Today's Message Index:
----------------------
1. 10:12 AM - to those that still have matco brakes... (Scott Stearns)
2. 08:34 PM - Re: to those that still have matco brakes... (F. Tim Yoder)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | to those that still have matco brakes... |
Matco makes a 'brake intensifier kit' for the master cylinders.- It's bas
ically a sleeve that lets you use a smaller piston so-you get more brake
pressure per foot pressure.
-
I got the kit and installed it.- It's not a night and day difference, but
a noticable improvment.- Without the kit my matco brakes were inadequate
, but I would call them acceptable with the kit.-
-
The kit is complete, but for some reason that I don't understand they make
the customer trim down the sleeve to fit.- The kits are only $16 so I'd r
ecomment buying and extra one in case the sleeve trimming doesn't go well o
n one.-
-
Scott=0A=0A=0A
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: to those that still have matco brakes... |
Scott,
I did the same with the same result. If you used the kit supplied break
peddles, you will get a better boost in performance by moving the master
cylinder attach point as close to the rudder bar as possible. I was able
to move mine about 1/2" and it made a big improvement. This was
recommended by George Happ (Matco).
Tim
----- Original Message -----
From: Scott Stearns
To: kis-list@matronics.com
Sent: Sunday, January 09, 2011 11:10 AM
Subject: KIS-List: to those that still have matco brakes...
Matco makes a 'brake intensifier kit' for the master cylinders.
It's basically a sleeve that lets you use a smaller piston so you get
more brake pressure per foot pressure.
I got the kit and installed it. It's not a night and day
difference, but a noticable improvment. Without the kit my matco brakes
were inadequate, but I would call them acceptable with the kit.
The kit is complete, but for some reason that I don't understand
they make the customer trim down the sleeve to fit. The kits are only
$16 so I'd recomment buying and extra one in case the sleeve trimming
doesn't go well on one.
Scott
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|