---------------------------------------------------------- KIS-List Digest Archive --- Total Messages Posted Tue 09/02/14: 8 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:49 AM - Re: My new propeller shipped today. (Hans Christian Erstad) 2. 02:09 AM - Re: My new propeller shipped today. (Keith.Miller@esa.int) 3. 02:49 AM - Re: My new propeller shipped today. (Hans Christian Erstad) 4. 04:07 AM - Re: My new propeller shipped today. (Keith.Miller@esa.int) 5. 04:48 AM - Re: My new propeller shipped today. (Hans Christian Erstad) 6. 05:18 AM - Re: My new propeller shipped today. (Galin Hernandez) 7. 07:48 AM - Re: My new propeller shipped today. (Scott Stearns) 8. 12:37 PM - Re: My new propeller shipped today. (Mark Kettering) ________________________________ Message 1 _____________________________________ Time: 01:49:46 AM PST US Subject: Re: KIS-List: My new propeller shipped today. From: Hans Christian Erstad Yes, it look AWESOME! Keep us updated on how it performs. I have been thinking about a new propeller for my TR-1, with finer pitch than I have now. May I ask now much $ Catto need to make one? Hans Christian 2014-09-02 3:05 GMT+02:00 Galin Hernandez : > Here are two photos of my new CATTO 3 bladed composite propeller that > shipped today. The propeller tips are painted the same color as the tail > number. I think it looks AWESOME! > > Now let's see how it performs. > ________________________________ Message 2 _____________________________________ Time: 02:09:21 AM PST US Subject: Re: KIS-List: My new propeller shipped today. From: Keith.Miller@esa.int Hans , i suspect shipping from the USA to Europe on a 3 blader would be expensive , but i also love the looks of that catto prop . From: Hans Christian Erstad To: "kis-list@matronics.com" , Date: 09/02/2014 10:52 AM Subject: Re: KIS-List: My new propeller shipped today. Sent by: owner-kis-list-server@matronics.com Yes,it look AWESOME! Keep us updated on how it performs. I have been thinking about a new propeller for my TR-1, with finer pitch than I have now. May I ask now much $ Cattoneedto make one? Hans Christian 2014-09-02 3:05 GMT+02:00 Galin Hernandez : Here are two photos of my new CATTO 3 bladed composite propeller that shipped today. The propeller tips are painted the same color as the tail number. I think it looks AWESOME! Now let's see how it performs. This message and any attachments are intended for the use of the addressee or addressees only. The unauthorised disclosure, use, dissemination or copying (either in whole or in part) of its content is not permitted. If you received this message in error, please notify the sender and delete it from your system. Emails can be altered and their integrity cannot be guaranteed by the sender. Please consider the environment before printing this email. ________________________________ Message 3 _____________________________________ Time: 02:49:17 AM PST US Subject: Re: KIS-List: My new propeller shipped today. From: Hans Christian Erstad Keith. Yes, the shipping is expensive and the sales tax (25%) is expensive! That is why I transported my current Prince propeller as hand luggage on a flight from the US. And through customs I pretended it was part of my personal belongings (camouflaged as skies) :-) I have to be really creative living in this part of the world. Hans Christian 2014-09-02 11:09 GMT+02:00 : > > Hans , i suspect shipping from the USA to Europe on a 3 blader would be > expensive , but i also love the looks of that catto prop . > > > From: Hans Christian Erstad > To: "kis-list@matronics.com" , > Date: 09/02/2014 10:52 AM > Subject: Re: KIS-List: My new propeller shipped today. > Sent by: owner-kis-list-server@matronics.com > > > Yes, it look AWESOME! > Keep us updated on how it performs. > I have been thinking about a new propeller for my TR-1, with finer pitch > than > I have now. May I ask now much $ Catto need to make one? > > Hans Christian > > > 2014-09-02 3:05 GMT+02:00 Galin Hernandez : > Here are two photos of my new CATTO 3 bladed composite propeller that > shipped today. The propeller tips are painted the same color as the tail > number. I think it looks AWESOME! > > Now let's see how it performs. > > > This message and any attachments are intended for the use of the addressee > or addressees only. > The unauthorised disclosure, use, dissemination or copying (either in > whole or in part) of its > content is not permitted. > If you received this message in error, please notify the sender and delete > it from your system. > Emails can be altered and their integrity cannot be guaranteed by the > sender. > > Please consider the environment before printing this email. > > ________________________________ Message 4 _____________________________________ Time: 04:07:41 AM PST US Subject: Re: KIS-List: My new propeller shipped today. From: Keith.Miller@esa.int Hans not sure what you can disguise a 3 bladed prop as ? any suggestions ? From: Hans Christian Erstad To: "kis-list@matronics.com" , Date: 09/02/2014 11:50 AM Subject: Re: KIS-List: My new propeller shipped today. Sent by: owner-kis-list-server@matronics.com Keith. Yes, the shipping is expensive and the sales tax (25%) is expensive! That is why I transported my currentPrince propeller as hand luggage on a flight from the US. And through customs I pretended it waspart of my personal belongings (camouflaged as skies) :-) I have to be really creative livingin this part of the world. Hans Christian 2014-09-02 11:09 GMT+02:00 : Hans , i suspect shipping from the USA to Europe on a 3 blader would be expensive , but i also love the looks of that catto prop . From: Hans Christian Erstad To: "kis-list@matronics.com" , Date: 09/02/2014 10:52 AM Subject: Re: KIS-List: My new propeller shipped today. Sent by: owner-kis-list-server@matronics.com Yes,it look AWESOME! Keep us updated on how it performs. I have been thinking about a new propeller for my TR-1, with finer pitch than I have now. May I ask now much $ Cattoneedto make one? Hans Christian 2014-09-02 3:05 GMT+02:00 Galin Hernandez : Here are two photos of my new CATTO 3 bladed composite propeller that shipped today. The propeller tips are painted the same color as the tail number. I think it looks AWESOME! Now let's see how it performs. This message and any attachments are intended for the use of the addressee or addressees only. The unauthorised disclosure, use, dissemination or copying (either in whole or in part) of its content is not permitted. If you received this message in error, please notify the sender and delete it from your system. Emails can be altered and their integrity cannot be guaranteed by the sender. Please consider the environment before printing this email. ========== List" target="_blank">http://www.matronics.com/Navigator?KIS-List ========== FORUMS - _blank">http://forums.matronics.com ========== b Site - -Matt Dralle, List Admin. target="_blank">http://www.matronics.com/contribution ========== This message and any attachments are intended for the use of the addressee or addressees only. The unauthorised disclosure, use, dissemination or copying (either in whole or in part) of its content is not permitted. If you received this message in error, please notify the sender and delete it from your system. Emails can be altered and their integrity cannot be guaranteed by the sender. Please consider the environment before printing this email. ________________________________ Message 5 _____________________________________ Time: 04:48:58 AM PST US Subject: Re: KIS-List: My new propeller shipped today. From: Hans Christian Erstad Put it in a big hat box? People also check in their bicycles, maybe pretend it is a bicycle wheel? I agree 3 blades is more difficult than 2 :-) 2014-09-02 13:06 GMT+02:00 : > > Hans > > not sure what you can disguise a 3 bladed prop as ? any suggestions ? > > > From: Hans Christian Erstad > To: "kis-list@matronics.com" , > Date: 09/02/2014 11:50 AM > Subject: Re: KIS-List: My new propeller shipped today. > Sent by: owner-kis-list-server@matronics.com > > > Keith. Yes, the shipping is expensive and the sales tax (25%) is expensive! > That is why I transported my current Prince propeller as hand luggage on a > flight from the US. And through customs I pretended it was part of my > personal belongings (camouflaged as skies) :-) I have to be really > creative > living in this part of the world. > > Hans Christian > > > 2014-09-02 11:09 GMT+02:00 : > > Hans , i suspect shipping from the USA to Europe on a 3 blader would be > expensive , but i also love the looks of that catto prop . > > > From: Hans Christian Erstad > To: "kis-list@matronics.com" , > Date: 09/02/2014 10:52 AM > Subject: Re: KIS-List: My new propeller shipped today. > Sent by: owner-kis-list-server@matronics.com > > > Yes, it look AWESOME! > Keep us updated on how it performs. > I have been thinking about a new propeller for my TR-1, with finer pitch > than > I have now. May I ask now much $ Catto need to make one? > > Hans Christian > > > 2014-09-02 3:05 GMT+02:00 Galin Hernandez : > Here are two photos of my new CATTO 3 bladed composite propeller that > shipped today. The propeller tips are painted the same color as the > tail > number. I think it looks AWESOME! > > Now let's see how it performs. > > > This message and any attachments are intended for the use of the > addressee > or addressees only. > The unauthorised disclosure, use, dissemination or copying (either in > whole > or in part) of its > content is not permitted. > If you received this message in error, please notify the sender and > delete > it from your system. > Emails can be altered and their integrity cannot be guaranteed by the > sender. > > Please consider the environment before printing this email. > > > ========== > List" target="_blank">http://www.matronics.com/Navigator?KIS-List > ========== > FORUMS - > _blank">http://forums.matronics.com > ========== > b Site - > -Matt Dralle, List Admin. > target="_blank">http://www.matronics.com/contribution > ========== > > > This message and any attachments are intended for the use of the addressee > or addressees only. > The unauthorised disclosure, use, dissemination or copying (either in > whole or in part) of its > content is not permitted. > If you received this message in error, please notify the sender and delete > it from your system. > Emails can be altered and their integrity cannot be guaranteed by the > sender. > > Please consider the environment before printing this email. > > ________________________________ Message 6 _____________________________________ Time: 05:18:54 AM PST US From: Galin Hernandez Subject: Re: KIS-List: My new propeller shipped today. Hans; I had them include the nickel leading edges, the spinner and since they don't have copper as an available color, it included the custom tip color. There is a 4 month delivery time but I paid for the 4 week delivery option. This brought the total price to $5,000.00US. http://www.cattoprops.com/ Galin On Tue, Sep 2, 2014 at 4:49 AM, Hans Christian Erstad wrote: > Yes, it look AWESOME! > Keep us updated on how it performs. > I have been thinking about a new propeller for my TR-1, with finer pitch > than I have now. May I ask now much $ Catto need to make one? > > Hans Christian > > > 2014-09-02 3:05 GMT+02:00 Galin Hernandez : > > Here are two photos of my new CATTO 3 bladed composite propeller that >> shipped today. The propeller tips are painted the same color as the tail >> number. I think it looks AWESOME! >> >> Now let's see how it performs. >> > > * > > > * > > ________________________________ Message 7 _____________________________________ Time: 07:48:08 AM PST US Subject: Re: KIS-List: My new propeller shipped today. From: Scott Stearns Tell them it is a fake propeller just for wall art in your house! > On Sep 2, 2014, at 5:06 AM, Keith.Miller@esa.int wrote: > > > Hans > > not sure what you can disguise a 3 bladed prop as ? any suggestions ? > > > > From: Hans Christian Erstad > To: "kis-list@matronics.com" , > Date: 09/02/2014 11:50 AM > Subject: Re: KIS-List: My new propeller shipped today. > Sent by: owner-kis-list-server@matronics.com > > > > Keith. Yes, the shipping is expensive and the sales tax (25%) is expensive! > That is why I transported my current Prince propeller as hand luggage on a > flight from the US. And through customs I pretended it was part of my > personal belongings (camouflaged as skies) :-) I have to be really creative > living in this part of the world. > > Hans Christian > > > 2014-09-02 11:09 GMT+02:00 : > > Hans , i suspect shipping from the USA to Europe on a 3 blader would be > expensive , but i also love the looks of that catto prop . > > > > From: Hans Christian Erstad > To: "kis-list@matronics.com" , > Date: 09/02/2014 10:52 AM > Subject: Re: KIS-List: My new propeller shipped today. > Sent by: owner-kis-list-server@matronics.com > > > > Yes, it look AWESOME! > Keep us updated on how it performs. > I have been thinking about a new propeller for my TR-1, with finer pitch > than > I have now. May I ask now much $ Catto need to make one? > > Hans Christian > > > 2014-09-02 3:05 GMT+02:00 Galin Hernandez : > Here are two photos of my new CATTO 3 bladed composite propeller that > shipped today. The propeller tips are painted the same color as the tail > number. I think it looks AWESOME! > > Now let's see how it performs. > > > > > > > > This message and any attachments are intended for the use of the addressee > or addressees only. > The unauthorised disclosure, use, dissemination or copying (either in whole > or in part) of its > content is not permitted. > If you received this message in error, please notify the sender and delete > it from your system. > Emails can be altered and their integrity cannot be guaranteed by the > sender. > > Please consider the environment before printing this email. > > > > ========== > List" target="_blank">http://www.matronics.com/Navigator?KIS-List > ========== > FORUMS - > _blank">http://forums.matronics.com > ========== > b Site - > -Matt Dralle, List Admin. > target="_blank">http://www.matronics.com/contribution > ========== > > > > > > > > > > > This message and any attachments are intended for the use of the addressee or addressees only. > The unauthorised disclosure, use, dissemination or copying (either in whole or in part) of its > content is not permitted. > If you received this message in error, please notify the sender and delete it from your system. > Emails can be altered and their integrity cannot be guaranteed by the sender. > > Please consider the environment before printing this email. > > > > > > ________________________________ Message 8 _____________________________________ Time: 12:37:22 PM PST US From: Mark Kettering Subject: Re: KIS-List: My new propeller shipped today. Instead of a new finer pitched prop have you thought about trimming a little off the ends? In the past I had an Ed Sturba prop for my TR-1 that was a little too much pitch so I trimmed 1/2 inch off of each tip. This made a noticeable difference but I still wanted a little more RPM so I did it again for a total of 1 inch off each blade. This made it a perfect match for my engine/aircraft. I left the ends square. In reality square ends are better than most curved ends. Look at the Mooney wings tips for an example. Mark -----Original Message----- From: Hans Christian Erstad Sent: Sep 2, 2014 4:49 AM Subject: Re: KIS-List: My new propeller shipped today. Yes, it look AWESOME!Keep us updated on how it performs.I have been thinking about a new propeller for my TR-1, with finer pitch than I have now. May I ask now much $ Catto need to make one? Hans Christian 2014-09-02 3:05 GMT+02:00 Galin Hernandez : Here are two photos of my new CATTO 3 bladed composite propeller that shipped today. The propeller tips are painted the same color as the tail number. I think it looks AWESOME! Now let's see how it performs. ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kis-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/KIS-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kis-list Browse Digests http://www.matronics.com/digest/kis-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.