---------------------------------------------------------- KIS-List Digest Archive --- Total Messages Posted Wed 01/18/17: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:21 AM - Re: King Radio KY97A (Keith.Miller@esa.int) 2. 07:30 AM - Re: King Radio KY97A (Galin Hernandez) 3. 12:31 PM - Re: Lens for landing light? (Ed Hanson) ________________________________ Message 1 _____________________________________ Time: 12:21:55 AM PST US Subject: Re: KIS-List: King Radio KY97A From: Keith.Miller@esa.int Galin That's unfortunate for me !!, I should have posted this a few weeks ago, as I have already got my 8.33Khz radio (TRIG), and started the installation. But thanks for the offer, it certainly would have been a cheaper option From: Galin Hernandez To: "kis-list@matronics.com" Date: 01/17/2017 05:31 PM Subject: Re: KIS-List: King Radio KY97A Sent by: owner-kis-list-server@matronics.com PS, the SN of my unit is: 2504099 On Tue, Jan 17, 2017 at 7:35 AM, wrote: Due to some stupid legislation being introduced in Europe, requiring that all radios are 8.33KHz spacing instead of 25KHz spacing , i am having to replace my perfectly good and working King KY97A TSO radio ( S/N U16992 ) ( 14volts ) in the KIS with another perfectly good and working radio , with the correct format. If anyone wants my radio at a rock bottom price of 600$ ( includes shipping , the tray, original installation manual and the wiring harness for a typical installation connected to an Intercom ) let me know before it goes on EBay . It is in perfect working condition (no scratches ) Keith This message and any attachments are intended for the use of the addressee or addressees only. The unauthorised disclosure, use, dissemination or copying (either in whole or in part) of its content is not permitted. If you received this message in error, please notify the sender and delete it from your system. Emails can be altered and their integrity cannot be guaranteed by the sender. Please consider the environment before printing this email. =================================== List" target="_blank" rel="noreferrer"> http://www.matronics.com/Navigator?KIS-List =================================== FORUMS - _blank" rel="noreferrer">http://forums.matronics.com =================================== WIKI - lank" rel="noreferrer">http://wiki.matronics.com =================================== b Site - -Matt Dralle, List Admin. target="_blank" rel="noreferrer">http://www.matronics.com/contribution =================================== This message and any attachments are intended for the use of the addressee or addressees only. The unauthorised disclosure, use, dissemination or copying (either in whole or in part) of its content is not permitted. If you received this message in error, please notify the sender and delete it from your system. Emails can be altered and their integrity cannot be guaranteed by the sender. Please consider the environment before printing this email. This message and any attachments are intended for the use of the addressee or addressees only. The unauthorised disclosure, use, dissemination or copying (either in whole or in part) of its content is not permitted. If you received this message in error, please notify the sender and delete it from your system. Emails can be altered and their integrity cannot be guaranteed by the sender. Please consider the environment before printing this email. ________________________________ Message 2 _____________________________________ Time: 07:30:50 AM PST US From: Galin Hernandez Subject: Re: KIS-List: King Radio KY97A No problem. Things like this come up all the time. On Wed, Jan 18, 2017 at 3:21 AM, wrote: > > Galin > That's unfortunate for me !!, I should have posted this a few weeks ago, > as > I have already got my 8.33Khz radio (TRIG), and started the installation. > > But thanks for the offer, it certainly would have been a cheaper option > > > From: Galin Hernandez > To: "kis-list@matronics.com" > Date: 01/17/2017 05:31 PM > Subject: Re: KIS-List: King Radio KY97A > Sent by: owner-kis-list-server@matronics.com > > > PS, the SN of my unit is: 2504099 > > On Tue, Jan 17, 2017 at 7:35 AM, wrote: > > Due to some stupid legislation being introduced in Europe, requiring > that > all radios are 8.33KHz spacing instead of 25KHz spacing , i am having to > replace my perfectly good and working King KY97A TSO radio ( S/N U16992 ) > ( 14volts ) in the KIS with another perfectly good and working radio , > with > the correct format. If anyone wants my radio at a rock bottom price of > 600$ > ( includes shipping , the tray, original installation manual and the > wiring > harness for a typical installation connected to an Intercom ) let me know > before it goes on EBay . > It is in perfect working condition (no scratches ) > Keith > > > This message and any attachments are intended for the use of the > addressee > or addressees only. > The unauthorised disclosure, use, dissemination or copying (either in > whole > or in part) of its > content is not permitted. > If you received this message in error, please notify the sender and > delete > it from your system. > Emails can be altered and their integrity cannot be guaranteed by the > sender. > > Please consider the environment before printing this email. > > > =================================== > List" target="_blank" rel="noreferrer"> > http://www.matronics.com/Navigator?KIS-List > =================================== > FORUMS - > _blank" rel="noreferrer">http://forums.matronics.com > =================================== > WIKI - > lank" rel="noreferrer">http://wiki.matronics.com > =================================== > b