Today's Message Index:
----------------------
1. 07:58 AM - SPRAYBOOTH (mike)
2. 08:01 AM - PAINT RESULT (mike)
3. 08:07 AM - LANDING GEAR (mike)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Hi All,
I have attached photo's of the spraybooth I set up in the hangar made of 2x4's
and 6 mil plastic sheeting. The extractor is made from an old fan and the filter
material is 2 inch thick batting that I found at a local fabric store, it
stopped everything and lasted a long time and was cheap.
I used Stewart systems water based paint. Generally it worked well but was
expensive and as somebody said it is very temperamental. I used a water based
paint as I started in a friend's basement and did not want to risk anything that
is flammable. I recently helped a friend who is using non waterbased auto finish
and it is much easier to get a good finish.
Even after color sanding in certain areas I cannot get a deep shine.
Keep well
Mike
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
I have attached a photo of my cowling painted with Stewart Systems water based
paint.
The violet and yellow is metallic without a clear coat.
Mike
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
I have attached a photo of my landing gear bolt attachment reinforcement.
It is an aluminum washer that is cut at the same angle as the support pad for
the landing gear so that the bolts will 90 degrees.
I drilled holes ihe bottom of the washer
Mike
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|