---------------------------------------------------------- KIS-List Digest Archive --- Total Messages Posted Mon 09/22/14: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:43 PM - KIS TR-4 Spinner (fasilpereira) 2. 01:44 PM - KIS TR-4 Spinner (fasilpereira) 3. 04:53 PM - Re: KIS TR-4 Spinner (Tim Yoder) ________________________________ Message 1 _____________________________________ Time: 01:43:39 PM PST US Subject: KIS-List: KIS TR-4 Spinner From: "fasilpereira" Does anybody knows what is the correct Spinner diameter to fit on a Kis tr-4 cowling with rectangular air intake? I'm thinking on buying a Vans RV standard fiberglass Spinner, but don't know if it will fit. Thanks, Fabricio -------- Fabricio Pereira Engineer / Pilot Read this topic online here: http://forums.matronics.com/viewtopic.php?p=430928#430928 ________________________________ Message 2 _____________________________________ Time: 01:44:22 PM PST US Subject: KIS-List: KIS TR-4 Spinner From: "fasilpereira" Does anybody knows what is the correct Spinner diameter to fit on a Kis tr-4 cowling with rectangular air intake? I'm thinking on buying a Vans RV standard fiberglass Spinner, but don't know if it will fit. Thanks, Fabricio -------- Fabricio Pereira Engineer / Pilot Read this topic online here: http://forums.matronics.com/viewtopic.php?p=430929#430929 ________________________________ Message 3 _____________________________________ Time: 04:53:20 PM PST US From: "Tim Yoder" Subject: RE: KIS-List: KIS TR-4 Spinner I have a TR-1 and it is a little over 10" I think. You can start by measuring the cowl face width and height to get an idea. Is the engine mounted, if so, with new mounts? They sag with age, 7 to 10 years is usually the max life. If the engine is in, measure from the center of the prop flange to the top of the cowl. That is where you probably want the spinner to be flush or 1/8" high with new motor mounts. Once you know the diameter you can look at the options in Aircraft Spruce for a stile you like. It will take some work, you need to have a prop so you know the its thickness to get the proper front bulkhead. Tim -----Original Message----- From: owner-kis-list-server@matronics.com [mailto:owner-kis-list-server@matronics.com] On Behalf Of fasilpereira Sent: Monday, September 22, 2014 1:44 PM Subject: KIS-List: KIS TR-4 Spinner Does anybody knows what is the correct Spinner diameter to fit on a Kis tr-4 cowling with rectangular air intake? I'm thinking on buying a Vans RV standard fiberglass Spinner, but don't know if it will fit. Thanks, Fabricio -------- Fabricio Pereira Engineer / Pilot Read this topic online here: http://forums.matronics.com/viewtopic.php?p=430929#430929 --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kis-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/KIS-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kis-list Browse Digests http://www.matronics.com/digest/kis-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.