---------------------------------------------------------- KIS-List Digest Archive --- Total Messages Posted Tue 10/29/13: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:07 AM - Re: Wing removal on a TR-1 (Keith.Miller@esa.int) 2. 11:59 AM - Re: Wing removal on a TR-1 (Scott Stearns) 3. 07:06 PM - Re: Wing removal on a TR-1 (Mark Kettering) 4. 07:56 PM - Re: Wing removal on a TR-1 (Scott Stearns) 5. 08:55 PM - Re: Wing removal on a TR-1 (BarryH) ________________________________ Message 1 _____________________________________ Time: 01:07:30 AM PST US Subject: Re: KIS-List: Wing removal on a TR-1 From: Keith.Miller@esa.int Yes , it can be dropped out with all the gear in place, i did it on many occassions during the build , and once after the completion. Keith From: Mark Kettering To: kis-list@matronics.com, Date: 10/29/2013 02:42 AM Subject: Re: KIS-List: Wing removal on a TR-1 Sent by: owner-kis-list-server@matronics.com On mine it will but it is not an easy fit. Some light bending of the wing skins and a little force are needed. But each build is a little different. -----Original Message----- >From: BarryH >Sent: Oct 28, 2013 12:41 PM >To: kis-list@matronics.com >Subject: KIS-List: Wing removal on a TR-1 > > >Can anyone tell me if the wing will drop out with the gear in place on a tricycle gear TR-1? Any information would be greatly appreciated. > > >Read this topic online here: > >http://forums.matronics.com/viewtopic.php?p=411603#411603 > > This message and any attachments are intended for the use of the addressee or addressees only. The unauthorised disclosure, use, dissemination or copying (either in whole or in part) of its content is not permitted. If you received this message in error, please notify the sender and delete it from your system. Emails can be altered and their integrity cannot be guaranteed by the sender. Please consider the environment before printing this email. ________________________________ Message 2 _____________________________________ Time: 11:59:33 AM PST US From: Scott Stearns Subject: Re: KIS-List: Wing removal on a TR-1 Here is a picture of the wing removal-tool I built.- It has 4x4s at the corners and is on wheels.--The vertical 2x4s-should be vertical and not angled like the picture.- The wing drops out-of the fuselage and sl ips between the 2x4s before it comes out-of the fuselage so-the wing is always supported.- It is also really nice to have the wing on wheels.=0A -=0AIt makes it a one man job and pretty low stress.- The wing probably went on with the gear on so it should come off.=0A-=0AScott=0A=0A=0A=0AO n Tuesday, October 29, 2013 1:13 AM, "Keith.Miller@esa.int" =0ATo:--- kis-list@matronics.com,=0ADate:--- 10/29/2013 02: 42 AM=0ASubject:--- Re: KIS-List: Wing removal on a TR-1=0ASent by: --- owner-kis-list-server@matronics.com=0A=0A=0A=0A--> KIS-List messa ge posted by: Mark Kettering =0A=0A=0AOn mine it wil l but it is not an easy fit.- Some light bending of the wing=0Askins and a little force are needed. But each build is a little different.=0A=0A=0A-- ---Original Message-----=0A>From: BarryH =0A>Sent: Oc t 28, 2013 12:41 PM=0A>To: kis-list@matronics.com=0A>Subject: KIS-List: Win ttds@gmail.com>=0A>=0A>Can anyone tell me if the wing will drop out with th e gear in place on a=0Atricycle gear TR-1? Any information would be greatly appreciated.=0A>=0A>=0A>=0A>=0A>Read this topic online here:=0A>=0A>http:/ /forums.matronics.com/viewtopic.php?p=411603#411603=0A>=0A>=0A>=0A>=0A> =0A>=0A>=0A>=0A>=0A>=0A=0A=0A=0A=0A=0A=0A=0A=0AThis message and any attachm ents are intended for the use of the addressee or addressees only. The unau thorised disclosure, use, dissemination or copying (either in whole or in p art) of its content is not permitted. If you received this message in error , please notify the sender and delete it from your system. Emails can be al tered and their integrity cannot be guaranteed by the sender.=0A=0APlease c - - - - - - - - - - - - - - - -Matt Dralle, L ======= ________________________________ Message 3 _____________________________________ Time: 07:06:41 PM PST US From: Mark Kettering Subject: Re: KIS-List: Wing removal on a TR-1 All I can say is that picture makes me want a Yak. And I love your tail wheel stand. And your wing tool is very cool. I think I will be making one. -----Original Message----- From: Scott Stearns Sent: Oct 29, 2013 2:56 PM Subject: Re: KIS-List: Wing removal on a TR-1 Here is a picture of the wing removal tool I built. It has 4x4s at the corners and is on wheels. The vertical 2x4s should be vertical and not angled like the picture. The wing drops out of the fuselage and slips between the 2x4s before it comes out of the fuselage so the wing is always supported. It is also really nice to have the wing on wheels. It makes it a one man job and pretty low stress. The wing probably went on with the gear on so it should come off. Scott On Tuesday, October 29, 2013 1:13 AM, "Keith.Miller@esa.int" wrote: Yes , it can be dropped out with all the gear in place, i did it on many occassions during the build , and once after the completion. Keith From: Mark Kettering