Today's Message Index:
----------------------
1. 05:08 PM - Landing Gear Progress (Galin Hernandez)
2. 05:58 PM - Re: Landing Gear Progress (Tim Yoder)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Landing Gear Progress |
I FINALLY "finished" sanding the affected area. Sanding fiberglass inside
an airplane in 90+ degree weather is no fun. I have reamed out the brackets
to use AN7 instead of AN6 bolts and have cut the 3/16" thick steel plates
that will go on top of the layup. My landing gear is stripped of all paint
and is ready for a new paint job. I also hope to receive the rubber padding
soon.
Hopefully I can get somebody to check the sanded area, do the actual
repairs/layups so I can get her back in the air.
Too be continued...
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Landing Gear Progress |
Sounds like good progress!
_____
From: owner-kis-list-server@matronics.com
[mailto:owner-kis-list-server@matronics.com] On Behalf Of Galin Hernandez
Sent: Saturday, June 13, 2015 5:08 PM
Subject: KIS-List: Landing Gear Progress
I FINALLY "finished" sanding the affected area. Sanding fiberglass inside an
airplane in 90+ degree weather is no fun. I have reamed out the brackets to
use AN7 instead of AN6 bolts and have cut the 3/16" thick steel plates that
will go on top of the layup. My landing gear is stripped of all paint and is
ready for a new paint job. I also hope to receive the rubber padding soon.
Hopefully I can get somebody to check the sanded area, do the actual
repairs/layups so I can get her back in the air.
Too be continued...
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|