Today's Message Index:
----------------------
1. 10:16 AM - Re: Delimitation in wing area still? (M Ketteing)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Delimitation in wing area still? |
Hi Stephen,
When you drilled small holes into the core (but not through the second skin) and
injected the epoxy did the epoxy come out adjacent holes?
Mark Kettering
--------------------------------------------
On Tue, 7/4/17, <pastormac@comcast.net> wrote:
Subject: KIS-List: Delimitation in wing area still?
To: kis-list@matronics.com
Date: Tuesday, July 4, 2017, 7:59 PM
Hi Guys,
I experienced some delimitation in the
area where you would normally step up to enter the plane on
the pilot side. I drilled small wholes and injected epoxy in
those areas. I have been checking and after about a month I
have soft areas again. I can press on them and here the foam
underneath. I've attached a couple of pics of the affected
area where I masked off with tape. Any suggestions???
To our success,
Stephen McIntosh
To our success, Stephen McIntosh
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|