Today's Message Index:
----------------------
1. 05:04 AM - Firewall (mike)
2. 05:18 AM - Re: Firewall (Bill Schertz)
3. 05:32 AM - Re: Firewall (M Ketteing)
4. 09:21 AM - Re: Firewall (Scott Stearns)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
> Hi All
>
I'm in the process of installing the stainless steel firewall, should I seal the
edge and if yes what do I use?
Thanks
Mike
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Mike
I assume that you put the fiberfrax between the plywood and the SS
sheet. One thing that I did that I am very happy with is to put a large
metal washer at each point where something is attached to the firewall,
with a cutout of the fiberfrax around the washer to prevent the
compression and buckling of the SS sheet when the items are tightened
down. A high temp (red) RTV could work to seal the edges.
Bill
From: mike
Sent: Tuesday, February 02, 2016 6:03 AM
Subject: KIS-List: Firewall
Hi All
I'm in the process of installing the stainless steel firewall, should I
seal the edge and if yes what do I use?
Thanks
Mike
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Hi Mike,
Before you install the stainless steel you may also want to paint the firewall
with intumescent paint. You can buy this type of fireproof paint on ebay and
many places online. You may also want to paint the inside of your cowling with
this paint.
You can use DAP Firestop silicone to seal any firewall penetrations and the edge
of the stainless. You should be able to get this at Lowes or Homedepot. I assume
you are using fiberfrax or similar behind the stainless.
Mark Kettering
--------------------------------------------
On Tue, 2/2/16, mike <mike@vision499.com> wrote:
Subject: KIS-List: Firewall
To: kis-list@matronics.com
Date: Tuesday, February 2, 2016, 8:03 AM
#yiv2888674618
.yiv2888674618mceResizeHandle {position:absolute;border:1px
solid
black;background:#FFF;width:5px;height:5px;z-index:10000;}#yiv2888674618
.yiv2888674618mceResizeHandle:hover
{background:#000;}#yiv2888674618 img .filtered99999
{outline:1px solid black;}#yiv2888674618
img.yiv2888674618mceClonedResizable, #yiv2888674618
table.yiv2888674618mceClonedResizable
{position:absolute;outline:1px dashed black;z-index:10000;}
Hi All
I'm in the process of installing the stainless steel
firewall, should I seal the edge and if yes what do I
use?
Thanks
Mike
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
I did exactly the same thing. =C2-Large area washers behind the big bolts
and normal washers behind the small bots. =C2-I bonded the washers on wi
th the fiberfrax adhesive and I have 4 ply pads on the front of the firewal
l in the engine mount attach areas.
If I did it again I would make very large washers, maybe 2" in diameter, to
use under the engine mount attach bolts. =C2-=C2-
I used red RTV around the edge of the firewall. =C2-
I also plan to coat the inside of my cowl with this...
http://www.homedepot.com/p/ForceField-FireGuard-E-84-5-gal-Intumescent-Prim
er-FFGD-E84-g05/203582028?cm_mmc=shopping-_-googleads-_-pla-_-203582028&c
i_sku 3582028&ci_gpa=pla&ci_src=17588969&gclid=CKmZ5srE2coCFUOVfg
od4nkGtQ&gclsrc=aw.ds
It is a primer coat, but it expands when exposed to flame to form a thick i
nsulation. =C2- There are some very impressive videos on you tube. =C2-
I would also put a couple coats on the firewall and maybe on the underside
of the forward fuselage where the cooling air comes out. =C2-=C2-
Scott
Hi All
I'm in the process of installing the stainless steel firewall, should I sea
l the edge and if yes what do I use?=C2-Thanks=C2-Mike
#yiv9330359423 .yiv9330359423mceResizeHandle {position:absolute;border:1
px solid black;background:#FFF;width:5px;height:5px;z-index:10000;}#yiv9330
359423 .yiv9330359423mceResizeHandle:hover {background:#000;}#yiv9330359423
img .filtered99999 {outline:1px solid black;}#yiv9330359423 img.yiv9330359
423mceClonedResizable, #yiv9330359423 table.yiv9330359423mceClonedResizable
{position:absolute;outline:1px dashed black;z-index:10000;}
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|