---------------------------------------------------------- KIS-List Digest Archive --- Total Messages Posted Tue 09/23/14: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:35 AM - Re: KIS TR-4 Spinner (Galin Hernandez) 2. 07:55 AM - Re: KIS TR-4 Spinner (Mike Pienaar) 3. 07:56 AM - Static port (Mike Pienaar) 4. 09:08 AM - Re: Static port (Galin Hernandez) 5. 09:41 AM - Re: Static port (Kent Pyle) 6. 01:14 PM - Re: KIS TR-4 Spinner (fasilpereira) 7. 05:33 PM - Re: KIS TR-4 Spinner (Ed Hanson) ________________________________ Message 1 _____________________________________ Time: 04:35:04 AM PST US From: Galin Hernandez Subject: Re: KIS-List: KIS TR-4 Spinner FWIW I have a 12" spinner on my KIS TR-4. On Mon, Sep 22, 2014 at 7:54 PM, Tim Yoder wrote: > > I have a TR-1 and it is a little over 10" I think. You can start by > measuring the cowl face width and height to get an idea. Is the engine > mounted, if so, with new mounts? They sag with age, 7 to 10 years is > usually > the max life. If the engine is in, measure from the center of the prop > flange to the top of the cowl. That is where you probably want the spinner > to be flush or 1/8" high with new motor mounts. Once you know the diameter > you can look at the options in Aircraft Spruce for a stile you like. It > will > take some work, you need to have a prop so you know the its thickness to > get > the proper front bulkhead. > > Tim > > -----Original Message----- > From: owner-kis-list-server@matronics.com > [mailto:owner-kis-list-server@matronics.com] On Behalf Of fasilpereira > Sent: Monday, September 22, 2014 1:44 PM > To: kis-list@matronics.com > Subject: KIS-List: KIS TR-4 Spinner > > > Does anybody knows what is the correct Spinner diameter to fit on a Kis > tr-4 > cowling with rectangular air intake? > I'm thinking on buying a Vans RV standard fiberglass Spinner, but don't > know > if it will fit. > > Thanks, > > Fabricio > > -------- > Fabricio Pereira > Engineer / Pilot > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=430929#430929 > > > --- > This email is free from viruses and malware because avast! Antivirus > protection is active. > http://www.avast.com > > ________________________________ Message 2 _____________________________________ Time: 07:55:36 AM PST US From: "Mike Pienaar" Subject: Re: KIS-List: KIS TR-4 Spinner Fabricio I have the spinner that came with my kit that I am not using so you can have that if you need it Thanks Mike ----- Original Message ----- From: "fasilpereira" Sent: Monday, September 22, 2014 1:43 PM Subject: KIS-List: KIS TR-4 Spinner > > Does anybody knows what is the correct Spinner diameter to fit on a Kis > tr-4 cowling with rectangular air intake? > I'm thinking on buying a Vans RV standard fiberglass Spinner, but don't > know if it will fit. > > Thanks, > > Fabricio > > -------- > Fabricio Pereira > Engineer / Pilot > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=430928#430928 > > > ________________________________ Message 3 _____________________________________ Time: 07:56:48 AM PST US From: "Mike Pienaar" Subject: KIS-List: Static port Where is a good place to put the static port on the TR4 Thanks Mike ________________________________ Message 4 _____________________________________ Time: 09:08:29 AM PST US Subject: Re: KIS-List: Static port From: Galin Hernandez Mine are (2) right behind the real seats on each side of the fuselage. No matter where you wind up putting it, make sure you verify the accuracy at different airspeeds. I will get pictures of the install when I get back home next week. On Tuesday, September 23, 2014, Mike Pienaar wrote: > > Where is a good place to put the static port on the TR4 > > Thanks > Mike > > ________________________________ Message 5 _____________________________________ Time: 09:41:25 AM PST US From: "Kent Pyle" Subject: Re: KIS-List: Static port Mine are part of the pitot tube. Kent From: Galin Hernandez Sent: Tuesday, September 23, 2014 11:08 AM Subject: Re: KIS-List: Static port Mine are (2) right behind the real seats on each side of the fuselage. No matter where you wind up putting it, make sure you verify the accuracy at different airspeeds. I will get pictures of the install when I get back home next week. On Tuesday, September 23, 2014, Mike Pienaar wrote: Where is a good place to put the static port on the TR4 Thanks Mike List" target="_blank">http://www.matronics.com/Navigator?KIS-List FORUMS - _blank">http://forums.matronics.com b Site - -Matt Dralle, List Admin. target="_blank">http://www.matronics.com/contribution ________________________________ Message 6 _____________________________________ Time: 01:14:21 PM PST US Subject: KIS-List: Re: KIS TR-4 Spinner From: "fasilpereira" Hi guys, first please apologize for the duplicate message. I've sent it via Mobile Phone and don't know why that happened. Galin, thanks for sending your spinner dimensions. I'll measure my cowling and check it 12" will make a nice fit. Mike, I'll send an email to you about your KIS spinner. Best regards, Fabricio -------- Fabricio Pereira Engineer / Pilot Read this topic online here: http://forums.matronics.com/viewtopic.php?p=430987#430987 ________________________________ Message 7 _____________________________________ Time: 05:33:46 PM PST US From: "Ed Hanson" Subject: Re: KIS-List: KIS TR-4 Spinner I purchased an aluminum spinner from Spruce. 12-1/16" diameter BN-3 part #0060, Forward facing flange #05-00585, 1/16" Prop spacer #10055-1,ACS machine fee 05-04904, High polish finish. Total amount was $396. The Spruce vendor's phone is 928-855-8613. Talk to Valerie. I would buy it again. Happy building. ----- Original Message ----- From: "fasilpereira" Sent: Monday, September 22, 2014 3:43 PM Subject: KIS-List: KIS TR-4 Spinner > > Does anybody knows what is the correct Spinner diameter to fit on a Kis > tr-4 cowling with rectangular air intake? > I'm thinking on buying a Vans RV standard fiberglass Spinner, but don't > know if it will fit. > > Thanks, > > Fabricio > > -------- > Fabricio Pereira > Engineer / Pilot > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=430928#430928 > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kis-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/KIS-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kis-list Browse Digests http://www.matronics.com/digest/kis-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.