Today's Message Index:
----------------------
1. 12:13 AM - Re: New Instrument Panel (Scott Stearns)
2. 08:01 AM - Re: New Instrument Panel (Galin Hernandez)
3. 08:04 AM - Re: New Instrument Panel (Galin Hernandez)
4. 09:28 AM - Re: New Instrument Panel (Kent Pyle)
5. 09:41 AM - Re: New Instrument Panel (Scott Stearns)
6. 10:25 AM - Re: New Instrument Panel (Robert Reed)
7. 11:42 AM - Re: New Instrument Panel (Galin Hernandez)
8. 02:13 PM - Re: New Instrument Panel (Scott Stearns)
9. 03:20 PM - Re: New Instrument Panel (Galin Hernandez)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: New Instrument Panel |
How does it do when you accelerate down the runway or when you turn while ta
xiing?
What about in turbulence? My dynon attitude data has problems in all these
areas.
The rest of the functions work well though.
Scott
On Aug 19, 2012, at 12:15 PM, Galin Hernandez <galinhdz@gmail.com> wrote:
> Interesting. I fly behind a Dynon D6 as my attitude indicator and it is de
ad on. I did have to rotate it ever so slightly when I initially installed i
t to compensate for mounting errors but otherwise it was an easy instal.
>
> Galin
>
> On Sun, Aug 19, 2012 at 10:44 AM, Scott Stearns <sstearns2@yahoo.com> wrot
e:
> I have the dynon D100 and D180. They work well but the attitude informati
on is not up to aviation standards. Hopefully thier new stuff is better....
>
> Scott
>
>
>
> On Aug 18, 2012, at 9:43 PM, Galin Hernandez <galinhdz@gmail.com> wrote:
>
>> All;
>>
>> I am finally getting started on my new instrument panel. It will be based
around the DYNON Skyview system with 2ea 7" displays. I will post updates a
s they happen on our web page.
>>
>> http://www.puertoricoflyer.com/glass_panel_instal.html
>>
>> Galin
>>
>>
>> href="http://www.matronics.com/Navigator?KIS-List">http://www.matronics
.com/Navigator?KIS-List
>> href="http://forums.matronics.com">http://forums.matronics.com
>> href="http://www.matronics.com/contribution">http://www.matronics.com/c
ontribution
>>
>
>
> et="_blank">http://www.matronics.com/Navigator?KIS-List
> ttp://forums.matronics.com
> _blank">http://www.matronics.com/contribution
>
>
>
>
==========================
=========
==========================
=========
==========================
=========
==========================
=========
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: New Instrument Panel |
Scott;
I have never had a problem with any of those situations. When I accelerate
for takeoff the airplane initially pithes ever so slightly nose down for
about 1sec and it shows on the D6. When in turbulance the D6 bounces around
just like the airplane. So the D6 is following what the airplane is doing
spot on.
Have you checked with DYNON about this on their forum?
http://dynonavionics.com/cgi-bin/yabb2/YaBB.pl
I know there have been software updates to their equipment over their
lifespan. Maybe they have seen this before and have a solution.
Galin
On Mon, Aug 20, 2012 at 2:12 AM, Scott Stearns <sstearns2@yahoo.com> wrote:
> How does it do when you accelerate down the runway or when you turn while
> taxiing?
> What about in turbulence? My dynon attitude data has problems in all
> these areas.
>
> The rest of the functions work well though.
>
> Scott
>
>
> On Aug 19, 2012, at 12:15 PM, Galin Hernandez <galinhdz@gmail.com> wrote:
>
> Interesting. I fly behind a Dynon D6 as my attitude indicator and it is
> dead on. I did have to rotate it ever so slightly when
> I initially installed it to compensate for mounting errors but otherwise it
> was an easy instal.
>
> Galin
>
> On Sun, Aug 19, 2012 at 10:44 AM, Scott Stearns <sstearns2@yahoo.com>wrote:
>
>> I have the dynon D100 and D180. They work well but the attitude
>> information is not up to aviation standards. Hopefully thier new stuff is
>> better....
>>
>> Scott
>>
>>
>>
>> On Aug 18, 2012, at 9:43 PM, Galin Hernandez <galinhdz@gmail.com> wrote:
>>
>> All;
>>
>> I am finally getting started on my new instrument panel. It will be based
>> around the DYNON Skyview system with 2ea 7" displays. I will post updates
>> as they happen on our web page.
>>
>> http://www.puertoricoflyer.com/glass_panel_instal.html
>>
>> Galin
>>
>> *
>>
>> href="http://www.matronics.com/Navigator?KIS-List">http://www.matronics.com/Navigator?KIS-List
>>
>>
>> href="http://forums.matronics.com">http://forums.matronics.com
>> href="http://www.matronics.com/contribution">http://www.matronics.com/contribution
>> *
>>
>> *
>>
>> et="_blank">http://www.matronics.com/Navigator?KIS-List
>> ttp://forums.matronics.com
>> _blank">http://www.matronics.com/contribution
>> *
>>
>>
> *
>
> href="http://www.matronics.com/Navigator?KIS-List">http://www.matronics.com/Navigator?KIS-List
> href="http://forums.matronics.com">http://forums.matronics.com
> href="http://www.matronics.com/contribution">http://www.matronics.com/contribution
> *
>
> *
>
> *
>
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: New Instrument Panel |
Bob; You didn't build a battery box, you built a complete power station.
Looks good. :o)
On Sun, Aug 19, 2012 at 8:49 PM, Robert Reed <robertr237@att.net> wrote:
> Sounds Great Galin, I look forward to seeing it in a week or so. Got
> some time in on my project this week. Can't believe how long it takes to
> make what seems like a perfectly simple battery box. Constructed a frame
> for mounting dual batteries on either side of the center console under the
> front seats. I decided to put all of the relays (Master, Starter,
> Crossover, Secondary ) in the frame between the batteries. It is a very
> tight space but will keep the leads as short as possible. Hand cutting,
> hand filing, and fabricatioin takes a lot of time but it was a welcome
> break from SANDING!!!!! Fear not though, filled and sanded the bottom of
> the fuselage which is great fun if you like having sand dust dropping into
> your face and mouth. Put in some hard points for support of exhaust
> system, electric fuel pump, and future auto pilot servos. Trying to finish
> everthing I can on the inside before putting the top on permanently.
>
> Bob
> ------------------------------
> *From:* Galin Hernandez <galinhdz@gmail.com>
> *To:* kis-list@matronics.com
> *Sent:* Sat, August 18, 2012 11:43:53 PM
> *Subject:* KIS-List: New Instrument Panel
>
> All;
>
> I am finally getting started on my new instrument panel. It will be based
> around the DYNON Skyview system with 2ea 7" displays. I will post updates
> as they happen on our web page.
>
> http://www.puertoricoflyer.com/glass_panel_instal.html
>
> Galin
>
> **
>
>
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: New Instrument Panel |
Galin, very attractive!!!! Kent
From: Galin Hernandez
Sent: Saturday, August 18, 2012 11:43 PM
Subject: KIS-List: New Instrument Panel
All;
I am finally getting started on my new instrument panel. It will be
based around the DYNON Skyview system with 2ea 7" displays. I will post
updates as they happen on our web page.
http://www.puertoricoflyer.com/glass_panel_instal.html
Galin
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: New Instrument Panel |
Hi Galin,
I have updated the software a couple times and there have been several threa
ds about my issue on the dynon forums.
I dont have the latest update since my laptop to dynon connection stopped wo
rking. I need to get to the bottom of that one.
Glad you G6 is working well.
Scott
On Aug 20, 2012, at 8:01 AM, Galin Hernandez <galinhdz@gmail.com> wrote:
> Scott;
>
> I have never had a problem with any of those situations. When I accelerate
for takeoff the airplane initially pithes ever so slightly nose down for ab
out 1sec and it shows on the D6. When in turbulance the D6 bounces around ju
st like the airplane. So the D6 is following what the airplane is doing spot
on.
>
> Have you checked with DYNON about this on their forum?
>
> http://dynonavionics.com/cgi-bin/yabb2/YaBB.pl
>
> I know there have been software updates to their equipment over their life
span. Maybe they have seen this before and have a solution.
>
> Galin
>
> On Mon, Aug 20, 2012 at 2:12 AM, Scott Stearns <sstearns2@yahoo.com> wrote
:
> How does it do when you accelerate down the runway or when you turn while t
axiing?
> What about in turbulence? My dynon attitude data has problems in all the
se areas.
>
> The rest of the functions work well though.
>
> Scott
>
>
>
>
>
> On Aug 19, 2012, at 12:15 PM, Galin Hernandez <galinhdz@gmail.com> wrote:
>
>> Interesting. I fly behind a Dynon D6 as my attitude indicator and it is d
ead on. I did have to rotate it ever so slightly when I initially installed i
t to compensate for mounting errors but otherwise it was an easy instal.
>>
>> Galin
>>
>> On Sun, Aug 19, 2012 at 10:44 AM, Scott Stearns <sstearns2@yahoo.com> wro
te:
>> I have the dynon D100 and D180. They work well but the attitude informat
ion is not up to aviation standards. Hopefully thier new stuff is better...
.
>>
>> Scott
>>
>>
>>
>> On Aug 18, 2012, at 9:43 PM, Galin Hernandez <galinhdz@gmail.com> wrote:
>>
>>> All;
>>>
>>> I am finally getting started on my new instrument panel. It will be base
d around the DYNON Skyview system with 2ea 7" displays. I will post updates a
s they happen on our web page.
>>>
>>> http://www.puertoricoflyer.com/glass_panel_instal.html
>>>
>>> Galin
>>>
>>>
>>> href="http://www.matronics.com/Navigator?KIS-List">http://www.matronic
s.com/Navigator?KIS-List
>>>
>>>
>>>
>>> href="http://forums.matronics.com">http://forums.matronics.com
>>> href="http://www.matronics.com/contribution">http://www.matronics.com/
contribution
>>>
>>
>>
>> et="_blank">http://www.matronics.com/Navigator?KIS-List
>> ttp://forums.matronics.com
>> _blank">http://www.matronics.com/contribution
>>
>>
>>
>>
>> href="http://www.matronics.com/Navigator?KIS-List">http://www.matronics
.com/Navigator?KIS-List
>> href="http://forums.matronics.com">http://forums.matronics.com
>> href="http://www.matronics.com/contribution">http://www.matronics.com/c
ontribution
>>
>
>
> et="_blank">http://www.matronics.com/Navigator?KIS-List
> tp://forums.matronics.com
> _blank">http://www.matronics.com/contribution
>
>
>
>
==========================
=========
==========================
=========
==========================
=========
==========================
=========
>
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: New Instrument Panel |
Wellllllll, it started out as just a simple battery box but-it-kinda mo
rphed =0Ainto something more.- I liked the idea of keeping all the primar
y power leads =0Ashort and in one area inside and-out of the elements.-
As I started assembling =0Ait just seemed a natural to use that extra spac
e for something useful and =0Aeverything just seemed to fit.- Now to star
t adding all the wiring.- =0A=0A=0A=0ABob=0A=0A=0A=0A=0A_________________
_______________=0AFrom: Galin Hernandez <galinhdz@gmail.com>=0ATo: kis-list
@matronics.com=0ASent: Mon, August 20, 2012 10:04:12 AM=0ASubject: Re: KIS-
List: New Instrument Panel=0A=0ABob;-You didn't build-a battery box, yo
u built a complete-power station. Looks =0Agood. :o)=0A=0A=0AOn Sun, Aug
19, 2012 at 8:49 PM, Robert Reed <robertr237@att.net> wrote:=0A=0ASounds Gr
eat Galin, I look forward to seeing it in a week or so.- Got some time
=0Ain on my project this week.- Can't believe how long it takes to make w
hat seems =0Alike a perfectly simple battery box.- Constructed a frame fo
r mounting dual =0Abatteries on either side of the center console under the
front seats.- I decided =0Ato put all of the relays (Master, Starter, Cr
ossover, Secondary ) in the frame =0Abetween the batteries.- It is a very
tight space but will keep the leads as =0Ashort as possible.- Hand cutti
ng, hand filing, and fabricatioin takes a lot of =0Atime but it was a welco
me break from SANDING!!!!!- Fear not though, filled and =0Asanded the bot
tom of the fuselage which is great fun if you like having sand =0Adust drop
ping into your face and mouth.- Put in some hard points for support of
=0Aexhaust system, electric fuel pump, and future auto pilot servos.- Try
ing to =0Afinish everthing I can on the inside before putting the top on pe
rmanently.=0A>=0A>=0A>Bob=0A>=0A>=0A________________________________=0AFrom
: Galin Hernandez <galinhdz@gmail.com>=0A>To: kis-list@matronics.com=0A>Sen
t: Sat, August 18, 2012 11:43:53 PM=0A>Subject: KIS-List: New Instrument Pa
nel=0A>=0A>=0A>=0A>All;=0A>=0A>I am finally getting started on my new instr
ument panel. It will be based around =0A>the DYNON Skyview system with 2ea
7" displays. I will post updates as they =0A>happen on our web page.=0A>=0A
>http://www.puertoricoflyer.com/glass_panel_instal.html=0A>=0A>Galin=0A=0A
========== =0A
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: New Instrument Panel |
Scott:
Have you always had this problem or did it start after it had been working
a while? The DYNON Forum just published a procedure (April 2012) to avoid
an issue similar to what you describe.
