Today's Message Index:
----------------------
1. 05:59 AM - Excess Carbon Fiber (Galin Hernandez)
2. 09:56 AM - Re: Nose wheel assembly damage. (Mike Pienaar)
3. 10:08 AM - Re: Excess Carbon Fiber (ALFRED ROSA)
4. 10:12 AM - Re: Excess Carbon Fiber (John Forster)
5. 11:01 AM - Re: Excess Carbon Fiber (Scott Stearns)
6. 12:29 PM - Re: Excess Carbon Fiber (Flyinisfun@aol.com)
7. 12:39 PM - Re: Excess Carbon Fiber (Peter Duran)
8. 12:44 PM - Re: Excess Carbon Fiber (Scott Stearns)
9. 06:15 PM - Re: Nose wheel assembly damage. (Galin Hernandez)
10. 06:32 PM - Re: Excess Carbon Fiber (Robert Reed)
11. 08:16 PM - Re: Excess Carbon Fiber---there is no such think as excess carbon fiber! (Mark Kettering)
12. 11:03 PM - Re: Excess Carbon Fiber---there is no such think as excess carbon fiber! (randy.ott@gmail.com)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Excess Carbon Fiber |
The person who has the hangar next to mine has offered me a lot of carbon
fiber he is going to throw away. They are about 4ft wide by 20ft long
rolls. It looks like he has about 8-10 rolls.
I hate to see all this material get thrown away but it is much more than I
can ever use. If you want some, let me know and we can arrange the shipping.
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Nose wheel assembly damage. |
Galin,
I have the steerable gear and may want to change to the castoring gear
in the future.
If it is not too much trouble could you please measure the gear and put
the dimension and more foto's and deatails on Bob's site as I only see
the steerable version in the manual.
Thanks
MIke
----- Original Message -----
From: Galin Hernandez
To: kis-list@matronics.com
Sent: Friday, April 05, 2013 4:20 PM
Subject: Re: KIS-List: Nose wheel assembly damage.
As far as we can tell there was no damage whatsoever to the gear tube.
I got a reply from Matronics saying the picture can't be forwarded so
here is another smaller version of the same picture just in case.
Here is the picture of the disassembled nose gear assembly with a new
shock absorber next to it. An extension is added to the top part of the
shock
absorber with two suspension coils that are also part of the assembly
as spacers. You can see the top part of the stock shock that must be cut
off in order for it to fit inside the assembly.
On Fri, Apr 5, 2013 at 5:04 PM, Robert Reed <robertr237@att.net>
wrote:
Looks like it is essentially a shock dampened coil spring assembly.
The top part that you have to cut away is essentially the dust cover
that was replaced by the outside of the nose gear tube. Interesting bit
of Aggie Engineering. (Inside joke on Texas A & M)
The replacement looks like the right one. Can you tell if the
exhaust heat did any damage to the gear tube?
Bob
-------------------------------------------------------------------------
---
From: Galin Hernandez <galinhdz@gmail.com>
To: "kis-list@matronics.com" <kis-list@matronics.com>
Sent: Fri, April 5, 2013 4:41:31 PM
Subject: Re: KIS-List: Nose wheel assembly damage.
Here is a picture of the disassembled nose gear assembly with a new
shock absorber next to it. An extension is added to the top part of the
shock absorber with two suspension coils that are also part of the
assembly as spacers. You can see the top part of the stock shock that
must be cut off in order for it to fit inside the assembly.
On Fri, Apr 5, 2013 at 2:36 PM, Randy Ott <randy.ott@gmail.com>
wrote:
D
Sent from my iPhone
On Apr 4, 2013, at 4:43 PM, Galin Hernandez <galinhdz@gmail.com>
wrote:
Using OC's information about the shock absorber being from a
Ford Falcon, a very tenacious O'Reilley's auto parts employee found it.
It is a Monroe-matic Plus 31069 shock absorber. You will have to cut the
top cover off in order make it fit inside the assembly but otherwise it
is a perfect fit.
http://www.oreillyauto.com/site/c/detail/MON6/31069.oap?year=1967&make=
Ford&model=Mustang&vi=1332302&ck=Search_C0077_MON_1332302_-1&mn=M
onroe&mc=MON&pt=C0077&ppt=C0035
Keep this information handy in case you need a replacement. :0)
On Thu, Apr 4, 2013 at 8:04 AM, ALFRED ROSA
<fredorosa@gmail.com> wrote:
Galin,
How did you like the performance of the shock you had? Could
it have been softer or harder?
