---------------------------------------------------------- KIS-List Digest Archive --- Total Messages Posted Sun 08/26/12: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:10 AM - New Instruement Panel - 2nd cut (Galin Hernandez) 2. 11:11 AM - Re: New Instruement Panel - 2nd cut (Scott Stearns) ________________________________ Message 1 _____________________________________ Time: 07:10:24 AM PST US From: Galin Hernandez Subject: KIS-List: New Instruement Panel - 2nd cut After doing an actual fit in the airplane with the 1st panel we cut, we made small adjustments to the position of the main instruments. Then we decided where to place the rest of the "stuff" that goes in an instrument panel. It took us about 2hrs to program the design before we could send it to the milling machine. After about 30 minutes the CNC machine cut the design on a piece of plexiglass. Now I will take the plexiglass panel, sit in the airplane and see how the placement works. Hopefully the placement will be close enough that we can cut the actual panel soon. I made a video of this end cut and posted it at: http://youtu.be/lMZ_IlW6Lck Galin N819PR ________________________________ Message 2 _____________________________________ Time: 11:11:27 AM PST US From: Scott Stearns Subject: Re: KIS-List: New Instruement Panel - 2nd cut Cool!- You might want to have them engrave the text onto the panel too. - Then you can fill the text with paint and sand the panel to a brush loo k and the text looks great.- =0A-=0AScott=0A =0A=0A____________________ ____________=0A From: Galin Hernandez =0ATo: kis-list@m atronics.com =0ASent: Sunday, August 26, 2012 7:09 AM=0ASubject: KIS-List: New Instruement Panel - 2nd cut=0A =0A=0AAfter doing an actual fit in the airplane with the 1st panel we cut, we made small adjustments to the positi on of the-main instruments. Then we decided where to place the rest of th e "stuff" that goes in an instrument panel. It took us about 2hrs to-prog ram the design before we could send it to the milling machine. After about 30 minutes the CNC machine cut the design on a piece of plexiglass. Now I w ill take the plexiglass panel, sit in the airplane and see how the placemen t works. Hopefully the placement will be close enough that we can cut the a ctual panel soon. I-made a video of this end cut and posted it at: =0A=0A ==== ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kis-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/KIS-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kis-list Browse Digests http://www.matronics.com/digest/kis-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.