Site - > -Matt Dralle, List Admin. > target="_blank" rel="noreferrer">http://www.matronics.com/contribution > =================================== > > > This message and any attachments are intended for the use of the addressee > or > addressees only. > The unauthorised disclosure, use, dissemination or copying (either in whole > or in part) of its > content is not permitted. > If you received this message in error, please notify the sender and delete > it > from your system. > Emails can be altered and their integrity cannot be guaranteed by the > sender. > > Please consider the environment before printing this email. > > > This message and any attachments are intended for the use of the addressee > or addressees only. > The unauthorised disclosure, use, dissemination or copying (either in > whole or in part) of its > content is not permitted. > If you received this message in error, please notify the sender and delete > it from your system. > Emails can be altered and their integrity cannot be guaranteed by the > sender. > > Please consider the environment before printing this email. > > ________________________________ Message 3 _____________________________________ Time: 12:31:09 PM PST US From: "Ed Hanson" Subject: Re: KIS-List: Lens for landing light? Hi Steve, I have attached (I hope) a picture of a lens former I made for my TR4 wing. I cut the wing leading edge out to the length I needed for a landing and taxi light, then used that cutout as a mold to pour plaster of paris into to make a form for shaping the lens in the oven. When that didn't work as well as I wanted, I made a better wood shape and covered it with metal for a great former that worked fine. A finished lens is shown next to it. I don't know if the four place leading edge is the same as the two place but you are welcome to use my former if you want. I may be in INDY next Tuesday if you would like me to bring it and we could meet up. ----- Original Message ----- From: Sent: Tuesday, January 10, 2017 10:58 AM Subject: KIS-List: Lens for landing light? > > Hi Guys, > I want to add a landing light to my TR-1. Do you know where I can purchase > an acrylic cover that would match the leading edge of the wing? Or have > any thoughts? I know Van's sells a kit, but didn't know if it matched our > leading edge. > Thanks! > Steve > Sent from my iPhone > >> On Jan 3, 2017, at 4:09 AM, Keith.Miller@esa.int wrote: >> >> >> Steve >> >> OC is right. Its best to have a bit of baggage in the back when solo. >> >> I can see from my own calculations that with just me on board ( 150Lbs ) >> if >> I run it completely out of fuel , I could be getting close to the most >> forward Cof G, without anything in the back . - luckily for me i always >> have >> a load of junk ( aircraft tie down kit , spare headset, aircraft log >> books , >> airfield manuals....) in the back. >> >> >> Keith >> >> >> From: pastormac@comcast.net >> To: kis-list@matronics.com >> Date: 12/21/2016 01:56 AM >> Subject: Re: KIS-List: Gross Weight of TR-1? >> Sent by: owner-kis-list-server@matronics.com >> >> >> >> >> Hi Keith, >> Thanks for the reply! My battery is located behind the passenger seat >> and >> still was told to fly with 30 lbs in the area when flying solo. >> Steve >> >> Sent from my iPhone >> >>> On Dec 20, 2016, at 7:28 AM, Keith.Miller@esa.int wrote: >>> >>> >>> Steve >>> >>> flying solo with 30Lbs in the back when solo , doesn't make a lot of >>> sense >>> on a TR-1 , it should be possible by repositioning the battery to get >>> a >>> much better C oF G all round , my battery is located directly behind the >>> copilots seat which results in a empty Cof G at STA 58.75 ( Cof G >>> must >> be >>> in range STA 61.5 to STA 65.6) . With the empty Cof G at 58.75 its >>> almost >>> impossible to exceed the forward C of G solo. ( Pilot weight is >>> located >> at >>> STA 80 in my TR-1 as measured and calculated from the weighing >>> scales ). >>> depending on your empty Cof G i would seriously consider moving the >> battery >>> further back >>> >>> (With an Io240 B engine max take off is 1450lbs). >>> >>> >>> Keith >>> >>> >>> >>> From: pastormac@comcast.net >>> To: kis-list@matronics.com >>> Date: 12/18/2016 04:44 PM >>> Subject: Re: KIS-List: Gross Weight of TR-1? >>> Sent by: owner-kis-list-server@matronics.com >>> >>> >>> >>> Thank you! After repainting the plane and a new weight an balance, when >>> I >>> fly solo I'm having to place 30 lbs behind the seat in baggage area to >>> have >>> the proper weight distribution. I have 15 gal tanks in each wing and >>> can >>> only fly with 10 gal in each. Is this common? I weigh 195. My wife flys >> with >>> me we can have 10 in each tank and 25 baggage she weighs 135. Just the >>> way >>> the numbers came out. >>> >>> Sent from my iPhone >>> >>> On Dec 17, 2016, at 9:19 PM, Galin Hernandez wrote: >>> >> >> >> >> >> >> >> >> This message and any attachments are intended for the use of the >> addressee or addressees only. >> The unauthorised disclosure, use, dissemination or copying (either in >> whole or in part) of its >> content is not permitted. >> If you received this message in error, please notify the sender and >> delete it from your system. >> Emails can be altered and their integrity cannot be guaranteed by the >> sender. >> >> Please consider the environment before printing this email. >> >> >> >> >> >> > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kis-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/KIS-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kis-list Browse Digests http://www.matronics.com/digest/kis-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.