---------------------------------------------------------- KIS-List Digest Archive --- Total Messages Posted Thu 03/20/14: 12 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:31 AM - Re: TR4 cowling. (Galin Hernandez) 2. 07:37 AM - Re: TR4 cowling. (Mark Kettering) 3. 08:39 AM - Re: TR4 cowling. (Alfred Rosa) 4. 08:52 AM - Re: TR4 cowling. (Robert Reed) 5. 09:36 AM - Re: TR4 cowling. (jerzy krasinski) 6. 03:28 PM - Re: TR4 cowling. (Mark Kettering) 7. 03:40 PM - Re: TR4 cowling. (Mark Kettering) 8. 03:42 PM - Re: TR4 cowling. (jerzy krasinski) 9. 03:59 PM - Re: TR4 cowling. (Scott Stearns) 10. 04:03 PM - Re: TR4 cowling. (Mark Kettering) 11. 04:08 PM - Re: TR4 cowling. (Scott Stearns) 12. 04:08 PM - Re: TR4 cowling. (Robert Reed) ________________________________ Message 1 _____________________________________ Time: 07:31:24 AM PST US From: Galin Hernandez Subject: Re: KIS-List: TR4 cowling. I am in St Augustine and I have a Lycoming O-360 in my airplane. Maybe we can get together and make a mold out of my cowl. On Wed, Mar 19, 2014 at 7:45 PM, Alfred Rosa wrote: > Near the Venice FL municipal airport. > > Sent from my iPhone > > On Mar 19, 2014, at 6:05 PM, Galin Hernandez wrote: > > Al, where are you located? > > > On Wed, Mar 19, 2014 at 10:23 AM, Alfred Rosa wrote: > >> >> Mark or someone , is there a cowling out there for sale? Desperate for a >> cowling. >> Al rosa >> >> >> Sent from my iPhone >> >> ========== >> rget="_blank">http://www.matronics.com/Navigator?KIS-List >> ========== >> http://forums.matronics.com >> ========== >> le, List Admin. >> ="_blank">http://www.matronics.com/contribution >> ========== >> >> >> >> > > > * > > > * > > ________________________________ Message 2 _____________________________________ Time: 07:37:12 AM PST US From: Mark Kettering Subject: Re: KIS-List: TR4 cowling. Hi Al, Scott and I have both a Lycoming 360 cowl in carbon fiber and a Continental 6 cylinder cowl in fiberglass. The problem is we do not know for sure what one we will be using until we get an engine and do a trial fit. This is 6 to 12 months away. What is your time frame? FYI, these cowls are Camarillo, CA. Mark -----Original Message----- From: Alfred Rosa Sent: Mar 19, 2014 7:45 PM Subject: Re: KIS-List: TR4 cowling. Near the Venice FL municipal airport. Sent from my iPhone On Mar 19, 2014, at 6:05 PM, Galin Hernandez wrote: Al, where are you located? On Wed, Mar 19, 2014 at 10:23 AM, Alfred Rosa wrote: Mark or someone , is there a cowling out there for sale? Desperate for a cowling. Al rosa Sent from my iPhone ========== rget="_blank">http://www.matronics.com/Navigator?KIS-List ========== http://forums.matronics.com ========== le, List Admin. ="_blank">http://www.matronics.com/contribution ========== ________________________________ Message 3 _____________________________________ Time: 08:39:49 AM PST US Subject: Re: KIS-List: TR4 cowling. From: Alfred Rosa Actually the time frame and location would be ideal. I may be trading my incomplete TR4 for a flying TR1. The party SIDDARTHA BRAVO is in CA and he was concerned that finding a cowling might be impossible. At least now I can assure him that getting one is possible. On Thu, Mar 20, 2014 at 10:36 AM, Mark Kettering wrote: > > Hi Al, > > Scott and I have both a Lycoming 360 cowl in carbon fiber and a > Continental 6 cylinder cowl in fiberglass. The problem is we do not know > for sure what one we will be using until we get an engine and do a trial > fit. This is 6 to 12 months away. What is your time frame? FYI, these > cowls are Camarillo, CA. > > Mark > > -----Original Message----- > > From: Alfred Rosa > > Sent: Mar 19, 2014 7:45 PM > > To: "kis-list@matronics.com" > > Subject: Re: KIS-List: TR4 cowling. > > > Near the Venice FL municipal airport. > > Sent from my iPhone > On Mar 19, 2014, at 6:05 PM, Galin Hernandez wrote: > > Al, where are you located? > > On