KIS-List Digest Archive

Fri 10/14/11


Total Messages Posted: 5



Today's Message Index:
----------------------
 
     1. 05:09 AM - Re: Door hinge? (ALFRED ROSA)
     2. 03:19 PM - Trade-A-Plane Ad (Galin Hernandez)
     3. 04:58 PM - Re: Trade-A-Plane Ad (Rob)
     4. 05:31 PM - Re: Trade-A-Plane Ad (Galin Hernandez)
     5. 05:56 PM - Re: Trade-A-Plane Ad (Scott Stearns)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:09:10 AM PST US
    Subject: Re: Door hinge?
    From: ALFRED ROSA <fredorosa@gmail.com>
    Galin, I solved my problem using the original hinges so I wont need new ones. You might be able to bring a hinge to a local machine shop to make a pair at less cost. Also, if you can get away with just one side of the hinge new it would further reduce costs. Al On Thu, Oct 13, 2011 at 6:59 PM, Galin Hernandez <galinhdz@gmail.com> wrote: > I contacted Lyle Hendricks to see if he made the original hinges. I sent > him a detailed drawing with dimensions and photos of my broken hinge. He > will check and see if he has the setup needed to make a production run. If > not, he can still do it but at a higher cost. He also said that the bigger > the production run the lower the individual cost will be and that the > minimum run is 8 units. He estimates that for 8 units the cost will be about > $40.00 for each hinge. He also said he can have them made up in about > 2weeks. > > If you want new hinges let me know so I can try to convince him to make a > production run and maybe get a lower price per hinge. > > Galin > > > On Mon, Oct 10, 2011 at 7:24 PM, ALFRED ROSA <fredorosa@gmail.com> wrote: > >> I would guess Lyle made them. Rich would know. >> >> Al >> >> >> On Mon, Oct 10, 2011 at 7:08 PM, Galin Hernandez <galinhdz@gmail.com>wrote: >> >>> Well that means we need at least 4 hinges. Maybe was can get some machine >>> company (Like Hendricks) to make a batch of them. The more we have made up >>> the better the price will be. Plus, it will provide us a place we can get >>> more if we need them in the future. >>> >>> Galin >>> >>> On Mon, Oct 10, 2011 at 4:45 PM, ALFRED ROSA <fredorosa@gmail.com>wrote: >>> >>>> I could use a set too. The passenger side door bumps the top when fully >>>> open so I need to drill the holes in the hinge in a different location. >>>> >>>> Al >>>> >>>> On Mon, Oct 10, 2011 at 3:06 PM, Galin Hernandez <galinhdz@gmail.com>wrote: >>>> >>>>> Where can I get a set of door hinges for the KIS-4? The hinge pin on my >>>>> copilot door sheared off. Since I will have to replace it, I might as well >>>>> replace both of them. Were the original ones made up by Lyle Hendricks? >>>>> >>>>> Galin >>>>> >>>>> * >>>>> >>>>> et="_blank">http://www.matronics.com/Navigator?KIS-List >>>>> tp://forums.matronics.com >>>>> _blank">http://www.matronics.com/contribution >>>>> * >>>>> >>>>> >>>> * >>>> >>>> et="_blank">http://www.matronics.com/Navigator?KIS-List >>>> tp://forums.matronics.com >>>> _blank">http://www.matronics.com/contribution >>>> * >>>> >>>> >>> * >>> >>> et="_blank">http://www.matronics.com/Navigator?KIS-List >>> tp://forums.matronics.com >>> _blank">http://www.matronics.com/contribution >>> * >>> >>> >> * >> >> et="_blank">http://www.matronics.com/Navigator?KIS-List >> tp://forums.matronics.com >> _blank">http://www.matronics.com/contribution >> * >> >> > * > > * > >


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:19:19 PM PST US
    From: Galin Hernandez <galinhdz@gmail.com>
    Subject: Trade-A-Plane Ad
    Anybody know details about this TR-1 (N175CT) for sale on Trade-A-Plane? http://www.trade-a-plane.com/listing?id=1392435 Galin


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:58:17 PM PST US
    From: Rob <punchy@frontiernet.net>
    Subject: Re: Trade-A-Plane Ad
    The picture is a lot like one that was in Barnstormers awhile back. It was also located in Nevada but It must have had a different N number because when I checked the N number on Landings and the FAA site it was for a Jet aircraft (strange) a few days later the ad on Barnstormers was gone (also strange) Rob On 10/14/2011 3:18 PM, Galin Hernandez wrote: > Anybody know details about this TR-1 (N175CT) for sale on Trade-A-Plane? > > http://www.trade-a-plane.com/listing?id=1392435 > > Galin > * > > > *


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:31:54 PM PST US
    From: Galin Hernandez <galinhdz@gmail.com>
    Subject: Re: Trade-A-Plane Ad
    Hmmmmmmmmmmmmm Interesting On Fri, Oct 14, 2011 at 6:57 PM, Rob <punchy@frontiernet.net> wrote: > The picture is a lot like one that was in Barnstormers awhile back. It > was also located in Nevada but It must have had a different N number because > when I checked the N number on Landings and the FAA site it was for a > Jet aircraft (strange) a few days later the ad on Barnstormers was gone > (also strange) > > Rob > > > On 10/14/2011 3:18 PM, Galin Hernandez wrote: > > Anybody know details about this TR-1 (N175CT) for sale on Trade-A-Plane? > > http://www.trade-a-plane.com/listing?id=1392435 > > Galin > > * > > * > > > * > > * > >


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:56:57 PM PST US
    From: Scott Stearns <sstearns2@yahoo.com>
    Subject: Re: Trade-A-Plane Ad
    The bullet hole stickers are a nice touch. Scott On Oct 14, 2011, at 4:57 PM, Rob <punchy@frontiernet.net> wrote: > The picture is a lot like one that was in Barnstormers awhile back. It wa s also located in Nevada but It must have had a different N number because w hen I checked the N number on Landings and the FAA site it was for a > Jet aircraft (strange) a few days later the ad on Barnstormers was gone ( also strange) > > Rob > > On 10/14/2011 3:18 PM, Galin Hernandez wrote: >> >> Anybody know details about this TR-1 (N175CT) for sale on Trade-A-Plane? >> >> http://www.trade-a-plane.com/listing?id=1392435 >> >> Galin >> >> >> > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= >




    Other Matronics Email List Services

  • Post A New Message
  •   kis-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/KIS-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/kis-list
  • Browse KIS-List Digests
  •   http://www.matronics.com/digest/kis-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --