---------------------------------------------------------- KIS-List Digest Archive --- Total Messages Posted Sun 10/22/17: 17 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:53 AM - N997EM is flying! (pastormac@comcast.net) 2. 07:30 AM - Re: N997EM is flying! (Bill Schertz) 3. 08:20 AM - Re: N997EM is flying! (Alfred Rosa) 4. 09:07 AM - Re: N997EM is flying! (Tim Yoder) 5. 09:38 AM - Re: N997EM is flying! (Galin Hernandez) 6. 10:21 AM - Re: N997EM is flying! (Bill Schertz) 7. 03:05 PM - Anchor nuts? (pastormac@comcast.net) 8. 06:30 PM - Re: Anchor nuts? (Ed Hanson) 9. 06:34 PM - Re: Anchor nuts? (Ed Hanson) 10. 06:43 PM - Re: Anchor nuts? (Ed Hanson) 11. 07:02 PM - Re: Anchor nuts? (Ed Hanson) 12. 07:39 PM - Re: Anchor nuts? (Ed Hanson) 13. 07:44 PM - Re: Anchor nuts? (pastormac@comcast.net) 14. 08:43 PM - Re: Anchor nuts? (Ed Hanson) 15. 09:48 PM - Re: Anchor nuts? (Ed Hanson) 16. 10:52 PM - Re: Anchor nuts? (Ed Hanson) 17. 11:57 PM - Re: Anchor nuts? (Ed Hanson) ________________________________ Message 1 _____________________________________ Time: 06:53:47 AM PST US From: pastormac@comcast.net Subject: KIS-List: N997EM is flying! Hi Guys, Just wanted to let you know I=99m the proud owner of N997EM. I have fl own her 4 times now and after some tweaks and Whirl Wind prop adjustments, s he is flying beautiful!! To our success, Stephen McIntosh ________________________________ Message 2 _____________________________________ Time: 07:30:18 AM PST US From: "Bill Schertz" Subject: Re: KIS-List: N997EM is flying! Congratulations, Now the fun begins with flying off the required hours Bill Schertz -----Original Message----- From: pastormac@comcast.net Sent: Sunday, October 22, 2017 7:52 AM Subject: KIS-List: N997EM is flying! Hi Guys, Just wanted to let you know Im the proud owner of N997EM. I have flown her 4 times now and after some tweaks and Whirl Wind prop adjustments, she is flying beautiful!! To our success, Stephen McIntosh ________________________________ Message 3 _____________________________________ Time: 08:20:05 AM PST US From: Alfred Rosa Subject: Re: KIS-List: N997EM is flying! Hey Bill, Wondering if you had any luck selling your plane. Al Rosa > On Oct 22, 2017, at 10:29 AM, Bill Schertz wrote: > > > Congratulations, Now the fun begins with flying off the required hours > Bill Schertz > > -----Original Message----- From: pastormac@comcast.net > Sent: Sunday, October 22, 2017 7:52 AM > To: kis-list@matronics.com > Subject: KIS-List: N997EM is flying! > > Hi Guys, > Just wanted to let you know Im the proud owner of N997EM. I have flown her 4 times now and after some tweaks and Whirl Wind prop adjustments, she is flying beautiful!! > > > > > > > > > To our success, Stephen McIntosh > > > ________________________________ Message 4 _____________________________________ Time: 09:07:49 AM PST US From: "Tim Yoder" Subject: RE: KIS-List: N997EM is flying! Looks great, congratulations. Tim N52TY TR-1 -----Original Message----- From: owner-kis-list-server@matronics.com [mailto:owner-kis-list-server@matronics.com] On Behalf Of pastormac@comcast.net Sent: Sunday, October 22, 2017 6:53 AM Subject: KIS-List: N997EM is flying! Hi Guys, Just wanted to let you know Im the proud owner of N997EM. I have flown her 4 times now and after some tweaks and Whirl Wind prop adjustments, she is flying beautiful!! ________________________________ Message 5 _____________________________________ Time: 09:38:14 AM PST US From: Galin Hernandez Subject: Re: KIS-List: N997EM is flying! AWESOME!!!! Now, put lots of flying hours on it. :) Virus-free. www.avg.com <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> On Sun, Oct 22, 2017 at 9:52 AM, wrote: > Hi Guys, > Just wanted to let you know I=99m the proud owner of N997EM. I have flown > her 4 times now and after some tweaks and Whirl Wind prop adjustments, sh e > is flying beautiful!! > > > To our success, Stephen McIntosh > ________________________________ Message 6 _____________________________________ Time: 10:21:30 AM PST US From: "Bill Schertz" Subject: Re: KIS-List: N997EM is flying! Well, no -- but I haven't been actively trying yet. I am not flying enough to justify keeping it, but