Today's Message Index:
----------------------
1. 06:14 PM - Re: KIS Cruiser Crating (fasilpereira)
2. 07:16 PM - Re: Re: KIS Cruiser Crating (Galin Hernandez)
3. 07:38 PM - Re: Re: KIS Cruiser Crating (Galin Hernandez)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: KIS Cruiser Crating |
First I'd like to thank everybody that answered my question.
Robert,
I've talked to Ted today and we are thinking on removing the engine from the airframe
to reduce the weight and the loads on the fuselage.
We will try to make a frame similar to the one on the picture that Mark have uploaded.
Mark,
I know Zizo and have seen the KIS Cruiser that is in Bauru. I fly sailplanes there.
It's about 1 hour and a half from where I live. I've tried to buy that airplane
but could not get enough money. It is very beautiful and pretty close to
the first flight, although Zizo has not been working on it for a long time.
I've talked to your brother by email some months before he passed away and even
got his phone number to schedule a visit, but i was not able to get there before
I got the sad news......
I don't know anything about the KIS TR-1 that is in Brazil.
Mike and Galin,
Any picture that you can get of the airplane in the container will help me a lot.
Again, thanks to everybody and I hope to be in the KIS Cruiser Builders list and
later on the KIS Cruiser Pilots list.
Best regards,
Fabricio
--------
Fabricio Pereira
Engineer / Pilot
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=406732#406732
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: KIS Cruiser Crating |
My airplane was packaged and put in the container by Mike Monroe
(Jacksonville, FL) but I can't find a good contact number for him. If
anyone has a good number for Mike please post it since he has experience in
moving KIS4.
Galin
On Wed, Aug 14, 2013 at 9:14 PM, fasilpereira <fasilpereira@hotmail.com>wrote:
>
> First I'd like to thank everybody that answered my question.
>
> Robert,
>
> I've talked to Ted today and we are thinking on removing the engine from
> the airframe to reduce the weight and the loads on the fuselage.
> We will try to make a frame similar to the one on the picture that Mark
> have uploaded.
>
> Mark,
>
> I know Zizo and have seen the KIS Cruiser that is in Bauru. I fly
> sailplanes there. It's about 1 hour and a half from where I live. I've
> tried to buy that airplane but could not get enough money. It is very
> beautiful and pretty close to the first flight, although Zizo has not been
> working on it for a long time.
> I've talked to your brother by email some months before he passed away and
> even got his phone number to schedule a visit, but i was not able to get
> there before I got the sad news......
> I don't know anything about the KIS TR-1 that is in Brazil.
>
> Mike and Galin,
>
> Any picture that you can get of the airplane in the container will help me
> a lot.
>
> Again, thanks to everybody and I hope to be in the KIS Cruiser Builders
> list and later on the KIS Cruiser Pilots list.
> Best regards,
>
> Fabricio
>
> --------
> Fabricio Pereira
> Engineer / Pilot
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=406732#406732
>
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: KIS Cruiser Crating |
I did find an aircraft transporting company that has lots of experience
packing and moving aircraft from the US to International destinations.
http://neelaviation.com/
On Wed, Aug 14, 2013 at 9:14 PM, fasilpereira <fasilpereira@hotmail.com>wrote:
>
> First I'd like to thank everybody that answered my question.
>
> Robert,
>
> I've talked to Ted today and we are thinking on removing the engine from
> the airframe to reduce the weight and the loads on the fuselage.
> We will try to make a frame similar to the one on the picture that Mark
> have uploaded.
>
> Mark,
>
> I know Zizo and have seen the KIS Cruiser that is in Bauru. I fly
> sailplanes there. It's about 1 hour and a half from where I live. I've
> tried to buy that airplane but could not get enough money. It is very
> beautiful and pretty close to the first flight, although Zizo has not been
> working on it for a long time.
> I've talked to your brother by email some months before he passed away and
> even got his phone number to schedule a visit, but i was not able to get
> there before I got the sad news......
> I don't know anything about the KIS TR-1 that is in Brazil.
>
> Mike and Galin,
>
> Any picture that you can get of the airplane in the container will help me
> a lot.
>
> Again, thanks to everybody and I hope to be in the KIS Cruiser Builders
> list and later on the KIS Cruiser Pilots list.
> Best regards,
>
> Fabricio
>
> --------
> Fabricio Pereira
> Engineer / Pilot
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=406732#406732
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|