Wed, Mar 19, 2014 at 10:23 AM, Alfred Rosa wrote: > > > > > Mark or someone , is there a cowling out there for sale? Desperate for a > cowling. > > Al rosa > > > Sent from my iPhone > > > ========== > > rget="_blank">http://www.matronics.com/Navigator?KIS-List > > ========== > > http://forums.matronics.com > > ========== > > le, List Admin. > > ="_blank">http://www.matronics.com/contribution > > ========== > > ________________________________ Message 4 _____________________________________ Time: 08:52:15 AM PST US From: Robert Reed Subject: Re: KIS-List: TR4 cowling. Considering the fact that obtaining parts in the future may be entirely upt o the current builders / flyers it would be great if we could get some mold s made off of those parts before you start any modifications and trimming. - This would be true for the wing tips as well.- Those are probably the most vulnerable parts that would ever need replacement.- Would that be a possibility?=0A-=0ABob Reed=0A=0AFrom: Mark Kettering =0ATo: kis-list@matronics.com =0ASent: Thursday, March 20, 2014 9:36 A M=0ASubject: Re: KIS-List: TR4 cowling.=0A=0A=0A--> KIS-List message posted by: Mark Kettering =0A=0AHi Al,=0A=0AScott and I ha ve both a Lycoming 360 cowl in carbon fiber and a Continental 6 cylinder co wl in fiberglass.- The problem is we do not know for sure what one we wil l be using until we get an engine and do a trial fit.- This is 6 to 12 mo nths away.- What is your time frame?- FYI, these cowls are Camarillo, C A.=0A=0AMark=0A=0A-----Original Message-----=0A=0AFrom: Alfred Rosa =0A=0AS ent: Mar 19, 2014 7:45 PM=0A=0ATo: "kis-list@matronics.com" =0A=0ASubject: Re: KIS-List: TR4 cowling.=0A=0A=0A=0ANear the Venice FL municipal airport. =0A=0ASent from my iPhone=0AOn Mar 19, 2014, at 6:05 PM, Galin Hernandez < galinhdz@gmail.com> wrote:=0A=0AAl, where are you located?=0A=0AOn Wed, Mar 19, 2014 at 10:23 AM, Alfred Rosa wrote:=0A=0A=0A--> KIS-List message posted by: Alfred Rosa =0A=0A=0A=0A =0A=0AMark or someone ,- is there a cowling out there for sale? Desperate for a cowling.=0A=0AAl rosa=0A=0A=0A=0A=0A=0ASent from my iPhone=0A=0A=0A =0A============0A=0Arget="_blank">http://www.matron ics.com/Navigator?KIS-List=0A=0A============0A=0Ahttp ://forums.matronics.com=0A=0A============0A=0Ale, Lis t Admin.=0A=0A="_blank">http://www.matronics.com/contribution=0A=0A== ==========0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A ============ ________________________________ Message 5 _____________________________________ Time: 09:36:06 AM PST US From: jerzy krasinski Subject: Re: KIS-List: TR4 cowling. Mark,=0A=0AI wonder what happened with your carbon KIS Cruiser . Have you m anaged to put that plane together?=0A=0AJerzy=0A=0A=0A_____________________ ___________=0A From: Robert Reed =0ATo: "kis-list@matro nics.com" =0ASent: Thursday, March 20, 2014 10:51 AM=0ASubject: Re: KIS-List: TR4 cowling.=0A =0A=0A=0AConsidering the fact t hat obtaining parts in the future may be entirely upto the current builders / flyers it would be great if we could get some molds made off of those pa rts before you start any modifications and trimming.- This would be true for the wing tips as well.- Those are probably the most vulnerable parts that would ever need replacement.- Would that be a possibility?=0A-=0AB ob Reed=0A=0AFrom: Mark Kettering =0ATo: kis-list@ma tronics.com =0ASent: Thursday, March 20, 2014 9:36 AM=0ASubject: Re: KIS-Li ntafs@earthlink.net>=0A=0AHi Al,=0A=0AScott and I have both a Lycoming 360 cowl in carbon fiber and a Continental 6 cylinder cowl in fiberglass.- Th e problem is we do not know for sure what one we will be using until we get an engine and do a trial fit.- This is 6 to 12 months away.- What is y our time frame?- FYI, these cowls are Camarillo, CA.=0A=0AMark=0A=0A----- Original Message-----=0A=0AFrom: Alfred Rosa =0A=0ASent: Mar 19, 2014 7:45 PM=0A=0ATo: "kis-list@matronics.com" =0A=0ASubject: Re: KIS-List: TR4 cowli ng.=0A=0A=0A=0ANear the Venice FL municipal airport. =0A=0ASent from my iPh one=0AOn Mar 19, 2014, at 6:05 PM, Galin Hernandez wro te:=0A=0AAl, where are you located?=0A=0AOn Wed, Mar 19, 2014 at 10:23 AM, Alfred Rosa wrote:=0A=0A=0A--> KIS-List message poste d by: Alfred Rosa =0A=0A=0A=0A=0A=0AMark or someone , - is there a cowling out there for sale? Desperate for a cowling.=0A=0AAl rosa=0A=0A=0A=0A=0A=0ASent from my iPhone=0A=0A=0A=0A======= =====0A=0Arget="_blank">http://www.matronics.com/Navigator?KIS-Li st=0A=0A============0A=0Ahttp://forums.matronics.com =0A=0A============0A=0Ale, List Admin.=0A=0A="_blan k">http://www.matronics.com/contribution=0A=0A========= ======= ________________________________ Message 6 _____________________________________ Time: 03:28:33 PM PST US From: Mark Kettering Subject: Re: KIS-List: TR4 cowling. Scott and I are now partners in it and he is putting it together in CA. The plan is to put a modified 300+ hp Lycoming IO-540 in it. -----Original Message----- From: jerzy krasinski Sent: Mar 20, 2014 12:31 PM Subject: Re: KIS-List: TR4 cowling. Mark, I wonder what happened with your carbon KIS Cruiser . Have you managed to put that plane together? Jerzy From: Robert Reed To: "kis-list@matronics.com" Sent: Thursday, March 20, 2014 10:51 AM Subject: Re: KIS-List: TR4 cowling. Considering the fact that obtaining parts in the future may be entirely upto the current builders / flyers it would be great if we could get some molds made off of those parts before you start any modifications and trimming. This would be true for the wing tips as well. Those are probably the most vulnerable parts that would ever need replacement. Would that be a possibility? Bob Reed From: Mark Kettering Sent: Thursday, March 20, 2014 9:36 AM Subject: Re: KIS-List: TR4 cowling. Hi Al, Scott and I have both a Lycoming 360 cowl in carbon fiber and a Continental 6 cylinder cowl in fiberglass. The problem is we do not know for sure what one we will be using until we get an engine and do a trial fit. This is 6 to 12 months away. What is your time frame? FYI, these cowls are Camarillo, CA. Mark -----Original Message----- From: Alfred Rosa Sent: Mar 19, 2014 7:45 PM Subject: Re: KIS-List: TR4 cowling. Near the Venice FL municipal airport. Sent from my iPhone On Mar 19, 2014, at 6:05 PM, Galin Hernandez wrote: Al, where are you located? On Wed, Mar 19, 2014 at 10:23 AM, Alfred Rosa wrote: Mark or someone , is there a cowling out there for sale? Desperate for a cowling. Al rosa Sent from my iPhone ========== rget="_blank">http://www.matronics.com/Navigator?KIS-List ========== http://forums.matronics.com ========== le, List Admin. ="_blank">http://www.matronics.com/contribution ========== http://www.matronics.ctarget="_blank" href="http://forums.matronics.com/">http://forums.matro --> http://www.matronics.com/Navigator?KIS-List ========== http://forums.matronics.com ========== le, List Admin. ="_blank">http://www.matronics.com/contribution ========== =0ATo: "kis-list@matronics.com" =0ASent: Thu rsday, March 20, 2014 10:51 AM=0ASubject: Re: KIS-List: TR4 cowling.=0A- =0AConsidering the fact that obtaining parts=0Ain the future may be entirel y upto the current builders / flyers it would be great if we could get some molds made off of those parts before you start any modifications and trimm ing.- This would be true for the wing tips as well.- Those are probably the most vulnerable parts that would ever need replacement.- Would that be a possibility?=0A=0ABob Reed=0A=0A=0A=0A=0A=0AFrom: Mark Kettering =0ATo: kis-list@matronics.com =0ASent: Thursday, March 20 , 2014 9:36 AM=0ASubject: Re: KIS-List: TR4 cowling.=0A=0A=0A--> KIS-List m essage posted by: Mark Kettering =0A=0AHi Al,=0A=0AS cott and I have both a Lycoming 360 cowl in carbon fiber and a Continental 6 cylinder cowl in fiberglass.