inertia keeps me from actively pursuing the sale, need to make a decision and get going. Bill -----Original Message----- From: Alfred Rosa Sent: Sunday, October 22, 2017 9:18 AM Subject: Re: KIS-List: N997EM is flying! Hey Bill, Wondering if you had any luck selling your plane. Al Rosa > On Oct 22, 2017, at 10:29 AM, Bill Schertz wrote: > > > Congratulations, Now the fun begins with flying off the required hours > Bill Schertz > > -----Original Message----- From: pastormac@comcast.net > Sent: Sunday, October 22, 2017 7:52 AM > To: kis-list@matronics.com > Subject: KIS-List: N997EM is flying! > > Hi Guys, > Just wanted to let you know Im the proud owner of N997EM. I have flown > her 4 times now and after some tweaks and Whirl Wind prop adjustments, she > is flying beautiful!! > > > To our success, Stephen McIntosh > > ________________________________ Message 7 _____________________________________ Time: 03:05:06 PM PST US From: pastormac@comcast.net Subject: KIS-List: Anchor nuts? Hi Guys, Im wanting to use some anchor nuts on fairing covers. What is the best way to anchor them? To our success, Stephen McIntosh ________________________________ Message 8 _____________________________________ Time: 06:30:08 PM PST US Subject: Re: KIS-List: Anchor nuts? From: Ed Hanson Rivet them to a small piece of leftover 2 ply glass about 1" x 1" and flox it to the underside of the area you are wanting to place the fastener. I doubt you have any 2 ply glass so find some suitable material to use in its place. So are you a two Kis man now? What happened to Holiday? Sent from my iPad > On Oct 22, 2017, at 5:03 PM, pastormac@comcast.net wrote: > > > Hi Guys, > Im wanting to use some anchor nuts on fairing covers. What is the best way to anchor them? > > To our success, Stephen McIntosh > > > > > ________________________________ Message 9 _____________________________________ Time: 06:34:43 PM PST US Subject: Re: KIS-List: Anchor nuts? From: Ed Hanson Rivet them to a small piece of leftover 2 ply glass about 1" x 1" and flox it to the underside of the area you are wanting to place the fastener. I doubt you have any 2 ply glass so find some suitable material to use in its place. So are you a two Kis man now? What happened to Holiday? Sent from my iPad > On Oct 22, 2017, at 5:03 PM, pastormac@comcast.net wrote: > > > Hi Guys, > Im wanting to use some anchor nuts on fairing covers. What is the best way to anchor them? > > To our success, Stephen McIntosh > > > > > ________________________________ Message 10 ____________________________________ Time: 06:43:32 PM PST US Subject: Re: KIS-List: Anchor nuts? From: Ed Hanson Rivet them to a small piece of leftover 2 ply glass about 1" x 1" and flox it to the underside of the area you are wanting to place the fastener. I doubt you have any 2 ply glass so find some suitable material to use in its place. So are you a two Kis man now? What happened to Holiday? Sent from my iPad > On Oct 22, 2017, at 5:03 PM, pastormac@comcast.net wrote: > > > Hi Guys, > Im wanting to use some anchor nuts on fairing covers. What is the best way to anchor them? > > To our success, Stephen McIntosh > > > > > ________________________________ Message 11 ____________________________________ Time: 07:02:14 PM PST US Subject: Re: KIS-List: Anchor nuts? From: Ed Hanson Rivet them to a small piece of leftover 2 ply glass about 1" x 1" and flox it to the underside of the area you are wanting to place the fastener. I doubt you have any 2 ply glass so find some suitable material to use in its place. So are you a two Kis man now? What happened to Holiday? Sent from my iPad > On Oct 22, 2017, at 5:03 PM, pastormac@comcast.net wrote: > > > Hi Guys, > Im wanting to use some anchor nuts on fairing covers. What is the best way to anchor them? > > To our success, Stephen McIntosh > > > > > ________________________________ Message 12 ____________________________________ Time: 07:39:34 PM PST US Subject: Re: KIS-List: Anchor nuts? From: Ed Hanson Rivet them to a small piece of leftover 2 ply glass about 1" x 1" and flox it to the underside of the area you are wanting to place the fastener. I doubt you have any 2 ply glass so find some suitable material