt: 14. juli 2010 16:52 >Til: kis-list@matronics.com >Emne: Re: SV: KIS-List: Picture of fillet > > >Sounds like just about a perfect stall warning to me. I am not saying that >a larger root fillet would not help reduce stall speed. It may. But a good >prestall warning is a very important thing to have. > >If your aircraft is a tail dragger do you have fairings on the gear leg to >fuselage junctions? > >I really like the look of the larger aft wing root fairing. Not really a >big fan of the big fairing at the forward part of the wing root. > >Mark > > >> At stall speed there are noticable pitch buffeting, and if the stick >>is kept in the aft position, the aircraft will sharply drop a wing >>(feels like 90 deg), and I have never attempted to see what hapens >>after this if do not recover from the stall. >> > >


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:41:51 AM PST US
    From: Richard Trickel <richard_trickel@yahoo.com>
    Subject: Re: flap
    Mark |What is a zap- (flap) Rich --- On Fri, 7/16/10, Mark Kettering <mantafs@earthlink.net> wrote: From: Mark Kettering <mantafs@earthlink.net> Subject: Re: SV: SV: KIS-List: Picture of fillet Hello Hans, I also don't like to fly in the prestall buffeting or wallowing.- I think this gives me a warning that helps keep me at a safe margin above stall sp eed. I also do not know if better wing root fairings will help reduce this.- A t times these sort of detail things are very hard to predict.- If you do not mind spending the time and effort, give them a try.- They do look goo d!- I think they could slightly reduce cruise drag.- If they reduce or eliminate the prestall buffeting I think that would not be a good thing but then you can add stall strips if needed. If you are trying to reduced landing distance I would try some other things first.- I think the flaps would be more effective if deflected up to 45 degrees.- Not only will this increase the lift but it will also increase drag and slightly lower angle of attack.- This should allow slight better approaches at a slightly lower speed.- Next I would try to improve the b rakes if they are not perfectly effective. If you are really into changing things a much larger change would be the ad dition of a belly flap under the fuselage that extends from the flap on one side to the flap on the other side.- If you are really up for a big chan ge I would think about replacing the flaps with split flaps.- Split flaps actually are more effective providing lift and higher lift to drag than pl ain (like we have) flaps and single slotted flaps.- Split (or maybe even zap) flaps would have been my choice if I designed a plane like this. Mark -----Original Message----- >From: Hans Christian Erstad <hans-chr.erstad@c2i.net> >Sent: Jul 14, 2010 4:42 PM >To: kis-list@matronics.com >Subject: SV: SV: KIS-List: Picture of fillet > 2i.net> > >Mark > >My KIS is a nose gear version.- It could be that the tail dragger behave >differently.--- > >I don't think an improved fuselage junction will lower the stall speed, bu t >it will maybe improve the handeling at 10 kts above stall speed?- I feel I >always am a bit fast on the final approach, as I don't like to fly in the >speed where the pre-stall warning wobbliness occurs.- But, in ground >effect/flare I don't experience the wobbling/unsteadyness. > >Last weekend I went to the Duxford airshow in the UK.- All old airplanes >with round fuselages have wing-fuselage fairings that start off with a sho rt >radius at the leading edge and ends with a quite large radius at the rear. - > >Regards >Hans Christian > >-----Opprinnelig melding----- >Fra: owner-kis-list-server@matronics.com >[mailto:owner-kis-list-server@matronics.com] P=E5 vegne av Mark Kettering >Sendt: 14. juli 2010 16:52 >Til: kis-list@matronics.com >Emne: Re: SV: KIS-List: Picture of fillet > > >Sounds like just about a perfect stall warning to me.- I am not saying t hat >a larger root fillet would not help reduce stall speed.- It may.- But a good >prestall warning is a very important thing to have. > >If your aircraft is a tail dragger do you have fairings on the gear leg to >fuselage junctions? > >I really like the look of the larger aft wing root fairing.- Not really a >big fan of the big fairing at the forward part of the wing root. > >Mark > > >> At stall speed there are noticable pitch buffeting, and if the stick >>is kept in the aft position, the aircraft will sharply drop a wing >>(feels like 90 deg), and I have never attempted to see what hapens >>after this if do not recover from the stall. >> > > le, List Admin. =0A=0A=0A




    Other Matronics Email List Services

  • Post A New Message
  •   kis-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/KIS-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/kis-list
  • Browse KIS-List Digests
  •   http://www.matronics.com/digest/kis-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --