Today's Message Index:
----------------------
1. 07:10 AM - New Instruement Panel - 2nd cut (Galin Hernandez)
2. 11:11 AM - Re: New Instruement Panel - 2nd cut (Scott Stearns)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | New Instruement Panel - 2nd cut |
After doing an actual fit in the airplane with the 1st panel we cut, we
made small adjustments to the position of the main instruments. Then we
decided where to place the rest of the "stuff" that goes in an instrument
panel. It took us about 2hrs to program the design before we could send it
to the milling machine. After about 30 minutes the CNC machine cut the
design on a piece of plexiglass. Now I will take the plexiglass panel, sit
in the airplane and see how the placement works. Hopefully the placement
will be close enough that we can cut the actual panel soon. I made a video
of this end cut and posted it at:
http://youtu.be/lMZ_IlW6Lck
Galin
N819PR
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: New Instruement Panel - 2nd cut |
Cool!- You might want to have them engrave the text onto the panel too.
- Then you can fill the text with paint and sand the panel to a brush loo
k and the text looks great.- =0A-=0AScott=0A =0A=0A____________________
____________=0A From: Galin Hernandez <galinhdz@gmail.com>=0ATo: kis-list@m
atronics.com =0ASent: Sunday, August 26, 2012 7:09 AM=0ASubject: KIS-List:
New Instruement Panel - 2nd cut=0A =0A=0AAfter doing an actual fit in the
airplane with the 1st panel we cut, we made small adjustments to the positi
on of the-main instruments. Then we decided where to place the rest of th
e "stuff" that goes in an instrument panel. It took us about 2hrs to-prog
ram the design before we could send it to the milling machine. After about
30 minutes the CNC machine cut the design on a piece of plexiglass. Now I w
ill take the plexiglass panel, sit in the airplane and see how the placemen
t works. Hopefully the placement will be close enough that we can cut the a
ctual panel soon. I-made a video of this end cut and posted it at: =0A=0A
====
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|