---------------------------------------------------------- KIS-List Digest Archive --- Total Messages Posted Wed 09/18/13: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:55 PM - Re: Trial Fit of 4 into 1 Exhaust (jerzy krasinski) 2. 09:01 PM - Re: Trial Fit of 4 into 1 Exhaust (Robert Reed) ________________________________ Message 1 _____________________________________ Time: 07:55:24 PM PST US From: jerzy krasinski Subject: Re: KIS-List: Trial Fit of 4 into 1 Exhaust Did you run the engine with it?=0AWill it survivwe the vibrations?=0A=0AJer zy=0A=0A=0A________________________________=0A From: Robert Reed =0ATo: "kis-list@matronics.com" =0ASent: Saturday, September 14, 2013 10:40 PM=0ASubject: KIS-List: Trial Fit of 4 into 1 Exhaust=0A =0A=0A=0AThree and 1 / 2 years after I did the initial mo ckup for the 4 into 1 exhaust system I finally received it this week and di d the trial fit today.- The workmanship and the fit were excellent and it has good clearance everywhere.- That PVC mockup process really works gre at.=0A-=0AI am working on the final glass work on the cowling now and thi s will help determine any clearance issues with the bottom of the cowling. - I have decided against the extended fairing from the lower cowling unde r the fuselage.- I may add it later after the plane is flying if I find t hat cooling is not an issue.- =0A-=0AWith any luck I will finish the la st of the fiberglass work on the cowling and-the windscreen by the end of September or first of October.- Trying to complete glass before cool wea ther.- It's been a long and very hot summer working on the plane but prog ress is being made although far to slowly.- Who knows, another 15 years a nd I might just finish this thing.=0A-=0ABob Reed ________________________________ Message 2 _____________________________________ Time: 09:01:27 PM PST US From: Robert Reed Subject: Re: KIS-List: Trial Fit of 4 into 1 Exhaust Jerzy,=0A-=0ANo, I haven't done the first engine start yet and it will pr obably be after the first of the year before I do.- My single objective r ight now is to finish ALL glasswork before the temperature starts falling a nd then do the prime and painting during the winter cool weather.=0A-=0AE ach of the exhaust tubes have a ball joint in the system to allow some flex ability.- I have a hangar point behind the collector and two on the firew all.- Will be using flexable hanger straps with stainless clamps.- Vibr ation should not be a problem but I have learned there are no guarantees. =0A-=0ABob=0A =0A=0A________________________________=0A From: jerzy krasi nski =0ATo: "kis-list@matronics.com" =0ASent: Wednesday, September 18, 2013 9:55 PM=0ASubject: Re: KIS-List: Trial Fit of 4 into 1 Exhaust=0A =0A=0A=0ADid you run the e ngine with it?=0AWill it survivwe the vibrations?=0A=0AJerzy=0A =0A=0A_____ ___________________________=0A From: Robert Reed =0ATo: "kis-list@matronics.com" =0ASent: Saturday, Septe mber 14, 2013 10:40 PM=0ASubject: KIS-List: Trial Fit of 4 into 1 Exhaust =0A =0A=0A=0AThree and 1 / 2 years after I did the initial mockup for the 4 into 1 exhaust system I finally received it this week and did the trial f it today.- The workmanship and the fit were excellent and it has good cle arance everywhere.- That PVC mockup process really works great.=0A=0AI am working on the final glass work on the cowling now and this will help dete rmine any clearance issues with the bottom of the cowling.- I have decide d against the extended fairing from the lower cowling under the fuselage. - I may add it later after the plane is flying if I find that cooling is not an issue.- =0A=0AWith any luck I will finish the last of the fibergla ss work on the cowling and-the windscreen by the end of September or firs t of October.- Trying to complete glass before cool weather.- It's been a long and very hot summer working on the plane but progress is being made although far to slowly.- Who knows, another 15 years and I might just fi ======== ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kis-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/KIS-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kis-list Browse Digests http://www.matronics.com/digest/kis-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.