http://www.dynonavionics.com/downloads/Install_Guides/Dynon_Pitot_Static_Test_White_Paper-Rev_B.pdf
I don't know if this applies in your situation but you might look into it.
Galin
On Mon, Aug 20, 2012 at 11:39 AM, Scott Stearns <sstearns2@yahoo.com> wrote:
> Hi Galin,
>
> I have updated the software a couple times and there have been several
> threads about my issue on the dynon forums.
>
> I dont have the latest update since my laptop to dynon connection stopped
> working. I need to get to the bottom of that one.
>
> Glad you G6 is working well.
>
> Scott
>
>
> On Aug 20, 2012, at 8:01 AM, Galin Hernandez <galinhdz@gmail.com> wrote:
>
> Scott;
>
> I have never had a problem with any of those situations. When I accelerate
> for takeoff the airplane initially pithes ever so slightly nose down for
> about 1sec and it shows on the D6. When in turbulance the D6 bounces around
> just like the airplane. So the D6 is following what the airplane is doing
> spot on.
>
> Have you checked with DYNON about this on their forum?
>
> http://dynonavionics.com/cgi-bin/yabb2/YaBB.pl
>
> I know there have been software updates to their equipment over their
> lifespan. Maybe they have seen this before and have a solution.
>
> Galin
>
> On Mon, Aug 20, 2012 at 2:12 AM, Scott Stearns <sstearns2@yahoo.com>wrote:
>
>> How does it do when you accelerate down the runway or when you turn while
>> taxiing?
>> What about in turbulence? My dynon attitude data has problems in all
>> these areas.
>>
>> The rest of the functions work well though.
>>
>> Scott
>>
>>
>>
>>
>>
>> On Aug 19, 2012, at 12:15 PM, Galin Hernandez <galinhdz@gmail.com> wrote:
>>
>> Interesting. I fly behind a Dynon D6 as my attitude indicator and it is
>> dead on. I did have to rotate it ever so slightly when
>> I initially installed it to compensate for mounting errors but otherwise it
>> was an easy instal.
>>
>> Galin
>>
>> On Sun, Aug 19, 2012 at 10:44 AM, Scott Stearns <sstearns2@yahoo.com>wrote:
>>
>>> I have the dynon D100 and D180. They work well but the attitude
>>> information is not up to aviation standards. Hopefully thier new stuff is
>>> better....
>>>
>>> Scott
>>>
>>>
>>>
>>> On Aug 18, 2012, at 9:43 PM, Galin Hernandez <galinhdz@gmail.com> wrote:
>>>
>>> All;
>>>
>>> I am finally getting started on my new instrument panel. It will be
>>> based around the DYNON Skyview system with 2ea 7" displays. I will post
>>> updates as they happen on our web page.
>>>
>>> http://www.puertoricoflyer.com/glass_panel_instal.html
>>>
>>> Galin
>>>
>>> *
>>>
>>>
>>> href="http://www.matronics.com/Navigator?KIS-List">http://www.matronics.com/Navigator?KIS-List
>>>
>>>
>>>
>>> href="http://forums.matronics.com">http://forums.matronics.com
>>>
>>> href="http://www.matronics.com/contribution">http://www.matronics.com/contribution
>>> *
>>>
>>> *
>>>
>>> et="_blank">http://www.matronics.com/Navigator?KIS-List
>>> ttp://forums.matronics.com
>>> _blank">http://www.matronics.com/contribution
>>> *
>>>
>>>
>> *
>>
>> href="http://www.matronics.com/Navigator?KIS-List">http://www.matronics.com/Navigator?KIS-List
>>
>>
>> href="http://forums.matronics.com">http://forums.matronics.com
>>
>> href="http://www.matronics.com/contribution">http://www.matronics.com/contribution
>> *
>>
>> *
>>
>> et="_blank">http://www.matronics.com/Navigator?KIS-List
>> tp://forums.matronics.com
>> _blank">http://www.matronics.com/contribution
>> *
>>
>>
> *
>
>
> href="http://www.matronics.com/Navigator?KIS-List">http://www.matronics.com/Navigator?KIS-List
> href="http://forums.matronics.com">http://forums.matronics.com
>
> href="http://www.matronics.com/contribution">http://www.matronics.com/contribution
> *
>
> *
>
> *
>
>
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: New Instrument Panel |
Galin...=0A-=0AIt has always been this way but I did a pitot static check
before I flew so that may be the issue.- The white paper says that is sh
ow a turn rate when the airplane is not moving if that is the problem so I
will check.=0A-=0AThanks,=0AScott=0A =0A=0A______________________________
__=0A From: Galin Hernandez <galinhdz@gmail.com>=0ATo: kis-list@matronics.c
om =0ASent: Monday, August 20, 2012 11:41 AM=0ASubject: Re: KIS-List: New I
nstrument Panel=0A =0A=0AScott:=0A=0AHave you always had this problem or d
id it start after it had been working a while? The DYNON Forum just publish
ed a procedure (April 2012)-to avoid an issue similar to what you describ
e. =0A=0Ahttp://www.dynonavionics.com/downloads/Install_Guides/Dynon_Pitot_
Static_Test_White_Paper-Rev_B.pdf =0A=0AI don't know if this applies in you
r situation but you might look into it.=0A=0AGalin=0A=0A=0AOn Mon, Aug 20,
2012 at 11:39 AM, Scott Stearns <sstearns2@yahoo.com> wrote:=0A=0AHi Galin,
=0A>=0A> =0A>I have updated the software a couple times and there have been
several threads about my issue on the dynon forums.=0A>=0A>=0A>I dont have
the latest update since my laptop to dynon connection stopped working. -
I need to get to the bottom of that one. =0A>=0A>=0A>Glad you G6 is working
well.=0A>=0A>=0A>Scott=0A>=0A>=0A>=0A>=0A>On Aug 20, 2012, at 8:01 AM, Gal
in Hernandez <galinhdz@gmail.com> wrote:=0A>=0A>=0A>Scott;=0A>>=0A>>I have
never had a problem with any of those situations. When I accelerate for tak
eoff the airplane initially pithes ever so slightly nose down for about 1se
c and it shows on the D6. When in turbulance the D6 bounces around just lik
e the airplane.-So the D6 is following what the airplane is doing spot on
. =0A>>=0A>>Have you checked with DYNON about this on their forum?=0A>>=0A>
>http://dynonavionics.com/cgi-bin/yabb2/YaBB.pl =0A>>=0A>>I know there have
been software updates to their equipment over their lifespan. Maybe they h
ave seen this before and have a solution.=0A>>=0A>>Galin=0A>>=0A>>=0A>>On M
on, Aug 20, 2012 at 2:12 AM, Scott Stearns <sstearns2@yahoo.com> wrote:=0A>
>=0A>>How does it do when you accelerate down the runway or when you turn w
hile taxiing? - =0A>>>What about in turbulence? - My dynon attitude dat
