---------------------------------------------------------- KIS-List Digest Archive --- Total Messages Posted Mon 04/04/16: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 11:29 AM - fairing ? (Alfred Rosa) 2. 11:48 AM - wing fairings ? (Alfred Rosa) 3. 12:50 PM - Re: fairing ? (Scott Stearns) 4. 02:25 PM - Re: fairing ? (Robert Reed) 5. 02:37 PM - Re: fairing ? (Alfred Rosa) ________________________________ Message 1 _____________________________________ Time: 11:29:36 AM PST US Subject: KIS-List: fairing ? From: Alfred Rosa Hi all, I'm in the process of installing wing fairings on the Cruiser. The top fairing is self explanatory but I don't know what to do with the two fairing shapes left over. Can anyone tell me what these are and where they go. Also, since the manual doesn't give much info on the bottom fairings can someone provide a picture how they handled that? Al Rosa ________________________________ Message 2 _____________________________________ Time: 11:48:57 AM PST US Subject: KIS-List: wing fairings ? From: Alfred Rosa Hi all, I'm in the process of installing wing fairings on the Cruiser. The top fairing is self explanatory but I don't know what to do with the two fairing shapes left over. Can anyone tell me what these are and where they go. Also, since the manual doesn't give much info on the bottom fairings can someone provide a picture how they handled that? Al Rosa ________________________________ Message 3 _____________________________________ Time: 12:50:01 PM PST US From: Scott Stearns Subject: Re: KIS-List: fairing ? Hi Al, The fairings in the picture are for the aft wing root area. =C2-The flap fits in the triangular area. =C2-There should be a top and bottom. For the bottom wing root fairing on my TR-1 did a three ply release off the bottom of the wing and trimmed it to cover the bottom wing root area. =C2 - I was planning to do the same on the TR-4. =C2- Maybe the kits came with a part like that and I just haven't seen one. Scott From: Alfred Rosa To: kisbuilders Sent: Monday, April 4, 2016 11:28 AM Subject: KIS-List: fairing ? Hi all, =C2-I'm in the process of installing wing fairings on the Cruiser .The top fairing is self explanatory but I don't know what to do with the t wo fairingshapes left over.Can anyone tell me what these are and where they go.=C2- Also, since the manual doesn't give much info on the bottom fair ings can someone provide a picture how they handled that? Al Rosa ________________________________ Message 4 _____________________________________ Time: 02:25:42 PM PST US From: Robert Reed Subject: Re: KIS-List: fairing ? Al, The assembly shown is the bottom fairing which matches up to the top fairing at the back. The flat edge bonds to the underside of upper fairing and the curve mates to the upper fairing. There are some photos on my website in the Pre-assembly wing section. They aren't great shots but hopefully will give you an idea. Bob Reed Sent from my iPad > On Apr 4, 2016, at 1:28 PM, Alfred Rosa wrote: > > Hi all, I'm in the process of installing wing fairings on the Cruiser. > The top fairing is self explanatory but I don't know what to do with the two fairing > shapes left over. > Can anyone tell me what these are and where they go. Also, since the manual doesn't give much info on the bottom fairings can someone provide a picture how they handled that? > > Al Rosa > ________________________________ Message 5 _____________________________________ Time: 02:37:19 PM PST US Subject: Re: KIS-List: fairing ? From: Alfred Rosa Thanks Bob. That makes sense. I'll check your web site. What stage are you at? Sent from my iPhone > On Apr 4, 2016, at 5:25 PM, Robert Reed wrote: > > > Al, > > The assembly shown is the bottom fairing which matches up to the top fairing at the back. The flat edge bonds to the underside of upper fairing and the curve mates to the upper fairing. There are some photos on my website in the Pre-assembly wing section. They aren't great shots but hopefully will give you an idea. > > Bob Reed > > Sent from my iPad > >> On Apr 4, 2016, at 1:28 PM, Alfred Rosa wrote: >> >> Hi all, I'm in the process of installing wing fairings on the Cruiser. >> The top fairing is self explanatory but I don't know what to do with the two fairing >> shapes left over. >> Can anyone tell me what these are and where they go. Also, since the manual doesn't give much info on the bottom fairings can someone provide a picture how they handled that? >> >> Al Rosa >> > > > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kis-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/KIS-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kis-list Browse Digests http://www.matronics.com/digest/kis-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.