Now's your chance to adjust to your liking.
Al
On Thu, Apr 4, 2013 at 7:38 AM, Owen Baker <bakerocb@cox.net>
wrote:
4/4/2013
Hello Galin, Rich wrote that the shock absorber for the KIS
Cruiser nose gear came from a Ford Falcon. That should narrow your
search down a bit.
OC
====================
Yes there is a part number (733699) but nobody can seem to
cross reference the part number on the shock. They want a make model
year of a car in order to find it. What shock are you using in your
nose-wheel?
et="_blank">http://www.matronics.com/Navigator?KIS-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution
et="_blank">http://www.matronics.com/Navigator?KIS-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D
et="_blank">http://www.matronics.com/Navigator?KIS-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Excess Carbon Fiber |
I'll take a roll. Send it to :
Al Rosa
1115 Manasota Beach Rd.
Englewood, FL 34223
Let me know what I owe you.
Al
On Sat, Apr 6, 2013 at 8:58 AM, Galin Hernandez <galinhdz@gmail.com> wrote:
> The person who has the hangar next to mine has offered me a lot of carbon
> fiber he is going to throw away. They are about 4ft wide by 20ft long
> rolls. It looks like he has about 8-10 rolls.
>
> I hate to see all this material get thrown away but it is much more than I
> can ever use. If you want some, let me know and we can arrange the shipping.
>
> *
>
> *
>
>
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Excess Carbon Fiber |
I would be interested in a roll. We can talk about shipping once you take p
ossession of the goods.
John Forster
On Apr 6, 2013, at 7:59 AM, "Galin Hernandez" <galinhdz@gmail.com<mailto:ga
linhdz@gmail.com>> wrote:
The person who has the hangar next to mine has offered me a lot of carbon f
iber he is going to throw away. They are about 4ft wide by 20ft long rolls.
It looks like he has about 8-10 rolls.
I hate to see all this material get thrown away but it is much more than I
can ever use. If you want some, let me know and we can arrange the shipping
.
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Excess Carbon Fiber |
I would love a roll or however many rolls are unclaimed.
Scott Stearns
343 Paseo Sabanero
Camarillo, CA 93012
Let me know what I owe you.
Cheers,
Scott
On Apr 6, 2013, at 5:58 AM, Galin Hernandez <galinhdz@gmail.com> wrote:
> The person who has the hangar next to mine has offered me a lot of carbon f
iber he is going to throw away. They are about 4ft wide by 20ft long rolls. I
t looks like he has about 8-10 rolls.
>
> I hate to see all this material get thrown away but it is much more than I
can ever use. If you want some, let me know and we can arrange the shipping
.
>
>
==========================
=========
==========================
=========
==========================
=========
==========================
=========
>
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Excess Carbon Fiber |
Scott,
I would love to have a roll of it. I could arrange for my daughter who
lives in Costa Mesa to pick it up.
Thanks,
Jesse Wright 720 434 3987
In a message dated 4/6/2013 12:23:28 P.M. Mountain Daylight Time,
sstearns2@yahoo.com writes:
I would love a roll or however many rolls are unclaimed.
Scott Stearns
343 Paseo Sabanero
Camarillo, CA 93012
Let me know what I owe you.
Cheers,
Scott
On Apr 6, 2013, at 5:58 AM, Galin Hernandez <_galinhdz@gmail.com_
(mailto:galinhdz@gmail.com) > wrote:
The person who has the hangar next to mine has offered me a lot of carbon
fiber he is going to throw away. They are about 4ft wide by 20ft long
rolls. It looks like he has about 8-10 rolls.
I hate to see all this material get thrown away but it is much more than I
can ever use. If you want some, let me know and we can arrange the
shipping.
D=========
(mip://0702ca28/3D"http://www.matronics.com/Navigator?KIS-List")
D=========
(mip://0702ca28/3D"http://forums.matronics.com")
D=========
(mip://0702ca28/3D"http://www.matronics.com/contribution")
D=========
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Excess Carbon Fiber |
I'll like to have a roll, many thanks.
Peter Duran
1245 N 86th Place
Mesa, AZ 85207
KIS TR1 N358JC
Please let me know how I can pay the shipping. Thanks.
On Sat, Apr 6, 2013 at 12:29 PM, <Flyinisfun@aol.com> wrote:
> **
> Scott,
> I would love to have a roll of it. I could arrange for my daughter who
> lives in Costa Mesa to pick it up.