a has problems in all these areas. -=0A>>>=0A>>>=0A>>>The rest of the fun
ctions work well though.=0A>>>=0A>>>=0A>>>=0A>>>Scott=0A>>>=0A>>>=0A>>>=0A>
>>=0A>>>=0A>>>=0A>>>=0A>>>On Aug 19, 2012, at 12:15 PM, Galin Hernandez <ga
linhdz@gmail.com> wrote:=0A>>>=0A>>>=0A>>>Interesting. I fly behind a Dynon
D6 as my attitude indicator and it is dead on. I did have to-rotate it e
ver so slightly when I-initially-installed it to compensate for mountin
g errors but otherwise it was an easy instal.- =0A>>>>=0A>>>>Galin=0A>>>>
=0A>>>> =0A>>>>On Sun, Aug 19, 2012 at 10:44 AM, Scott Stearns <sstearns2@y
ahoo.com> wrote:=0A>>>>=0A>>>>I have the dynon D100 and D180. -They work
well but the attitude information is not up to aviation standards. -Hopef
ully thier new stuff is better.... =0A>>>>>=0A>>>>> =0A>>>>>Scott=0A>>>>>
=0A>>>>>=0A>>>>> =0A>>>>>=0A>>>>>On Aug 18, 2012, at 9:43 PM, Galin Hernand
ez <galinhdz@gmail.com> wrote:=0A>>>>>=0A>>>>> =0A>>>>>All; =0A>>>>>>=0A>>
>>>>I am finally getting started on my new instrument panel. It will be bas
ed around the DYNON Skyview system with 2ea 7" displays. I will post update
s as they happen on our web page. =0A>>>>>>=0A>>>>>>http://www.puertoricofl
yer.com/glass_panel_instal.html =0A>>>>>>=0A>>>>>>Galin=0A>>>>>>href="htt
p://www.matronics.com/Navigator?KIS-List">http://www.matronics.com/Navigato
r?KIS-List =0A>>>>>>href="http://forums.matronics.com/">http://forums.mat
ronics.com/=0A>>>>>>href="http://www.matronics.com/contribution">http://w
ww.matronics.com/contribution =0A>>>>>et="_blank">http://www.matronics.co
m/Navigator?KIS-List ttp://forums.matronics.com _blank">http://www.matronic
s.com/contribution =0A>>>>=0A>>>>=0A>>>>href="http://www.matronics.com/Na
vigator?KIS-List">http://www.matronics.com/Navigator?KIS-List=0A>>>>href=
"http://forums.matronics.com/">http://forums.matronics.com/=0A>>>>href="h
ttp://www.matronics.com/contribution">http://www.matronics.com/contribution
=0A>>>et="_blank">http://www.matronics.com/Navigator?KIS-List tp://forum
s.matronics.com _blank">http://www.matronics.com/contribution =0A>>=0A>>hre
f="http://www.matronics.com/Navigator?KIS-List">http://www.matronics.com/
Navigator?KIS-List href="http://forums.matronics.com/">http://forums.matr
onics.com/=0Ahref="http://www.matronics.com/contribution">http://www.matr
onics.com/contribution =0A>et="_blank">http://www.matronics.com/Navigator
?KIS-List=0Atp://forums.matronics.com=0A_blank">http://www.matronics.com/co
=================
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: New Instrument Panel |
Man I hope this is the issue and you get it working. GOOD LUCK! :o)
Galin
On Mon, Aug 20, 2012 at 4:13 PM, Scott Stearns <sstearns2@yahoo.com> wrote:
> Galin...
>
> It has always been this way but I did a pitot static check before I flew
> so that may be the issue. The white paper says that is show a turn rate
> when the airplane is not moving if that is the problem so I will check.
>
> Thanks,
> Scott
>
> *From:* Galin Hernandez <galinhdz@gmail.com>
> *To:* kis-list@matronics.com
> *Sent:* Monday, August 20, 2012 11:41 AM
>
> *Subject:* Re: KIS-List: New Instrument Panel
>
> Scott:
>
> Have you always had this problem or did it start after it had been working
> a while? The DYNON Forum just published a procedure (April 2012) to avoid
> an issue similar to what you describe.
>
>
> http://www.dynonavionics.com/downloads/Install_Guides/Dynon_Pitot_Static_Test_White_Paper-Rev_B.pdf
>
> I don't know if this applies in your situation but you might look into it.
>
> Galin
>
> On Mon, Aug 20, 2012 at 11:39 AM, Scott Stearns <sstearns2@yahoo.com>wrote:
>
> Hi Galin,
>
> I have updated the software a couple times and there have been several
> threads about my issue on the dynon forums.
>
> I dont have the latest update since my laptop to dynon connection stopped
> working. I need to get to the bottom of that one.
>
> Glad you G6 is working well.
>
> Scott
>
>
> On Aug 20, 2012, at 8:01 AM, Galin Hernandez <galinhdz@gmail.com> wrote:
>
> Scott;
>
> I have never had a problem with any of those situations. When I accelerate
> for takeoff the airplane initially pithes ever so slightly nose down for
> about 1sec and it shows on the D6. When in turbulance the D6 bounces around
> just like the airplane. So the D6 is following what the airplane is doing
> spot on.
>
> Have you checked with DYNON about this on their forum?
>
> http://dynonavionics.com/cgi-bin/yabb2/YaBB.pl
>
> I know there have been software updates to their equipment over their
> lifespan. Maybe they have seen this before and have a solution.
>
> Galin
>
> On Mon, Aug 20, 2012 at 2:12 AM, Scott Stearns <sstearns2@yahoo.com>wrote:
>
> How does it do when you accelerate down the runway or when you turn while
> taxiing?
> What about in turbulence? My dynon attitude data has problems in all
> these areas.
>
> The rest of the functions work well though.
>
> Scott
>
>
> On Aug 19, 2012, at 12:15 PM, Galin Hernandez <galinhdz@gmail.com> wrote:
>
> Interesting. I fly behind a Dynon D6 as my attitude indicator and it is
> dead on. I did have to rotate it ever so slightly when
> I initially installed it to compensate for mounting errors but otherwise it
> was an easy instal.
>
> Galin
>
> On Sun, Aug 19, 2012 at 10:44 AM, Scott Stearns <sstearns2@yahoo.com>wrote:
>
> I have the dynon D100 and D180. They work well but the attitude
> information is not up to aviation standards. Hopefully thier new stuff is
> better....
>
> Scott
>
>
> On Aug 18, 2012, at 9:43 PM, Galin Hernandez <galinhdz@gmail.com> wrote:
>
> All;
>
> I am finally getting started on my new instrument panel. It will be based
> around the DYNON Skyview system with 2ea 7" displays. I will post updates
> as they happen on our web page.
>
> http://www.puertoricoflyer.com/glass_panel_instal.html
>
> Galin
>
> *
>
>
> href="http://www.matronics.com/Navigator?KIS-List">http://www.matronics.com/Navigator?KIS-List
>
>
> href="http://forums.matronics.com/">http://forums.matronics.com/
>
> href="http://www.matronics.com/contribution">http://www.matronics.com/contribution
> *
>
> *
>
> et="_blank">http://www.matronics.com/Navigator?KIS-List
> ttp://forums.matronics.com
> _blank">http://www.matronics.com/contribution
> *
>
>
> *
>
>
> href="http://www.matronics.com/Navigator?KIS-List">http://www.matronics.com/Navigator?KIS-List
>
>
> href="http://forums.matronics.com/">http://forums.matronics.com/
>
> href="http://www.matronics.com/contribution">http://www.matronics.com/contribution
> *
>
> *
>
> et="_blank">http://www.matronics.com/Navigator?KIS-List
> tp://forums.matronics.com
> _blank">http://www.matronics.com/contribution
> *
>
>
> *
>
>
> href="http://www.matronics.com/Navigator?KIS-List">http://www.matronics.com/Navigator?KIS-List
>
>
> href="http://forums.matronics.com/">http://forums.matronics.com/
>
> href="http://www.matronics.com/contribution">http://www.matronics.com/contribution
> *
>
> *
>
> et="_blank">http://www.matronics.com/Navigator?KIS-List
> tp://forums.matronics.com
> _blank">http://www.matronics.com/contribution
> *
>
>
> *http://www.matronics.com/Navigator?KIS-Li="http://www.matronics.com/contribution" rel="nofollow" target="_blan=
> *
>
>
> *
>
> *
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|