---------------------------------------------------------- KIS-List Digest Archive --- Total Messages Posted Fri 11/03/17: 25 ---------------------------------------------------------- Today's Message Index: ---------------------- 0. 06:07 AM - Please Make A Contribution To Support Your Lists (Matt Dralle) 1. 12:16 AM - Re: KIS4 Orientation (Ed Hanson) 2. 12:24 AM - Re: KIS4 Orientation (Ed Hanson) 3. 01:04 AM - Re: KIS4 Orientation (Ed Hanson) 4. 01:28 AM - Re: KIS4 Orientation (Ed Hanson) 5. 02:08 AM - Re: KIS4 Orientation (Ed Hanson) 6. 02:32 AM - Re: KIS4 Orientation (Ed Hanson) 7. 03:13 AM - Re: KIS4 Orientation (Ed Hanson) 8. 03:37 AM - Re: KIS4 Orientation (Ed Hanson) 9. 04:17 AM - Re: KIS4 Orientation (Ed Hanson) 10. 04:41 AM - Re: KIS4 Orientation (Ed Hanson) 11. 06:18 AM - Re: KIS4 Orientation (mark_trickel) 12. 08:50 AM - Scott Stearns TR-1 in December Kitplanes (Bill Schertz) 13. 11:42 AM - Re: KIS4 Orientation (Robert Reed) 14. 02:14 PM - Re: Re: KIS4 Orientation (Galin Hernandez) 15. 02:25 PM - Re: KIS4 Orientation (Galin Hernandez) 16. 02:50 PM - Re: KIS4 Orientation (Robert Reed) 17. 05:52 PM - Re: KIS4 Orientation (Ed Hanson) 18. 05:56 PM - Re: KIS4 Orientation (Ed Hanson) 19. 06:06 PM - Re: KIS4 Orientation (Ed Hanson) 20. 06:26 PM - Re: KIS4 Orientation (Ed Hanson) 21. 07:06 PM - Re: KIS4 Orientation (Ed Hanson) 22. 08:10 PM - Re: KIS4 Orientation (Ed Hanson) 23. 10:19 PM - Re: KIS4 Orientation (Ed Hanson) 24. 11:23 PM - Re: KIS4 Orientation (Ed Hanson) ________________________________ Message 0 _____________________________________ Time: 06:07:47 AM PST US From: Matt Dralle Subject: KIS-List: Please Make A Contribution To Support Your Lists Dear Listers, There is no advertising income to support the Matronics Email Lists and Forums. The operation is supported 100% by your personal Contributions during the November Fund Raiser. Please make your Contribution today to support the continued operation and upgrade of these services. You can pick up a really nice gift for making your Contribution too! You may use a Credit Card or Paypal at the Matronics Contribution Site here: http://www.matronics.com/contribution or, you can send a personal check to the following address: Matronics / Matt Dralle 581 Jeannie Way Livermore, CA 94550 Thank you in advance for your generous support! Matt Dralle Matronics Email List and Forum Administrator ________________________________ Message 1 _____________________________________ Time: 12:16:12 AM PST US From: "Ed Hanson" Subject: Re: KIS-List: KIS4 Orientation Thanks for helping out another builder with flight training Galin! ----- Original Message ----- From: Galin Hernandez To: kis-list@matronics.com Sent: Thursday, November 02, 2017 9:18 PM Subject: KIS-List: KIS4 Orientation KIS4 builder Fabricio and I had a great pair of flights today from St Augustine (KSGJ) to Ocala (KOCF) and back. Here is a photo taken after we got back to the KSGJ hangar. ________________________________ Message 2 _____________________________________ Time: 12:24:39 AM PST US From: "Ed Hanson" Subject: Re: KIS-List: KIS4 Orientation And they would be wise to accept your generous offer. ----- Original Message ----- From: Galin Hernandez To: kis-list@matronics.com Sent: Thursday, November 02, 2017 9:47 PM Subject: Re: KIS-List: KIS4 Orientation The offer of some KIS4 "orientation flying" is open to any KIS builder/owner. :) On Thu, Nov 2, 2017 at 10:33 PM, Ed Hanson wrote: Thanks for helping out another builder with flight training Galin! ----- Original Message ----- From: Galin Hernandez To: kis-list@matronics.com Sent: Thursday, November 02, 2017 9:18 PM Subject: KIS-List: KIS4 Orientation KIS4 builder Fabricio and I had a great pair of flights today from St Augustine (KSGJ) to Ocala (KOCF) and back. Here is a photo taken after we got back to the KSGJ hangar. ________________________________ Message 3 _____________________________________ Time: 01:04:15 AM PST US From: "Ed Hanson" Subject: Re: KIS-List: KIS4 Orientation Thanks for helping out another builder with flight training Galin! ----- Original Message ----- From: Galin Hernandez To: kis-list@matronics.com Sent: Thursday, November 02, 2017 9:18 PM Subject: KIS-List: KIS4 Orientation KIS4 builder Fabricio and I had a great pair of flights today from St Augustine (KSGJ) to Ocala (KOCF) and back. Here is a photo taken after we got back to the KSGJ hangar. ________________________________ Message 4 _____________________________________ Time: 01:28:28 AM PST US From: "Ed Hanson" Subject: Re: KIS-List: KIS4 Orientation And they would be wise to accept your generous offer. ----- Original Message ----- From: Galin Hernandez To: kis-list@matronics.com Sent: Thursday, November 02, 2017 9:47 PM Subject: Re: KIS-List: KIS4 Orientation The offer of some KIS4 "orientation flying" is open to any KIS builder/owner. :) On Thu, Nov 2, 2017 at 10:33 PM, Ed Hanson wrote: Thanks for helping out another builder with flight training Galin! ----- Original Message ----- From: Galin Hernandez To: kis-list@matronics.com Sent: Thursday, November 02, 2017 9:18 PM Subject: KIS-List: KIS4 Orientation KIS4 builder Fabricio and I had a great pair of flights today from St Augustine (KSGJ) to Ocala (KOCF) and back. Here is a photo taken after we got back to the KSGJ hangar. ________________________________ Message 5 _____________________________________ Time: 02:08:33 AM PST US From: "Ed Hanson" Subject: Re: KIS-List: KIS4 Orientation Thanks for helping out another builder with flight training Galin! ----- Original Message ----- From: Galin Hernandez To: kis-list@matronics.com Sent: Thursday, November 02, 2017 9:18 PM Subject: KIS-List: KIS4 Orientation KIS4 builder Fabricio and I had a great pair of flights today from St Augustine (KSGJ) to Ocala (KOCF) and back. Here is a photo taken after we got back to the KSGJ hangar. ________________________________ Message 6 _____________________________________ Time: 02:32:53 AM PST US From: "Ed Hanson" Subject: Re: KIS-List: KIS4 Orientation And they would be wise to accept your generous offer. ----- Original Message ----- From: Galin Hernandez To: kis-list@matronics.com Sent: Thursday, November 02, 2017 9:47 PM Subject: Re: KIS-List: KIS4 Orientation The offer of some KIS4 "orientation flying" is open to any KIS builder/owner. :) On Thu, Nov 2, 2017 at 10:33 PM, Ed Hanson wrote: Thanks for helping out another builder with flight training Galin! ----- Original Message ----- From: Galin Hernandez To: kis-list@matronics.com Sent: Thursday, November 02, 2017 9:18 PM Subject: KIS-List: KIS4 Orientation KIS4 builder Fabricio and I had a great pair of flights today from St Augustine (KSGJ) to Ocala (KOCF) and back. Here is a photo taken after we got back to the KSGJ hangar. ________________________________ Message 7 _____________________________________ Time: 03:13:02 AM PST US From: "Ed Hanson" Subject: Re: KIS-List: KIS4 Orientation Thanks for helping out another builder with flight training Galin! ----- Original Message ----- From: Galin Hernandez To: kis-list@matronics.com Sent: Thursday, November 02, 2017 9:18 PM Subject: KIS-List: KIS4 Orientation KIS4 builder Fabricio and I had a great pair of flights today from St Augustine (KSGJ) to Ocala (KOCF) and back. Here is a photo taken after we got back to the KSGJ hangar. ________________________________ Message 8 _____________________________________ Time: 03:37:24 AM PST US From: "Ed Hanson" Subject: Re: KIS-List: KIS4 Orientation And they would be wise to accept your generous offer. ----- Original Message ----- From: Galin Hernandez To: kis-list@matronics.com Sent: Thursday, November 02, 2017 9:47 PM Subject: Re: KIS-List: KIS4 Orientation The offer of some KIS4 "orientation flying" is open to any KIS builder/owner. :) On Thu, Nov 2, 2017 at 10:33 PM, Ed Hanson wrote: Thanks for helping out another builder with flight training Galin! ----- Original Message ----- From: Galin Hernandez To: kis-list@matronics.com Sent: Thursday, November 02, 2017 9:18 PM Subject: KIS-List: KIS4 Orientation KIS4 builder Fabricio and I had a great pair of flights today from St Augustine (KSGJ) to Ocala (KOCF) and back. Here is a photo taken after we got back to the KSGJ hangar. ________________________________ Message 9 _____________________________________ Time: 04:17:41 AM PST US From: "Ed Hanson" Subject: Re: KIS-List: KIS4 Orientation Thanks for helping out another builder with flight training Galin! ----- Original Message ----- From: Galin Hernandez To: kis-list@matronics.com Sent: Thursday, November 02, 2017 9:18 PM Subject: KIS-List: KIS4 Orientation KIS4 builder Fabricio and I had a great pair of flights today from St Augustine (KSGJ) to Ocala (KOCF) and back. Here is a photo taken after we got back to the KSGJ hangar. ________________________________ Message 10 ____________________________________ Time: 04:41:39 AM PST US From: "Ed Hanson" Subject: Re: KIS-List: KIS4 Orientation And they would be wise to accept your generous offer. ----- Original Message ----- From: Galin Hernandez To: kis-list@matronics.com Sent: Thursday, November 02, 2017 9:47 PM Subject: Re: KIS-List: KIS4 Orientation The offer of some KIS4 "orientation flying" is open to any KIS builder/owner. :) On Thu, Nov 2, 2017 at 10:33 PM, Ed Hanson wrote: Thanks for helping out another builder with flight training Galin! ----- Original Message ----- From: Galin Hernandez To: kis-list@matronics.com Sent: Thursday, November 02, 2017 9:18 PM Subject: KIS-List: KIS4 Orientation KIS4 builder Fabricio and I had a great pair of flights today from St Augustine (KSGJ) to Ocala (KOCF) and back. Here is a photo taken after we got back to the KSGJ hangar. ________________________________ Message 11 ____________________________________ Time: 06:18:27 AM PST US Subject: KIS-List: Re: KIS4 Orientation From: "mark_trickel" Very cool Galin, Do you have any tail wheel experience? I'm about a year out from flying! At Oshkosh this year we met Fabricio's partner Roberto Zanasi, and his wife. Roberto has been doing most of the work on the TR-4. Mark K. gave him a few pointers during their visit. We also met a Volato 400 builder, Juan Pinhero, he showed us a video on his phone of his first flight. The airplane has a (I believe) O-520 in it, Mark K provided engineering information for the bigger engine install. MT Read this topic online here: http://forums.matronics.com/viewtopic.php?p=474201#474201 ________________________________ Message 12 ____________________________________ Time: 08:50:52 AM PST US From: "Bill Schertz" Subject: KIS-List: Scott Stearns TR-1 in December Kitplanes Built it as a taildragger. ________________________________ Message 13 ____________________________________ Time: 11:42:56 AM PST US From: Robert Reed Subject: Re: KIS-List: KIS4 Orientation Galin, I was sure hoping to take you up on that offer real soon but once again lif e, or in this case a wedding of my one and only daughter, got in the way. =C2- I sure wish she had decided to elope, would have cost me a lot less. =C2- That, along with now being in the design phase of my retirement home has pushed back the final completion of my KIS Cruiser until sometime next spring.=C2- I am so damn close but it seems like forever to go.=C2- Be en waiting for an AS order with=C2-the last of my wiring and fuel=C2-sy stem components for over a month now and still no word on shipment.=C2- I wonder if I could stretch some 12 ga into 16 ga and 18 ga?=C2- Probably not... I will finish this marathon if it is the last thing I do..... Bob Reed From: Galin Hernandez To: "kis-list@matronics.com" Sent: Thursday, November 2, 2017 9:49 PM Subject: Re: KIS-List: KIS4 Orientation The offer of some KIS4 "orientation flying" is open to any KIS builder/owne r.=C2- =C2-:) On Thu, Nov 2, 2017 at 10:33 PM, Ed Hanson wrote: Thanks for helping out another builder with flight training Galin! ----- Original Message ----- From: Galin Hernandez To: kis-list@matronic s.com Sent: Thursday, November 02, 2017 9:18 PM Subject: KIS-List: KIS4 Or ientation KIS4 builder Fabricio and I had a great pair of flights today from St Augu stine (KSGJ) to Ocala (KOCF) and back. Here is a photo taken after we got b ack to the KSGJ hangar. ________________________________ Message 14 ____________________________________ Time: 02:14:39 PM PST US From: Galin Hernandez Subject: Re: KIS-List: Re: KIS4 Orientation My last tail wheel flight was over 20yrs ago so can't help out there. ;) On Fri, Nov 3, 2017 at 9:16 AM, mark_trickel wrote: > > Very cool Galin, Do you have any tail wheel experience? I'm about a year > out from flying! > > At Oshkosh this year we met Fabricio's partner Roberto Zanasi, and his > wife. Roberto has been doing most of the work on the TR-4. Mark K. gave him > a few pointers during their visit. > > We also met a Volato 400 builder, Juan Pinhero, he showed us a video on > his phone of his first flight. The airplane has a (I believe) O-520 in it, > Mark K provided engineering information for the bigger engine install. > > MT > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=474201#474201 > > ________________________________ Message 15 ____________________________________ Time: 02:25:21 PM PST US From: Galin Hernandez Subject: Re: KIS-List: KIS4 Orientation Hey, finishing sometime next spring is MUCH better than finishing sometime next century! BUILD ON!!! :) On Fri, Nov 3, 2017 at 2:41 PM, Robert Reed wrote: > Galin, > > I was sure hoping to take you up on that offer real soon but once again > life, or in this case a wedding of my one and only daughter, got in the > way. I sure wish she had decided to elope, would have cost me a lot less. > That, along with now being in the design phase of my retirement home has > pushed back the final completion of my KIS Cruiser until sometime next > spring. I am so damn close but it seems like forever to go. Been waiting > for an AS order with the last of my wiring and fuel system components for > over a month now and still no word on shipment. I wonder if I could > stretch some 12 ga into 16 ga and 18 ga? Probably not... > > I will finish this marathon if it is the last thing I do..... > > Bob Reed > > > ------------------------------ > *From:* Galin Hernandez > *To:* "kis-list@matronics.com" > *Sent:* Thursday, November 2, 2017 9:49 PM > *Subject:* Re: KIS-List: KIS4 Orientation > > The offer of some KIS4 "orientation flying" is open to any KIS > builder/owner. :) > > On Thu, Nov 2, 2017 at 10:33 PM, Ed Hanson wrote: > > Thanks for helping out another builder with flight training Galin! > > ----- Original Message ----- > *From:* Galin Hernandez > *To:* kis-list@matronics.com > *Sent:* Thursday, November 02, 2017 9:18 PM > *Subject:* KIS-List: KIS4 Orientation > > KIS4 builder Fabricio and I had a great pair of flights today from St > Augustine (KSGJ) to Ocala (KOCF) and back. Here is a photo taken after we > got back to the KSGJ hangar. > > ________________________________ Message 16 ____________________________________ Time: 02:50:02 PM PST US From: Robert Reed Subject: Re: KIS-List: KIS4 Orientation Galin, I would totally agree with you if I hadn't started the darn thing not just in the last century but in the last millennium .=C2- :( BOB From: Galin Hernandez To: "kis-list@matronics.com" Sent: Friday, November 3, 2017 4:25 PM Subject: Re: KIS-List: KIS4 Orientation Hey, finishing sometime next spring is MUCH better than finishing sometime next century! BUILD ON!!!=C2- :) On Fri, Nov 3, 2017 at 2:41 PM, Robert Reed wrote: Galin, I was sure hoping to take you up on that offer real soon but once again lif e, or in this case a wedding of my one and only daughter, got in the way. =C2- I sure wish she had decided to elope, would have cost me a lot less. =C2- That, along with now being in the design phase of my retirement home has pushed back the final completion of my KIS Cruiser until sometime next spring.=C2- I am so damn close but it seems like forever to go.=C2- Be en waiting for an AS order with=C2-the last of my wiring and fuel=C2-sy stem components for over a month now and still no word on shipment.=C2- I wonder if I could stretch some 12 ga into 16 ga and 18 ga?=C2- Probably not... I will finish this marathon if it is the last thing I do..... Bob Reed From: Galin Hernandez To: "kis-list@matronics.com" Sent: Thursday, November 2, 2017 9:49 PM Subject: Re: KIS-List: KIS4 Orientation The offer of some KIS4 "orientation flying" is open to any KIS builder/owne r.=C2- =C2-:) On Thu, Nov 2, 2017 at 10:33 PM, Ed Hanson wrote: Thanks for helping out another builder with flight training Galin! ----- Original Message ----- From: Galin Hernandez To: kis-list@matronic s.com Sent: Thursday, November 02, 2017 9:18 PM Subject: KIS-List: KIS4 Or ientation KIS4 builder Fabricio and I had a great pair of flights today from St Augu stine (KSGJ) to Ocala (KOCF) and back. Here is a photo taken after we got b ack to the KSGJ hangar. ________________________________ Message 17 ____________________________________ Time: 05:52:05 PM PST US From: "Ed Hanson" Subject: Re: KIS-List: KIS4 Orientation Bob, good things come to those who wait! I can attest to that. ----- Original Message ----- From: Robert Reed To: kis-list@matronics.com Sent: Friday, November 03, 2017 4:48 PM Subject: Re: KIS-List: KIS4 Orientation Galin, I would totally agree with you if I hadn't started the darn thing not just in the last century but in the last millennium . :( BOB ------------------------------------------------------------------------- ----- From: Galin Hernandez To: "kis-list@matronics.com" Sent: Friday, November 3, 2017 4:25 PM Subject: Re: KIS-List: KIS4 Orientation Hey, finishing sometime next spring is MUCH better than finishing sometime next century! BUILD ON!!! :) On Fri, Nov 3, 2017 at 2:41 PM, Robert Reed wrote: Galin, I was sure hoping to take you up on that offer real soon but once again life, or in this case a wedding of my one and only daughter, got in the way. I sure wish she had decided to elope, would have cost me a lot less. That, along with now being in the design phase of my retirement home has pushed back the final completion of my KIS Cruiser until sometime next spring. I am so damn close but it seems like forever to go. Been waiting for an AS order with the last of my wiring and fuel system components for over a month now and still no word on shipment. I wonder if I could stretch some 12 ga into 16 ga and 18 ga? Probably not... I will finish this marathon if it is the last thing I do..... Bob Reed ------------------------------------------------------------------------- --- From: Galin Hernandez To: "kis-list@matronics.com" Sent: Thursday, November 2, 2017 9:49 PM Subject: Re: KIS-List: KIS4 Orientation The offer of some KIS4 "orientation flying" is open to any KIS builder/owner. :) On Thu, Nov 2, 2017 at 10:33 PM, Ed Hanson wrote: Thanks for helping out another builder with flight training Galin! ----- Original Message ----- From: Galin Hernandez To: kis-list@matronics.com Sent: Thursday, November 02, 2017 9:18 PM Subject: KIS-List: KIS4 Orientation KIS4 builder Fabricio and I had a great pair of flights today from St Augustine (KSGJ) to Ocala (KOCF) and back. Here is a photo taken after we got back to the KSGJ hangar. ________________________________ Message 18 ____________________________________ Time: 05:56:51 PM PST US From: "Ed Hanson" Subject: Re: KIS-List: KIS4 Orientation Bob, good things come to those who wait! I can attest to that. ----- Original Message ----- From: Robert Reed To: kis-list@matronics.com Sent: Friday, November 03, 2017 4:48 PM Subject: Re: KIS-List: KIS4 Orientation Galin, I would totally agree with you if I hadn't started the darn thing not just in the last century but in the last millennium . :( BOB ------------------------------------------------------------------------- ----- From: Galin Hernandez To: "kis-list@matronics.com" Sent: Friday, November 3, 2017 4:25 PM Subject: Re: KIS-List: KIS4 Orientation Hey, finishing sometime next spring is MUCH better than finishing sometime next century! BUILD ON!!! :) On Fri, Nov 3, 2017 at 2:41 PM, Robert Reed wrote: Galin, I was sure hoping to take you up on that offer real soon but once again life, or in this case a wedding of my one and only daughter, got in the way. I sure wish she had decided to elope, would have cost me a lot less. That, along with now being in the design phase of my retirement home has pushed back the final completion of my KIS Cruiser until sometime next spring. I am so damn close but it seems like forever to go. Been waiting for an AS order with the last of my wiring and fuel system components for over a month now and still no word on shipment. I wonder if I could stretch some 12 ga into 16 ga and 18 ga? Probably not... I will finish this marathon if it is the last thing I do..... Bob Reed ------------------------------------------------------------------------- --- From: Galin Hernandez To: "kis-list@matronics.com" Sent: Thursday, November 2, 2017 9:49 PM Subject: Re: KIS-List: KIS4 Orientation The offer of some KIS4 "orientation flying" is open to any KIS builder/owner. :) On Thu, Nov 2, 2017 at 10:33 PM, Ed Hanson wrote: Thanks for helping out another builder with flight training Galin! ----- Original Message ----- From: Galin Hernandez To: kis-list@matronics.com Sent: Thursday, November 02, 2017 9:18 PM Subject: KIS-List: KIS4 Orientation KIS4 builder Fabricio and I had a great pair of flights today from St Augustine (KSGJ) to Ocala (KOCF) and back. Here is a photo taken after we got back to the KSGJ hangar. ________________________________ Message 19 ____________________________________ Time: 06:06:39 PM PST US From: "Ed Hanson" Subject: Re: KIS-List: KIS4 Orientation Bob, good things come to those who wait! I can attest to that. ----- Original Message ----- From: Robert Reed To: kis-list@matronics.com Sent: Friday, November 03, 2017 4:48 PM Subject: Re: KIS-List: KIS4 Orientation Galin, I would totally agree with you if I hadn't started the darn thing not just in the last century but in the last millennium . :( BOB ------------------------------------------------------------------------- ----- From: Galin Hernandez To: "kis-list@matronics.com" Sent: Friday, November 3, 2017 4:25 PM Subject: Re: KIS-List: KIS4 Orientation Hey, finishing sometime next spring is MUCH better than finishing sometime next century! BUILD ON!!! :) On Fri, Nov 3, 2017 at 2:41 PM, Robert Reed wrote: Galin, I was sure hoping to take you up on that offer real soon but once again life, or in this case a wedding of my one and only daughter, got in the way. I sure wish she had decided to elope, would have cost me a lot less. That, along with now being in the design phase of my retirement home has pushed back the final completion of my KIS Cruiser until sometime next spring. I am so damn close but it seems like forever to go. Been waiting for an AS order with the last of my wiring and fuel system components for over a month now and still no word on shipment. I wonder if I could stretch some 12 ga into 16 ga and 18 ga? Probably not... I will finish this marathon if it is the last thing I do..... Bob Reed ------------------------------------------------------------------------- --- From: Galin Hernandez To: "kis-list@matronics.com" Sent: Thursday, November 2, 2017 9:49 PM Subject: Re: KIS-List: KIS4 Orientation The offer of some KIS4 "orientation flying" is open to any KIS builder/owner. :) On Thu, Nov 2, 2017 at 10:33 PM, Ed Hanson wrote: Thanks for helping out another builder with flight training Galin! ----- Original Message ----- From: Galin Hernandez To: kis-list@matronics.com Sent: Thursday, November 02, 2017 9:18 PM Subject: KIS-List: KIS4 Orientation KIS4 builder Fabricio and I had a great pair of flights today from St Augustine (KSGJ) to Ocala (KOCF) and back. Here is a photo taken after we got back to the KSGJ hangar. ________________________________ Message 20 ____________________________________ Time: 06:26:38 PM PST US From: "Ed Hanson" Subject: Re: KIS-List: KIS4 Orientation Bob, good things come to those who wait! I can attest to that. ----- Original Message ----- From: Robert Reed To: kis-list@matronics.com Sent: Friday, November 03, 2017 4:48 PM Subject: Re: KIS-List: KIS4 Orientation Galin, I would totally agree with you if I hadn't started the darn thing not just in the last century but in the last millennium . :( BOB ------------------------------------------------------------------------- ----- From: Galin Hernandez To: "kis-list@matronics.com" Sent: Friday, November 3, 2017 4:25 PM Subject: Re: KIS-List: KIS4 Orientation Hey, finishing sometime next spring is MUCH better than finishing sometime next century! BUILD ON!!! :) On Fri, Nov 3, 2017 at 2:41 PM, Robert Reed wrote: Galin, I was sure hoping to take you up on that offer real soon but once again life, or in this case a wedding of my one and only daughter, got in the way. I sure wish she had decided to elope, would have cost me a lot less. That, along with now being in the design phase of my retirement home has pushed back the final completion of my KIS Cruiser until sometime next spring. I am so damn close but it seems like forever to go. Been waiting for an AS order with the last of my wiring and fuel system components for over a month now and still no word on shipment. I wonder if I could stretch some 12 ga into 16 ga and 18 ga? Probably not... I will finish this marathon if it is the last thing I do..... Bob Reed ------------------------------------------------------------------------- --- From: Galin Hernandez To: "kis-list@matronics.com" Sent: Thursday, November 2, 2017 9:49 PM Subject: Re: KIS-List: KIS4 Orientation The offer of some KIS4 "orientation flying" is open to any KIS builder/owner. :) On Thu, Nov 2, 2017 at 10:33 PM, Ed Hanson wrote: Thanks for helping out another builder with flight training Galin! ----- Original Message ----- From: Galin Hernandez To: kis-list@matronics.com Sent: Thursday, November 02, 2017 9:18 PM Subject: KIS-List: KIS4 Orientation KIS4 builder Fabricio and I had a great pair of flights today from St Augustine (KSGJ) to Ocala (KOCF) and back. Here is a photo taken after we got back to the KSGJ hangar. ________________________________ Message 21 ____________________________________ Time: 07:06:47 PM PST US From: "Ed Hanson" Subject: Re: KIS-List: KIS4 Orientation Bob, good things come to those who wait! I can attest to that. ----- Original Message ----- From: Robert Reed To: kis-list@matronics.com Sent: Friday, November 03, 2017 4:48 PM Subject: Re: KIS-List: KIS4 Orientation Galin, I would totally agree with you if I hadn't started the darn thing not just in the last century but in the last millennium . :( BOB ------------------------------------------------------------------------- ----- From: Galin Hernandez To: "kis-list@matronics.com" Sent: Friday, November 3, 2017 4:25 PM Subject: Re: KIS-List: KIS4 Orientation Hey, finishing sometime next spring is MUCH better than finishing sometime next century! BUILD ON!!! :) On Fri, Nov 3, 2017 at 2:41 PM, Robert Reed wrote: Galin, I was sure hoping to take you up on that offer real soon but once again life, or in this case a wedding of my one and only daughter, got in the way. I sure wish she had decided to elope, would have cost me a lot less. That, along with now being in the design phase of my retirement home has pushed back the final completion of my KIS Cruiser until sometime next spring. I am so damn close but it seems like forever to go. Been waiting for an AS order with the last of my wiring and fuel system components for over a month now and still no word on shipment. I wonder if I could stretch some 12 ga into 16 ga and 18 ga? Probably not... I will finish this marathon if it is the last thing I do..... Bob Reed ------------------------------------------------------------------------- --- From: Galin Hernandez To: "kis-list@matronics.com" Sent: Thursday, November 2, 2017 9:49 PM Subject: Re: KIS-List: KIS4 Orientation The offer of some KIS4 "orientation flying" is open to any KIS builder/owner. :) On Thu, Nov 2, 2017 at 10:33 PM, Ed Hanson wrote: Thanks for helping out another builder with flight training Galin! ----- Original Message ----- From: Galin Hernandez To: kis-list@matronics.com Sent: Thursday, November 02, 2017 9:18 PM Subject: KIS-List: KIS4 Orientation KIS4 builder Fabricio and I had a great pair of flights today from St Augustine (KSGJ) to Ocala (KOCF) and back. Here is a photo taken after we got back to the KSGJ hangar. ________________________________ Message 22 ____________________________________ Time: 08:10:48 PM PST US From: "Ed Hanson" Subject: Re: KIS-List: KIS4 Orientation Bob, good things come to those who wait! I can attest to that. ----- Original Message ----- From: Robert Reed To: kis-list@matronics.com Sent: Friday, November 03, 2017 4:48 PM Subject: Re: KIS-List: KIS4 Orientation Galin, I would totally agree with you if I hadn't started the darn thing not just in the last century but in the last millennium . :( BOB ------------------------------------------------------------------------- ----- From: Galin Hernandez To: "kis-list@matronics.com" Sent: Friday, November 3, 2017 4:25 PM Subject: Re: KIS-List: KIS4 Orientation Hey, finishing sometime next spring is MUCH better than finishing sometime next century! BUILD ON!!! :) On Fri, Nov 3, 2017 at 2:41 PM, Robert Reed wrote: Galin, I was sure hoping to take you up on that offer real soon but once again life, or in this case a wedding of my one and only daughter, got in the way. I sure wish she had decided to elope, would have cost me a lot less. That, along with now being in the design phase of my retirement home has pushed back the final completion of my KIS Cruiser until sometime next spring. I am so damn close but it seems like forever to go. Been waiting for an AS order with the last of my wiring and fuel system components for over a month now and still no word on shipment. I wonder if I could stretch some 12 ga into 16 ga and 18 ga? Probably not... I will finish this marathon if it is the last thing I do..... Bob Reed ------------------------------------------------------------------------- --- From: Galin Hernandez To: "kis-list@matronics.com" Sent: Thursday, November 2, 2017 9:49 PM Subject: Re: KIS-List: KIS4 Orientation The offer of some KIS4 "orientation flying" is open to any KIS builder/owner. :) On Thu, Nov 2, 2017 at 10:33 PM, Ed Hanson wrote: Thanks for helping out another builder with flight training Galin! ----- Original Message ----- From: Galin Hernandez To: kis-list@matronics.com Sent: Thursday, November 02, 2017 9:18 PM Subject: KIS-List: KIS4 Orientation KIS4 builder Fabricio and I had a great pair of flights today from St Augustine (KSGJ) to Ocala (KOCF) and back. Here is a photo taken after we got back to the KSGJ hangar. ________________________________ Message 23 ____________________________________ Time: 10:19:29 PM PST US From: "Ed Hanson" Subject: Re: KIS-List: KIS4 Orientation Bob, good things come to those who wait! I can attest to that. ----- Original Message ----- From: Robert Reed To: kis-list@matronics.com Sent: Friday, November 03, 2017 4:48 PM Subject: Re: KIS-List: KIS4 Orientation Galin, I would totally agree with you if I hadn't started the darn thing not just in the last century but in the last millennium . :( BOB ------------------------------------------------------------------------- ----- From: Galin Hernandez To: "kis-list@matronics.com" Sent: Friday, November 3, 2017 4:25 PM Subject: Re: KIS-List: KIS4 Orientation Hey, finishing sometime next spring is MUCH better than finishing sometime next century! BUILD ON!!! :) On Fri, Nov 3, 2017 at 2:41 PM, Robert Reed wrote: Galin, I was sure hoping to take you up on that offer real soon but once again life, or in this case a wedding of my one and only daughter, got in the way. I sure wish she had decided to elope, would have cost me a lot less. That, along with now being in the design phase of my retirement home has pushed back the final completion of my KIS Cruiser until sometime next spring. I am so damn close but it seems like forever to go. Been waiting for an AS order with the last of my wiring and fuel system components for over a month now and still no word on shipment. I wonder if I could stretch some 12 ga into 16 ga and 18 ga? Probably not... I will finish this marathon if it is the last thing I do..... Bob Reed ------------------------------------------------------------------------- --- From: Galin Hernandez To: "kis-list@matronics.com" Sent: Thursday, November 2, 2017 9:49 PM Subject: Re: KIS-List: KIS4 Orientation The offer of some KIS4 "orientation flying" is open to any KIS builder/owner. :) On Thu, Nov 2, 2017 at 10:33 PM, Ed Hanson wrote: Thanks for helping out another builder with flight training Galin! ----- Original Message ----- From: Galin Hernandez To: kis-list@matronics.com Sent: Thursday, November 02, 2017 9:18 PM Subject: KIS-List: KIS4 Orientation KIS4 builder Fabricio and I had a great pair of flights today from St Augustine (KSGJ) to Ocala (KOCF) and back. Here is a photo taken after we got back to the KSGJ hangar. ________________________________ Message 24 ____________________________________ Time: 11:23:53 PM PST US From: "Ed Hanson" Subject: Re: KIS-List: KIS4 Orientation Bob, good things come to those who wait! I can attest to that. ----- Original Message ----- From: Robert Reed To: kis-list@matronics.com Sent: Friday, November 03, 2017 4:48 PM Subject: Re: KIS-List: KIS4 Orientation Galin, I would totally agree with you if I hadn't started the darn thing not just in the last century but in the last millennium . :( BOB ------------------------------------------------------------------------- ----- From: Galin Hernandez To: "kis-list@matronics.com" Sent: Friday, November 3, 2017 4:25 PM Subject: Re: KIS-List: KIS4 Orientation Hey, finishing sometime next spring is MUCH better than finishing sometime next century! BUILD ON!!! :) On Fri, Nov 3, 2017 at 2:41 PM, Robert Reed wrote: Galin, I was sure hoping to take you up on that offer real soon but once again life, or in this case a wedding of my one and only daughter, got in the way. I sure wish she had decided to elope, would have cost me a lot less. That, along with now being in the design phase of my retirement home has pushed back the final completion of my KIS Cruiser until sometime next spring. I am so damn close but it seems like forever to go. Been waiting for an AS order with the last of my wiring and fuel system components for over a month now and still no word on shipment. I wonder if I could stretch some 12 ga into 16 ga and 18 ga? Probably not... I will finish this marathon if it is the last thing I do..... Bob Reed ------------------------------------------------------------------------- --- From: Galin Hernandez To: "kis-list@matronics.com" Sent: Thursday, November 2, 2017 9:49 PM Subject: Re: KIS-List: KIS4 Orientation The offer of some KIS4 "orientation flying" is open to any KIS builder/owner. :) On Thu, Nov 2, 2017 at 10:33 PM, Ed Hanson wrote: Thanks for helping out another builder with flight training Galin! ----- Original Message ----- From: Galin Hernandez To: kis-list@matronics.com Sent: Thursday, November 02, 2017 9:18 PM Subject: KIS-List: KIS4 Orientation KIS4 builder Fabricio and I had a great pair of flights today from St Augustine (KSGJ) to Ocala (KOCF) and back. Here is a photo taken after we got back to the KSGJ hangar. ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kis-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/KIS-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kis-list Browse Digests http://www.matronics.com/digest/kis-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.