Subject: Re: KIS-List: Wing removal on a TR-1 Sent by: owner-kis-list-server@matronics.com On mine it will but it is not an easy fit. Some light bending of the wing skins and a little force are needed. But each build is a little different. -----Original Message----- >From: BarryH >Sent: Oct 28, 2013 12:41 PM >To: kis-list@matronics.com >Subject: KIS-List: Wing removal on a TR-1 > > >Can anyone tell me if the wing will drop out with the gear in place on a tricycle gear TR-1? Any information would be greatly appreciated. > > >Read this topic online here: > >http://forums.matronics.com/viewtopic.php?p=411603#411603 > > This message and any attachments are intended for the use of the addressee or addressees only. The unauthorised disclosure, use, dissemination or copying (either in whole or in part) of its content is not permitted. If you received this message in error, please notify the sender and delete it from your system. Emails can be altered and their integrity cannot be guaranteed by the sender. Please conmatronics.com/Navigator?KIS-List" target="_blank">http://www.matronics.co= - MATRONICS WEB FORUMS="http://forums.matronics.com/" target="_blank">http://forums.matronics tronics.com/contribution" target="_blank">http://www.matronics.com/contri=============== ________________________________ Message 4 _____________________________________ Time: 07:56:35 PM PST US Subject: Re: KIS-List: Wing removal on a TR-1 From: Scott Stearns The Yak is for sale. Price is about $1M but open to offers. 1600 HP R-2000. It will just walk away from anything with a propeller short of the gold class at reno. It really pisses the mustang crowd off. "work of art" build quality. Scott On Oct 29, 2013, at 7:06 PM, Mark Kettering wrote: > > > All I can say is that picture makes me want a Yak. > > And I love your tail wheel stand. > > And your wing tool is very cool. I think I will be making one. > > > -----Original Message----- > > From: Scott Stearns > > Sent: Oct 29, 2013 2:56 PM > > To: "kis-list@matronics.com" > > Subject: Re: KIS-List: Wing removal on a TR-1 > > > > Here is a picture of the wing removal tool I built. It has 4x4s at the corners and is on wheels. The vertical 2x4s should be vertical and not angled like the picture. The wing drops out of the fuselage and slips between the 2x4s before it comes out of the fuselage so the wing is always supported. It is also really nice to have the wing on wheels. It makes it a one man job and pretty low stress. The wing probably went on with the gear on so it should come off. Scott > > On Tuesday, October 29, 2013 1:13 AM, "Keith.Miller@esa.int" wrote: > > Yes , it can be dropped out with all the gear in place, i did it on many > occassions during the build , and once after the completion. > > Keith > > > > From: Mark Kettering > To: kis-list@matronics.com, > Date: 10/29/2013 02:42 AM > Subject: Re: KIS-List: Wing removal on a TR-1 > Sent by: owner-kis-list-server@matronics.com > > > > > > On mine it will but it is not an easy fit. Some light bending of the wing > skins and a little force are needed. But each build is a little different. > > > -----Original Message----- >> From: BarryH >> Sent: Oct 28, 2013 12:41 PM >> To: kis-list@matronics.com >> Subject: KIS-List: Wing removal on a TR-1 >> >> >> Can anyone tell me if the wing will drop out with the gear in place on a > tricycle gear TR-1? Any information would be greatly appreciated. >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=411603#411603 >> >> >> >> >> >> >> >> >> >> > > > > > > > > > This message and any attachments are intended for the use of the addressee or addressees only. The unauthorised disclosure, use, dissemination or copying (either in whole or in part) > of its content is not permitted. If you received this message in error, please notify the sender and delete it from your system. Emails can be altered and their integrity cannot be guaranteed by the sender. > > Please conmatronics.com/Navigator?KIS-List" target="_blank">http://www.matronics.co= - MATRONICS WEB FORUMS="http://forums.matronics.com/" target="_blank">http://forums.matronics tronics.com/contribution" target="_blank">http://www.matronics.com/contri=============== > > > > ________________________________ Message 5 _____________________________________ Time: 08:55:51 PM PST US Subject: KIS-List: Re: Wing removal on a TR-1 From: "BarryH" Thanks guys for the information. I just purchased a TR-1 and i am going to get it this weekend. Need to transport it home as it is not currently airworthy. That will make it much easier not having to remove the gear. I also have seen where some people have had some of the wing spar bolts seized as well. Hopefully this is not the case. This plane has been out in the weather for about 9 years though. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=411727#411727 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kis-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/KIS-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kis-list Browse Digests http://www.matronics.com/digest/kis-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.