> Thanks,
> Jesse Wright 720 434 3987
>
>
> In a message dated 4/6/2013 12:23:28 P.M. Mountain Daylight Time,
> sstearns2@yahoo.com writes:
>
> I would love a roll or however many rolls are unclaimed.
>
> Scott Stearns
> 343 Paseo Sabanero
> Camarillo, CA 93012
>
> Let me know what I owe you.
>
> Cheers,
> Scott
>
>
> On Apr 6, 2013, at 5:58 AM, Galin Hernandez <galinhdz@gmail.com> wrote:
>
> The person who has the hangar next to mine has offered me a lot of
> carbon fiber he is going to throw away. They are about 4ft wide by 20ft
> long rolls. It looks like he has about 8-10 rolls.
>
> I hate to see all this material get thrown away but it is much more than I
> can ever use. If you want some, let me know and we can arrange the shipping.
>
> *
>
> *
>
> *
>
> 3D============================================
> IS-List"' href='mip://0702ca28/3D"http://www.matronics.com/Navigator?KIS-List"'>http://www.matronics.com/Navigator?KIS-List
> 3D============================================
> ='mip://0702ca28/3D"http://forums.matronics.com"'>http://forums.matronics.com
> 3D============================================
> n"' href='mip://0702ca28/3D"http://www.matronics.com/contribution"'>http://www.matronics.com/contribution
> 3D============================================
> *
>
> *
>
> *
>
>
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Excess Carbon Fiber |
Hi Jesse,
It is Galin that has the carbon. I believe it is in texas.
Scott
On Apr 6, 2013, at 12:29 PM, Flyinisfun@aol.com wrote:
> Scott,
> I would love to have a roll of it. I could arrange for my daughter who li
ves in Costa Mesa to pick it up.
> Thanks,
> Jesse Wright 720 434 3987
>
>
> In a message dated 4/6/2013 12:23:28 P.M. Mountain Daylight Time, sstearns
2@yahoo.com writes:
> I would love a roll or however many rolls are unclaimed.
>
> Scott Stearns
> 343 Paseo Sabanero
> Camarillo, CA 93012
>
> Let me know what I owe you.
>
> Cheers,
> Scott
>
>
>
> On Apr 6, 2013, at 5:58 AM, Galin Hernandez <galinhdz@gmail.com> wrote:
>
>> The person who has the hangar next to mine has offered me a lot of carbon
fiber he is going to throw away. They are about 4ft wide by 20ft long rolls
. It looks like he has about 8-10 rolls.
>>
>> I hate to see all this material get thrown away but it is much more than I
can ever use. If you want some, let me know and we can arrange the shipping
.
>>
>>
>>
>
>
> 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> IS-List"' href='mip://0702ca28/3D"http://www.matronics.com/Navigator?KIS
-List"'>http://www.matronics.com/Navigator?KIS-List
> 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> ='mip://0702ca28/3D"http://forums.matronics.com"'>http://forums.matronic
s.com
> 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> n"' href='mip://0702ca28/3D"http://www.matronics.com/contribution"'>http
://www.matronics.com/contribution
> 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
>
>
>
==========================
=========
==========================
=========
==========================
=========
==========================
=========
>
Message 9
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Nose wheel assembly damage. |
Mike, what do you mean measure the gear? I have a castoring nosewheel
supplement to the manual if you want a copy.
On Saturday, April 6, 2013, Mike Pienaar wrote:
> **
> Galin,
>
> I have the steerable gear and may want to change to the castoring gear in
> the future.
>
> If it is not too much trouble could you please measure the gear and put
> the dimension and more foto's and deatails on Bob's site as I only see the
> steerable version in the manual.
>
> Thanks
>
> MIke
>
> ----- Original Message -----
> *From:* Galin Hernandez
> *To:* kis-list@matronics.com
> *Sent:* Friday, April 05, 2013 4:20 PM
> *Subject:* Re: KIS-List: Nose wheel assembly damage.
>
> As far as we can tell there was no damage whatsoever to the gear tube.
>
> I got a reply from Matronics saying the picture can't be forwarded so here
> is another smaller version of the same picture just in case.
>
> Here is the picture of the disassembled nose gear assembly with a new
> shock absorber next to it. An extension is added to the top part of the
> shock
> absorber with two suspension coils that are also part of the assembly as spacers.
