---------------------------------------------------------- KIS-List Digest Archive --- Total Messages Posted Sun 10/31/10: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:12 AM - D-subminiature Connectors () ________________________________ Message 1 _____________________________________ Time: 06:12:30 AM PST US From: Subject: KIS-List: D-subminiature Connectors 10/30/2010 Hello Fergus, Got the picture. Here is a solution. Go to the Chapman Mfg Co web site: http://www.chapmanmfg.com/ On that web site you will find that one of their tools is a very clever, short swing ratchet. Specifically this tool here: http://www.chapmanmfg.com/aboutourtools.html This ratchet is used by putting one of the hex drive adapters into the ratchet. If the adapter is put into the ratchet from one side the ratchet will rotate the adapter clockwise (in). If the adapter is put into the ratchet from the other side the ratchet will rotate the adapter counterclockwise (out). You can start the hex socket drive 4-40 machine screw either by hand or by using the adapter as a handle for the machine screw. Once the screw is started, and there is enough friction to permit the ratchet to function as a ratchet, you can put the adapter into the ratchet, feel the adapter into the screw head socket, and ratchet away to tighten the machine screw. Chapman standard kit # 4320 should get you started, but you might want to look over some of the other kits available as well. I keep one Chapman kit in the hangar and one Chapman kit in my pickup truck. I need to handle both hex socket drive machine screws and Torx drive machine screws. 'OC' Baker Says: "The best investment we can make is the time and effort to gather and understand knowledge." PS: I keep one of these kits with me in my airplane at all times as my airplane makes extensive use of hex socket and Torx drive screws. You may prefer one of these kits to the Chapman kits: http://www.newmantools.com/wfmc.htm ============================================== ----- Original Message ----- From: "Fergus Kyle" Sent: Saturday, October 30, 2010 10:08 AM Subject: FW: D-subminiature Connectors > OC: > > Thanks for your quick and complete treatise on the D-sub > dilemma....! > > My problem is the application of D-sub components in modules buried > in the instrument panel such that the connectors must be applied backwards > (i.e: from the front of the aircraft BACK onto the sockets on the Front of > the modules with one hand in the sub-panel. Thus only screws which can be > applied by the one hand BACKWARDS from the seat may be used. I chose 3/16" > hex for the heads of same because I can hand-tighten them then apply a > small > 3/16" wrench to fully tighten same. It's hard to explain, but slotted or > hexhead holes won't work due to components nearby. > > Hope this came out OK. Dotted line is the route to tighten screw > despite obstruction, i.e: No room for in-line tightener such as slotted > driver, etc. > > All the best > > Ferg ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kis-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/KIS-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kis-list Browse Digests http://www.matronics.com/digest/kis-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.