- The problem is we do not know for sure wh at one we will be using until we get an engine and do a trial fit.- This is 6 to 12 months away.- What is your time frame?- FYI, these cowls are Camarillo, CA.=0A=0AMark=0A=0A-----Original Message-----=0A=0AFrom: Alfred Rosa =0A=0ASent: Mar 19, 2014 7:45 PM=0A=0ATo: "kis-list@matronics.com" =0A=0ASubject: Re: KIS-List: TR4 cowling.=0A=0A=0A=0ANear the Venice FL mun icipal airport. =0A=0ASent from my=0AiPhone=0AOn Mar 19, 2014, at 6:05 PM, Galin Hernandez wrote:=0A=0AAl, where are you located? =0A=0AOn Wed, Mar 19, 2014 at 10:23 AM, Alfred Rosa w com>=0A=0A=0A=0A=0A=0AMark or someone ,- is there a cowling out there for sale? Desperate for a cowling.=0A=0AAl rosa=0A=0A=0A=0A=0A=0ASent from my iPhone=0A=0A=0A=0A============0A=0Arget="_blank">ht tp://www.matronics.com/Navigator?KIS-List=0A=0A========= ===0A=0Ahttp://forums.matronics.com=0A=0A========== ==0A=0Ale, List Admin.=0A=0A="_blank">http://www.matronics.com/contribu tion=0A=0A============0A=0A=0A=0A=0A=0A=0A=0A=0A=0A =0A=0A=0A=0A=0A=0A=0A=0A=0Ahttp://www.matronics.ctarget="_blank" href=" http://forums.matronics.com/">http://forums.matro- --> > Subject: Re: KIS-List: TR4 cowling. > > > > Mark, > I wonder what happened with your carbon KIS Cruiser . Have you managed to p ut that plane together? > Jerzy > From: Robert Reed > To: "kis-list@matronics.com" > Sent: Thursday, March 20, 2014 10:51 AM > Subject: Re: KIS-List: TR4 cowling. > > Considering the fact that obtaining parts > in the future may be entirely upto the current builders / flyers it would b e great if we could get some molds made off of those parts before you start a ny modifications and trimming. This would be true for the wing tips as well . Those are probably the most vulnerable parts that would ever need replace ment. Would that be a possibility? > > Bob Reed > > > > > > From: Mark Kettering > To: kis-list@matronics.com > Sent: Thursday, March 20, 2014 9:36 AM > Subject: Re: KIS-List: TR4 cowling. > > > > Hi Al, > > Scott and I have both a Lycoming 360 cowl in carbon fiber and a Continenta l 6 cylinder cowl in fiberglass. The problem is we do not know for sure wha t one we will be using until we get an engine and do a trial fit. This is 6 to 12 months away. What is your time frame? FYI, these cowls are Camarill o, CA. > > Mark > > -----Original Message----- > > From: Alfred Rosa > > Sent: Mar 19, 2014 7:45 PM > > To: "kis-list@matronics.com" > > Subject: Re: KIS-List: TR4 cowling. > > > > Near the Venice FL municipal airport. > > Sent from my > iPhone > On Mar 19, 2014, at 6:05 PM, Galin Hernandez wrote: > > Al, where are you located? > > On Wed, Mar 19, 2014 at 10:23 AM, Alfred Rosa wrote: > > > > > > > > Mark or someone , is there a cowling out there for sale? Desperate for a c owling. > > Al rosa > > > > > > Sent from my iPhone > > > > ========== > > rget="_blank">http://www.matronics.com/Navigator?KIS-List > > ========== > > http://forums.matronics.com > > ========== > > le, List Admin. > > ="_blank">http://www.matronics.com/contribution > > ========== > > > > > > > > > > > > > > > > > > > http://www.matronics.ctarget="_blank" href="http://forums.matronics.co m/">http://forums.matro --> Sent: Thursday, March 20, 2014 10:51 AM Subject: Re: KIS-List: TR4 cowling. Considering the fact that obtaining parts in the future may be entirely upto the current builders / flyers it would be great if we could get some molds made off of those parts before you start any modifications and trimming. This would be true for the wing tips as well. Those are probably the most vulnerable parts that would ever need replacement. Would that be a possibility? Bob Reed From: Mark Kettering Sent: Thursday, March 20, 2014 9:36 AM Subject: Re: KIS-List: TR4 cowling. Hi Al, Scott and I have both a Lycoming 360 cowl in carbon fiber and a Continental 6 cylinder cowl in fiberglass. The problem is we do not know