---------------------------------------------------------- KIS-List Digest Archive --- Total Messages Posted Sat 07/18/15: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:53 AM - KIS TR-1 Elevator Horn Access (Owen Baker) 2. 01:07 PM - Re: KIS TR-1 Elevator Horn Access (Kent Pyle) ________________________________ Message 1 _____________________________________ Time: 07:53:09 AM PST US From: "Owen Baker " Subject: KIS-List: KIS TR-1 Elevator Horn Access 7/18/2015 Hello Kent Pyle, 1) Keith Miller wrote: "OC question , what is the access panel below the horizontal stabilizer used for ?" 2) Kent Pyle wrote: "Elevator horn. Kent" 3) 'OC" Baker wrote: "I did not run my rudder cables all the way to the rudder horn which would have required having one of the cables to exit the fuselage side in order to connect to the rudder horn. Instead I created a bell crank mounted internally at the rear end of the fuselage that the rudder cables connected to. Then I ran a pushrod internally to connect to a modified rudder horn from that bell crank. Makes for a much neater, entirely internal, arrangement. The access panel below the horizontal stabilizer gives me access to the bell crank and the rudder cables and rudder push rod connections." 4) My recollection is that the elevator horn is well aft of the access panel in question and is attached directly to the aft side of the elevator spar. The access to the connection between the aft end of the elevator push rod and the elevator horn is through the triangular openings on both sides of the aft end of the fuselage. Concur? OC ======================================================= From: Kent Pyle Sent: Friday, July 17, 2015 7:36 PM Subject: Re: KIS-List: KIS Designations Elevator horn. Kent =================================================== From: Keith.Miller@esa.int Sent: Friday, July 10, 2015 2:49 AM Subject: Re: KIS-List: KIS Designations Rob Internet explorer 8 works (just ) .....but i thought OC had a real KIS not a Pulsar Sport 150 !!! ( only joking OC/ Mark - don't react !!!) OC question , what is the access panel below the horizontal stabilizer used for ? Keith ( 525hrs on KIS2 ) ________________________________ Message 2 _____________________________________ Time: 01:07:30 PM PST US From: "Kent Pyle" Subject: Re: KIS-List: KIS TR-1 Elevator Horn Access That is the way I did it as well. My flippant answer was too short and not helpful. Kent -----Original Message----- From: Owen Baker Sent: Saturday, July 18, 2015 9:52 AM Subject: KIS-List: KIS TR-1 Elevator Horn Access 7/18/2015 Hello Kent Pyle, 1) Keith Miller wrote: "OC question , what is the access panel below the horizontal stabilizer used for ?" 2) Kent Pyle wrote: "Elevator horn. Kent" 3) 'OC" Baker wrote: "I did not run my rudder cables all the way to the rudder horn which would have required having one of the cables to exit the fuselage side in order to connect to the rudder horn. Instead I created a bell crank mounted internally at the rear end of the fuselage that the rudder cables connected to. Then I ran a pushrod internally to connect to a modified rudder horn from that bell crank. Makes for a much neater, entirely internal, arrangement. The access panel below the horizontal stabilizer gives me access to the bell crank and the rudder cables and rudder push rod connections." 4) My recollection is that the elevator horn is well aft of the access panel in question and is attached directly to the aft side of the elevator spar. The access to the connection between the aft end of the elevator push rod and the elevator horn is through the triangular openings on both sides of the aft end of the fuselage. Concur? OC ======================================================= From: Kent Pyle Sent: Friday, July 17, 2015 7:36 PM Subject: Re: KIS-List: KIS Designations Elevator horn. Kent =================================================== From: Keith.Miller@esa.int Sent: Friday, July 10, 2015 2:49 AM Subject: Re: KIS-List: KIS Designations Rob Internet explorer 8 works (just ) .....but i thought OC had a real KIS not a Pulsar Sport 150 !!! ( only joking OC/ Mark - don't react !!!) OC question , what is the access panel below the horizontal stabilizer used for ? Keith ( 525hrs on KIS2 ) ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kis-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/KIS-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kis-list Browse Digests http://www.matronics.com/digest/kis-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.