---------------------------------------------------------- KIS-List Digest Archive --- Total Messages Posted Wed 05/09/12: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:28 PM - Re: KIS 150 (Robert Reed) 2. 02:41 PM - Re: Re: KIS 150 (Scott Stearns) 3. 03:38 PM - Re: Re: KIS 150 (Bruce Barton) 4. 04:34 PM - Re: Re: KIS 150 (Kent Pyle) ________________________________ Message 1 _____________________________________ Time: 02:28:41 PM PST US From: Robert Reed Subject: KIS-List: Re: KIS 150 Bruce,=0A=0ANot sure if the KIS-150 is the same as the two place original K IS 2 place but I =0Abelieve it is.- If so, my web site is probably the be st source for photos and =0Aother information on the plane.- When KIS was bought out by Pulsar the downward =0Aslide for the kit began and continued until the point where I currently beleive =0Athe plane is no longer being produced.- Too bad, it was a very nice aircraft =0Adesign.- =0A=0A=0ATh ere are two newsgroups that you may want to join that would hopefully provi de =0Ahelp and leads to parts.=0A=0APulsar-Aviators@yahoogroups.com=0A- =0Akis-list@matronics.com=0A-=0AThe Pulsar group is probably more into th e original Pulsar and later versions of =0Athe Pulsar than the TRI-R KIS de sign.- The KIS-LIS@Matronics.com will be more =0Ahelpful for the TRI-R KI S-TR1 (150) and the KIS-TR4 Super Cruiser.- Some parts =0Afor these plane s are available from builders who have either quit building or =0Amay have damaged their planes and are selling the parts.- If these newsgroups =0Ad on't help I may have sources to some of the builders list but would prefer to =0Anot use that at this time.=0A-=0ABob Reed=0A-=0A-=0A-=0A- =0A-=0A=0A=0A=0A=0A________________________________=0AFrom: Bruce Barton =0ATo: robertr237@att.net=0ACc: Bruce Barton =0ASent: Wed, May 9, 2012 2:46:19 PM=0ASubject: KIS 150 =0A=0A=0AHello,=0AI came across your site and am struggling to find informa tion on a KIS 150 I =0Ahave that needs work.- I love the thing but cant s eem to find any information on =0Ait.- I did get a limited set of plans f rom a gentleman named Dr MacDermoth, but =0Ahe too has little information. =0A=0AI also spoke with Degani's wife back east and she gave me an email wh ich I tried =0Ato reach with no success.- Is there anyone still at the fa ctory or has it ceased =0Asince he passed?=0A=0AI need misc parts (ailerons , flaps, etc.) and either need plans or parts.- I =0Awould really appreci ate it if you have any advise, and I love your site- Good =0Ajob.=0A=0AThan ks again!=0A=0ABruce N Barton=0A702-596-6860=0A=0AI have skype and messenge r if that helps too.=0A=0AThanks Again! ________________________________ Message 2 _____________________________________ Time: 02:41:46 PM PST US From: Scott Stearns Subject: Re: KIS-List: Re: KIS 150 Bruce, Where are you located? I have some parts. Flaps and ailerons are easy to m ake since they are flat triangle sections. What parts do you need? The win dows are still available from the original manufacturer. Scott On May 9, 2012, at 2:27 PM, Robert Reed wrote: > Bruce, > > Not sure if the KIS-150 is the same as the two place original KIS 2 place b ut I believe it is. If so, my web site is probably the best source for phot os and other information on the plane. When KIS was bought out by Pulsar th e downward slide for the kit began and continued until the point where I cur rently beleive the plane is no longer being produced. Too bad, it was a ver y nice aircraft design. > > There are two newsgroups that you may want to join that would hopefully pr ovide help and leads to parts. > > Pulsar-Aviators@yahoogroups.com > > > kis-list@matronics.com > > > > The Pulsar group is probably more into the original Pulsar and later versi ons of the Pulsar than the TRI-R KIS design. The KIS-LIS@Matronics.com will be more helpful for the TRI-R KIS-TR1 (150) and the KIS-TR4 Super Cruiser. Some parts for these planes are available from builders who have either qui t building or may have damaged their planes and are selling the parts. If t hese newsgroups don't help I may have sources to some of the builders list b ut would prefer to not use that at this time. > > > > Bob Reed > > > > > > > > > > > > > > From: Bruce Barton > To: robertr237@att.net > Cc: Bruce Barton > Sent: Wed, May 9, 2012 2:46:19 PM > Subject: KIS 150 > > Hello, > I came across your site and am struggling to find information on a KIS 150 I have that needs work. I love the thing but cant seem to find any informa tion on it. I did get a limited set of plans from a gentleman named Dr MacD ermoth, but he too has little information. > > I also spoke with Degani's wife back east and she gave me an email which I tried to reach with no success. Is there anyone still at the factory or ha s it ceased since he passed? > > I need misc parts (ailerons, flaps, etc.) and either need plans or parts. I would really appreciate it if you have any advise, and I love your site- G ood job. > > Thanks again! > > Bruce N Barton > 702-596-6860 > > I have skype and messenger if that helps too. > > Thanks Again! > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 3 _____________________________________ Time: 03:38:20 PM PST US From: Bruce Barton Subject: Re: KIS-List: Re: KIS 150 Robert, Thanks for the response!- I'll be in touch.- maybe if youre free one af ternoon we could talk on the phone?