Today's Message Index:
----------------------
1. 06:42 PM - Finishing the inside of the fuselage of a TR4 (Mike Pienaar)
2. 07:40 PM - Re: Finishing the inside of the fuselage of a TR4 (William Schertz)
3. 09:29 PM - Re: Finishing the inside of the fuselage of a TR4 (Scott Stearns)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Finishing the inside of the fuselage of a TR4 |
Hi,
Could I please get some ideas on how to finish the inside of the fuselage.
I am thinking of painting the "roof" inside and carpeting only the areas
where your feet are.
In the baggage compartment I want to put carpet, should I reinforce the
baggage compartment floor and do I need something to keep the baggage from
flying about.
Has anybody had experience with Zolatone paint
One of my main concerns is finishing off around the footwells, the front of
the seat bulkheads and areas that are not covered by upholstery
Thanks
Mike
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Finishing the inside of the fuselage of a TR4 |
I used a spray paint (rattle can) for the interior roof and doors. Spray on
a coat of high build gray primer, then spray on a product that is locally
called 'trunk paint'. It resembles Zolatone, is gray with white flecks in
it. Needs the gray primer underneath to look good. I then overcoated it with
spray polyurethane to increase the durability. It ended up looking good, and
has been durable.
-----Original Message-----
From: Mike Pienaar
Sent: Monday, September 30, 2013 8:42 PM
Subject: KIS-List: Finishing the inside of the fuselage of a TR4
Hi,
Could I please get some ideas on how to finish the inside of the fuselage.
I am thinking of painting the "roof" inside and carpeting only the areas
where your feet are.
In the baggage compartment I want to put carpet, should I reinforce the
baggage compartment floor and do I need something to keep the baggage from
flying about.
Has anybody had experience with Zolatone paint
One of my main concerns is finishing off around the footwells, the front of
the seat bulkheads and areas that are not covered by upholstery
Thanks
Mike
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Finishing the inside of the fuselage of a TR4 |
I used zolatone. It has held up pretty well, but acetone will wipe it off. I
did not prime before application. I would recommend primer, saves a lot of zolatone.
It might be worth looking into the flamability of what ever you use.
Scott.
On Sep 30, 2013, at 6:42 PM, "Mike Pienaar" <mjpienaar@shaw.ca> wrote:
>
> Hi,
>
> Could I please get some ideas on how to finish the inside of the fuselage.
>
> I am thinking of painting the "roof" inside and carpeting only the areas where
your feet are.
>
> In the baggage compartment I want to put carpet, should I reinforce the baggage
compartment floor and do I need something to keep the baggage from flying about.
>
> Has anybody had experience with Zolatone paint
>
> One of my main concerns is finishing off around the footwells, the front of the
seat bulkheads and areas that are not covered by upholstery
>
> Thanks
>
> Mike
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|