to use in its place. So are you a two Kis man now? What happened to Holiday? Sent from my iPad > On Oct 22, 2017, at 5:03 PM, pastormac@comcast.net wrote: > > > Hi Guys, > Im wanting to use some anchor nuts on fairing covers. What is the best way to anchor them? > > To our success, Stephen McIntosh > > > > > ________________________________ Message 13 ____________________________________ Time: 07:44:01 PM PST US From: pastormac@comcast.net Subject: Re: KIS-List: Anchor nuts? Thanks!! I sold her a couple months back. I was looking at a Glasair, but the desk fell through. To our success, Stephen McIntosh > On Oct 22, 2017, at 9:28 PM, Ed Hanson wrote: > > > Rivet them to a small piece of leftover 2 ply glass about 1" x 1" and flox it to the underside of the area you are wanting to place the fastener. I doubt you have any 2 ply glass so find some suitable material to use in its place. > So are you a two Kis man now? What happened to Holiday? > > Sent from my iPad > >> On Oct 22, 2017, at 5:03 PM, pastormac@comcast.net wrote: >> >> >> Hi Guys, >> Im wanting to use some anchor nuts on fairing covers. What is the best way to anchor them? >> >> To our success, Stephen McIntosh >> >> >> >> >> > > > > > > ________________________________ Message 14 ____________________________________ Time: 08:43:57 PM PST US Subject: Re: KIS-List: Anchor nuts? From: Ed Hanson Rivet them to a small piece of leftover 2 ply glass about 1" x 1" and flox it to the underside of the area you are wanting to place the fastener. I doubt you have any 2 ply glass so find some suitable material to use in its place. So are you a two Kis man now? What happened to Holiday? Sent from my iPad > On Oct 22, 2017, at 5:03 PM, pastormac@comcast.net wrote: > > > Hi Guys, > Im wanting to use some anchor nuts on fairing covers. What is the best way to anchor them? > > To our success, Stephen McIntosh > > > > > ________________________________ Message 15 ____________________________________ Time: 09:48:13 PM PST US Subject: Re: KIS-List: Anchor nuts? From: Ed Hanson Rivet them to a small piece of leftover 2 ply glass about 1" x 1" and flox it to the underside of the area you are wanting to place the fastener. I doubt you have any 2 ply glass so find some suitable material to use in its place. So are you a two Kis man now? What happened to Holiday? Sent from my iPad > On Oct 22, 2017, at 5:03 PM, pastormac@comcast.net wrote: > > > Hi Guys, > Im wanting to use some anchor nuts on fairing covers. What is the best way to anchor them? > > To our success, Stephen McIntosh > > > > > ________________________________ Message 16 ____________________________________ Time: 10:52:31 PM PST US Subject: Re: KIS-List: Anchor nuts? From: Ed Hanson Rivet them to a small piece of leftover 2 ply glass about 1" x 1" and flox it to the underside of the area you are wanting to place the fastener. I doubt you have any 2 ply glass so find some suitable material to use in its place. So are you a two Kis man now? What happened to Holiday? Sent from my iPad > On Oct 22, 2017, at 5:03 PM, pastormac@comcast.net wrote: > > > Hi Guys, > Im wanting to use some anchor nuts on fairing covers. What is the best way to anchor them? > > To our success, Stephen McIntosh > > > > > ________________________________ Message 17 ____________________________________ Time: 11:57:20 PM PST US Subject: Re: KIS-List: Anchor nuts? From: Ed Hanson Rivet them to a small piece of leftover 2 ply glass about 1" x 1" and flox it to the underside of the area you are wanting to place the fastener. I doubt you have any 2 ply glass so find some suitable material to use in its place. So are you a two Kis man now? What happened to Holiday? Sent from my iPad > On Oct 22, 2017, at 5:03 PM, pastormac@comcast.net wrote: > > > Hi Guys, > Im wanting to use some anchor nuts on fairing covers. What is the best way to anchor them? > > To our success, Stephen McIntosh > > > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kis-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/KIS-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kis-list Browse Digests http://www.matronics.com/digest/kis-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.