- I never did get too good with the co mputer.- More used to tailwheels and such! Thanks! Bruce 702-596-6860 --- On Wed, 5/9/12, Robert Reed wrote: From: Robert Reed Subject: KIS-List: Re: KIS 150 Bruce,=0A-=0ANot sure if the KIS-150 is the same as the two place origina l KIS 2 place but I believe it is.- If so, my web site is probably the be st source for photos and other information on the plane.- When KIS was bo ught out by Pulsar the downward slide for the kit began and continued until the point where I currently beleive the plane is no longer being produced. - Too bad, it was a very nice aircraft design.- =0A-=0AThere are two newsgroups that you may want to join that would hopefully provide help and leads to parts.=0A-=0APulsar-Aviators@yahoogroups.com=0A-=0Akis-list@ma tronics.com=0A-=0AThe Pulsar group is probably more into the original Pul sar and later versions of the Pulsar than the TRI-R KIS design.- The KIS- LIS@Matronics.com will be more helpful for the TRI-R KIS-TR1 (150) and the KIS-TR4 Super Cruiser.- Some parts for these planes are available from bu ilders who have either quit building or may have damaged their planes and a re selling the parts.- If these newsgroups don't help I may have sources to some of the builders list but would prefer to not use that at this time. =0A-=0ABob Reed=0A-=0A-=0A-=0A-=0A-=0A =0A =0A=0A=0AFrom: Bruce Barton Cc: Bruce Barton Sent: Wed, May 9, 2012 2:46:19 PM Subject: KIS 150 =0A=0A=0A=0AHello, I came across your site and am struggling to find information on a KIS 150 I have that needs work.- I love the thing but cant seem to find any infor mation on it.- I did get a limited set of plans from a gentleman named Dr MacDermoth, but he too has little information. I also spoke with Degani's wife back east and she gave me an email which I tried to reach with no success.- Is there anyone still at the factory or has it ceased since he passed? I need misc parts (ailerons, flaps, etc.) and either need plans or parts. - I would really appreciate it if you have any advise, and I love your si te- Good job. Thanks again! Bruce N Barton 702-596-6860 I have skype and messenger if that helps too. =====================0A=0A ________________________________ Message 4 _____________________________________ Time: 04:34:22 PM PST US From: "Kent Pyle" Subject: Re: KIS-List: Re: KIS 150 Bob, this is the first I have had on the KIS-list in sometime. I thought I had been dropped or whatever. Kent 200 hours and counting!! From: Bruce Barton Sent: Wednesday, May 09, 2012 3:36 PM Subject: Re: KIS-List: Re: KIS 150 Robert, Thanks for the response! I'll be in touch. maybe if youre free one afternoon we could talk on the phone? I never did get too good with the computer. More used to tailwheels and such! Thanks! Bruce 702-596-6860 --- On Wed, 5/9/12, Robert Reed wrote: From: Robert Reed Subject: KIS-List: Re: KIS 150 To: "Bruce Barton" Date: Wednesday, May 9, 2012, 2:27 PM Bruce, Not sure if the KIS-150 is the same as the two place original KIS 2 place but I believe it is. If so, my web site is probably the best source for photos and other information on the plane. When KIS was bought out by Pulsar the downward slide for the kit began and continued until the point where I currently beleive the plane is no longer being produced. Too bad, it was a very nice aircraft design. There are two newsgroups that you may want to join that would hopefully provide help and leads to parts. wlmailhtml:/mc/compose?to=Pulsar-Aviators@yahoogroups.com wlmailhtml:/mc/compose?to=kis-list@matronics.com The Pulsar group is probably more into the original Pulsar and later versions of the Pulsar than the TRI-R KIS design. The wlmailhtml:/mc/compose?to=KIS-LIS@Matronics.com will be more helpful for the TRI-R KIS-TR1 (150) and the KIS-TR4 Super Cruiser. Some parts for these planes are available from builders who have either quit building or may have damaged their planes and are selling the parts. If these newsgroups don't help I may have sources to some of the builders list but would prefer to not use that at this time. Bob Reed ------------------------------------------------------------------------ From: Bruce Barton To: robertr237@att.net Cc: Bruce Barton Sent: Wed, May 9, 2012 2:46:19 PM Subject: KIS 150 Hello, I came across your site and am struggling to find information on a KIS 150 I have that needs work. I love the thing but cant seem to find any information on it. I did get a limited set of plans from a gentleman named Dr MacDermoth, but he too has little information. I also spoke with Degani's wife back east and she gave me an email which I tried to reach with no success. Is there anyone still at the factory or has it ceased since he passed? I need misc parts (ailerons, flaps, etc.) and either need plans or parts. I would really appreciate it if you have any advise, and I love your site- Good job. Thanks again! Bruce N Barton 702-596-6860 I have skype and messenger if that helps too. Thanks Again! ="http://www.matronics.com/Navigator?KIS-List">http://www.matronics.com /Net="_blank" href="http://forums.matronics.com">http://forums.matronics.-> ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kis-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/KIS-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kis-list Browse Digests http://www.matronics.com/digest/kis-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.