KIS-List Digest Archive

Thu 10/13/11


Total Messages Posted: 1



Today's Message Index:
----------------------
 
     1. 04:00 PM - Re: Door hinge? (Galin Hernandez)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:00:06 PM PST US
    From: Galin Hernandez <galinhdz@gmail.com>
    Subject: Re: Door hinge?
    I contacted Lyle Hendricks to see if he made the original hinges. I sent him a detailed drawing with dimensions and photos of my broken hinge. He will check and see if he has the setup needed to make a production run. If not, he can still do it but at a higher cost. He also said that the bigger the production run the lower the individual cost will be and that the minimum run is 8 units. He estimates that for 8 units the cost will be about $40.00 for each hinge. He also said he can have them made up in about 2weeks. If you want new hinges let me know so I can try to convince him to make a production run and maybe get a lower price per hinge. Galin On Mon, Oct 10, 2011 at 7:24 PM, ALFRED ROSA <fredorosa@gmail.com> wrote: > I would guess Lyle made them. Rich would know. > > Al > > > On Mon, Oct 10, 2011 at 7:08 PM, Galin Hernandez <galinhdz@gmail.com>wrote: > >> Well that means we need at least 4 hinges. Maybe was can get some machine >> company (Like Hendricks) to make a batch of them. The more we have made up >> the better the price will be. Plus, it will provide us a place we can get >> more if we need them in the future. >> >> Galin >> >> On Mon, Oct 10, 2011 at 4:45 PM, ALFRED ROSA <fredorosa@gmail.com> wrote: >> >>> I could use a set too. The passenger side door bumps the top when fully >>> open so I need to drill the holes in the hinge in a different location. >>> >>> Al >>> >>> On Mon, Oct 10, 2011 at 3:06 PM, Galin Hernandez <galinhdz@gmail.com>wrote: >>> >>>> Where can I get a set of door hinges for the KIS-4? The hinge pin on my >>>> copilot door sheared off. Since I will have to replace it, I might as well >>>> replace both of them. Were the original ones made up by Lyle Hendricks? >>>> >>>> Galin >>>> >>>> * >>>> >>>> et="_blank">http://www.matronics.com/Navigator?KIS-List >>>> tp://forums.matronics.com >>>> _blank">http://www.matronics.com/contribution >>>> * >>>> >>>> >>> * >>> >>> et="_blank">http://www.matronics.com/Navigator?KIS-List >>> tp://forums.matronics.com >>> _blank">http://www.matronics.com/contribution >>> * >>> >>> >> * >> >> et="_blank">http://www.matronics.com/Navigator?KIS-List >> tp://forums.matronics.com >> _blank">http://www.matronics.com/contribution >> * >> >> > * > > * > >




    Other Matronics Email List Services

  • Post A New Message
  •   kis-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/KIS-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/kis-list
  • Browse KIS-List Digests
  •   http://www.matronics.com/digest/kis-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --