Today's Message Index:
----------------------
0. 12:21 AM - Contributions Down By 20%... (Matt Dralle)
1. 04:57 AM - Guden Strut Pressure ()
Message 0
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Contributions Down By 20%... |
Dear Listers,
As of today, Contributions to the Matronics List Fund Raiser are lagging behind
last year at this time by roughly 20%. I have a Fund Raiser each year simply
to cover my operating costs for the Lists. I *do not* accept any advertising
income to support the Lists and rely solely on the Contributions of members to
keep the expenses paid.
I run all of my own servers and they are housed here locally, and the Internet
connection is a commercial-grade, T1 connection with public address space. I
also maintain a full backup system that does nightly backups of all List-related
data so that in the event of a server crash, all of the Lists and the many
years of List archive data could be restored onto a new server in a matter of
hours.
All of this costs a fair amount of money, not to mention a significant amount of
my personal time. I have a Fund Raiser each year to cover these costs and I
ask that members that feel they receive a benefit from my investments make a
modest Contribution each year to support the continued operation and upgrade of
these services.
If you enjoy the Lists, please make a Contribution today. I also offer some incentive
gifts for larger Contribution levels. At the Contribution Web Site, you
can use a credit card, Paypal, or personal check to show your support for the
continuation of these services:
http://www.matronics.com/contribution
Or, drop a personal check in the mail to:
Matt Dralle / Matronics
581 Jeannie Way
Livermore CA 94550
Thank you for your support!
Matt Dralle
Matronics Email List Administrator
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Guden Strut Pressure |
11/23/2011
Hello Rob, Copied below are your initial email, my two responding emails,
and then your November 22, 2011 follow up email question regarding strut
pressure.
If you go to the Guden web site and search for the struts that I presently
have on my KIS TR-1 you will wind up here:
http://www.guden.com/Home/SiteSearch?SideSearchText=GGS22-030-K
which will give you all of the specifications on my presently installed
struts including the 30 PSI pressure.
This page will give you multiple choices among these struts:
http://www.guden.com/ItemDisplay/GS5
so that you can pick struts with higher pressure if you wish.
Guden has always been very receptive to my ordering small amounts of their
products when I order by phone. 1-800-344-6437
Please let me know if I can be of further help.
OC
===============================================================
10/17/2011
Hello Rob, Here are the Guden gas springs that I have on my KIS TR-1 doors
now.
http://www.guden.com/Item/GGS22-030-K
OC
================================================
> 10/15/2011
>
> Hello Rob, Looking at my Guden packing list from back in 02/16/2000 I
> ordered two of these gas springs:
>
> Guden Item: GGS21-030-K
> ...GGS21-030-K Item Detail Rod Dia: .315Tube Dia: .748 Stroke Length:
> 3.500Extended Length: 11.900 P1 Force: 30 ...
>
> I have since ordered replacement gas springs, but can not be certain
> that I ordered the same ones until I go out to the airport to check (maybe
> Monday).
>
> One thing to consider is that the fastening points that I used on my
> door frame and fuselage opening may be different from yours and that could
> affect your gas spring selection. You can search around on the Guden site
> for what will suit you. See here:
>
>
> http://www.guden.com/Control/About%20Us
>
>
> http://www.guden.com/ItemDisplay/GS5
>
>
> 'OC' Baker Says: "The best investment we can make is the time and effort
> to gather and understand knowledge."
>
> =========================================================
>
> From: "Rob" To: Sent: Friday, October 14, 2011 8:06 PM
> Subject: New Gas Springs For KIS TR1
>
>
>>I believe that you mentioned ordering gas springs from over the phone from
>>Guden? I was wondering if you could remember the model number as I am
>> sure if they fit your TR1 they should also fit mine.
>>
>>
>> Rob
========================================================
From: "Rob" <punchy@frontiernet.net>
Sent: Tuesday, November 22, 2011 11:40 PM
Subject: Door Struts for the KIS TR1
> OC, I got your email a while back for the location of your supplier for
> the Struts (Guden) but I don't believe you told me
> what amount of pressure you chose?
>
> I thought I heard someone say about 35-40 lbs but I am not sure if that
> was correct or if it was even for the TR1?
>
> What did you use? I guess there is a limit at which you get too hard to
> close or will not hold up the door very well
> or will hold the door but will sooner than later lose the ability to hold
> the door (not enough pressure to last beyond several years)?
>
> I just took one off today to get the right size and now need to know how
> much pressure to get.
>
>
> Any input on this would be appreciated as I am tired of having the door
> fall down on me as I am getting in or out of the
> plane.
>
> Rob
>
>
> PS: just replaced the impulse mag with the latest Pmag on the Lycooming
> 0320 and I am now in the process of getting
> it checked out before leaving the ground with it.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|