> You can see the top part of the stock shock that must be cut off in order
> for it to fit inside the assembly.
>
>
> On Fri, Apr 5, 2013 at 5:04 PM, Robert Reed <robertr237@att.net> wrote:
>
> Looks like it is essentially a shock dampened coil spring assembly. The
> top part that you have to cut away is essentially the dust cover that was
> replaced by the outside of the nose gear tube. Interesting bit of Aggie
> Engineering. (Inside joke on Texas A & M)
>
> The replacement looks like the right one. Can you tell if the exhaust
> heat did any damage to the gear tube?
>
> Bob
>
> ------------------------------
> *From:* Galin Hernandez <galinhdz@gmail.com>
> *To:* "kis-list@matronics.com" <kis-list@matronics.com>
> *Sent:* Fri, April 5, 2013 4:41:31 PM
>
> *Subject:* Re: KIS-List: Nose wheel assembly damage.
>
> Here is a picture of the disassembled nose gear assembly with a new shock
> absorber next to it. An extension is added to the top part of the shock
> absorber with two suspension coils that are also part of the assembly as
> spacers. You can see the top part of the stock shock that must be cut
> off in order for it to fit inside the assembly.
>
>
> On Fri, Apr 5, 2013 at 2:36 PM, Randy Ott <randy.ott@gmail.com> wrote:
>
> D
>
> Sent from my iPhone
>
> On Apr 4, 2013, at 4:43 PM, Galin Hernandez <galinhdz@gmail.com> wrote:
>
> Using OC's information about the shock absorber being from a Ford
> Falcon, a very tenacious O'Reilley's auto parts emp
>
> *
>
> *
>
>
Message 10
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Excess Carbon Fiber |
Galin,=0A=0AI would really appreciate a roll if they haven't all been claim
ed already.- I =0Acould actually have used it today but know that I will
find a lot of additional =0Ause.=0A=0ABob=0A=0A=0A=0A=0A___________________
_____________=0AFrom: Galin Hernandez <galinhdz@gmail.com>=0ATo: "kis-list@
matronics.com" <kis-list@matronics.com>=0ASent: Sat, April 6, 2013 7:59:16
AM=0ASubject: KIS-List: Excess Carbon Fiber=0A=0A=0AThe person who has the
hangar next to mine has offered me a lot of carbon fiber =0Ahe is going to
throw away. They are about 4ft wide by 20ft long rolls. It looks =0Alike he
has about 8-10 rolls. =0A=0A=0AI hate to see all this material get thrown
away but it is much more than I can =0Aever use. If you want some, let me k
========================
=0A
Message 11
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Excess Carbon Fiber---there is no such think as excess |
carbon fiber!
Hello Galin,
Like everyone else I would love a roll or more and am more than happy to pay for
shipping!
Thanks,
Mark Kettering
2796 SE Monroe ST
Stuart, FL 34997
-----Original Message-----
From: Galin Hernandez
Sent: Apr 6, 2013 8:58 PM
Subject: KIS-List: Excess Carbon Fiber
The person who has the hangar next to mine has offered me a lot of carbon fiber
he is going to throw away. They are about 4ft wide by 20ft long rolls. It looks
like he has about 8-10 rolls.
I hate to see all this material get thrown away but it is much more than I can
ever use. If you want some, let me know and we can arrange the shipping.
Message 12
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Excess Carbon Fiber---there is no such think as excess |
carbon fiber!
Count me in as well ! Also happy to pay for any shipping!
Randy
96bt
Sent from my iPad
On Apr 6, 2013, at 8:15 PM, Mark Kettering <mantafs@earthlink.net> wrote:
>
> Hello Galin,
>
> Like everyone else I would love a roll or more and am more than happy to pay
for shipping!
>
> Thanks,
> Mark Kettering
> 2796 SE Monroe ST
> Stuart, FL 34997
>
> -----Original Message-----
>
> From: Galin Hernandez
>
> Sent: Apr 6, 2013 8:58 PM
>
> To: "kis-list@matronics.com"
>
> Subject: KIS-List: Excess Carbon Fiber
>
>
>
> The person who has the hangar next to mine has offered me a lot of carbon fiber
he is going to throw away. They are about 4ft wide by 20ft long rolls. It looks
like he has about 8-10 rolls.
>
>
> I hate to see all this material get thrown away but it is much more than I can
ever use. If you want some, let me know and we can arrange the shipping.
>
>
>
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|