for sure what one we will be using until we get an engine and do a trial fit. This is 6 to 12 months away. What is your time frame? FYI, these cowls are Camarillo, CA. Mark -----Original Message----- From: Alfred Rosa Sent: Mar 19, 2014 7:45 PM Subject: Re: KIS-List: TR4 cowling. Near the Venice FL municipal airport. Sent from my iPhone On Mar 19, 2014, at 6:05 PM, Galin Hernandez wrote: Al, where are you located? On Wed, Mar 19, 2014 at 10:23 AM, Alfred Rosa wrote: Mark or someone , is there a cowling out there for sale? Desperate for a cowling. Al rosa Sent from my iPhone ========== rget="_blank">http://www.matronics.com/Navigator?KIS-List ========== http://forums.matronics.com ========== le, List Admin. ="_blank">http://www.matronics.com/contribution ========== http://www.matronics.ctarget="_blank" href="http://forums.matronics.com/">http://forums.matro --> > Subject: Re: KIS-List: TR4 cowling. > > > > Considering the fact that obtaining parts in the future may be entirely upto the current builders / flyers it would be great if we could get some molds made off of those parts before you start any modifications and trimming. This would be true for the wing tips as well. Those are probably the most vulnerable parts that would ever need replacement. Would that be a possibility? > > Bob Reed > > > > > > From: Mark Kettering > To: kis-list@matronics.com > Sent: Thursday, March 20, 2014 9:36 AM > Subject: Re: KIS-List: TR4 cowling. > > > > Hi Al, > > Scott and I have both a Lycoming 360 cowl in carbon fiber and a Continental 6 cylinder cowl in fiberglass. The problem is we do not know for sure what one we will be using until we get an engine and do a trial fit. This is 6 to 12 months away. What is your time frame? FYI, these cowls are Camarillo, CA. > > Mark > > -----Original Message----- > > From: Alfred Rosa > > Sent: Mar 19, 2014 7:45 PM > > To: "kis-list@matronics.com" > > Subject: Re: KIS-List: TR4 cowling. > > > > Near the Venice FL municipal airport. > > Sent from my iPhone > On Mar 19, 2014, at 6:05 PM, Galin Hernandez wrote: > > Al, where are you located? > > On Wed, Mar 19, 2014 at 10:23 AM, Alfred Rosa wrote: > > > > > > > > Mark or someone , is there a cowling out there for sale? Desperate for a cowling. > > Al rosa > > > > > > Sent from my iPhone > > > > ========== > > rget="_blank">http://www.matronics.com/Navigator?KIS-List > > ========== > > http://forums.matronics.com > > ========== > > le, List Admin. > > ="_blank">http://www.matronics.com/contribution > > ========== > > > > > > > > > > > > =0ATo: kis-list@matronics.com =0ASent: Thursday, March 20, 2014 9: 36 AM=0ASubject: Re: KIS-List: TR4 cowling.=0A=0A=0A--> KIS-List message po sted by: Mark Kettering =0A=0AHi Al,=0A=0AScott and I have both a Lycoming 360 cowl in carbon fiber and a Continental 6 cylinde r cowl in fiberglass.- The problem is we do not know for sure what one we will be using until we get an engine and do a trial fit.- This is 6 to 1 2 months away.- What is your time frame?- FYI, these cowls are Camarill o, CA.=0A=0AMark=0A=0A-----Original Message-----=0A=0AFrom: Alfred Rosa =0A =0ASent: Mar 19, 2014 7:45 PM=0A=0ATo: "kis-list@matronics.com" =0A=0ASubje ct: Re: KIS-List: TR4 cowling.=0A=0A=0A=0ANear the Venice FL municipal airp ort. =0A=0ASent from my iPhone=0AOn Mar 19, 2014, at 6:05 PM, Galin Hernand ez wrote:=0A=0AAl, where are you located?=0A=0AOn Wed, Mar 19, 2014 at 10:23 AM, Alfred Rosa wrote:=0A=0A =0A=0A=0A=0AMark or someone ,- is there a cowling out there for sale? Des perate for a cowling.=0A=0AAl rosa=0A=0A=0A=0A=0A=0ASent from my iPhone=0A =0A=0A=0A============0A=0Arget="_blank">http://www. matronics.com/Navigator?KIS-List=0A=0A============0A =0Ahttp://forums.matronics.com=0A=0A============0A=0A le, List Admin.=0A=0A="_blank">http://www.matronics.com/contribution=0A =0A============0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A