Today's Message Index:
----------------------
1. 05:31 AM - Re: AW: Re: Can anyone help me with a wing template? (Robert Reed)
2. 09:48 AM - Re: AW: Re: Can anyone help me with a wing template? (Twellmann, Ralf)
3. 01:16 PM - Re: Re: Can anyone help me with a wing template? (M Ketteing)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Can anyone help me with a wing template? |
Thank you Ralf, its great that after all this time the KIS builders are still supporting
each other.
Thank you
Bob Reed
Sent from my iPhone
> On Nov 14, 2018, at 1:58 AM, Twellmann, Ralf <r.twellmann@steute.com> wrote:
>
> Hello,
>
> here is a DXF file of the airfoil with the appropriate cord length of 1167 mm.
(yes, we use the metric system ;-))
> I also added the 3 degree line you need to set the wing to the right angle.
> You should find somebody who has access to a big format printer to print it out
for you.
> Good luck with the construction of your plane and don`t hesitate to ask if you
have further questions.
>
> Best regards from Germany,
> Ralf Twellmann (KIS# 104)
>
>
> Tel.: +49 / (0)5731 745-158
> Fax: +49 / (0)5731 745-222
> mailto:r.twellmann@steute.com
> http://www.steute.com
>
>
> -----Ursprngliche Nachricht-----
> Von: owner-kis-list-server@matronics.com [mailto:owner-kis-list-server@matronics.com] Im Auftrag von threetracker
> Gesendet: Mittwoch, 14. November 2018 05:26
> An: kis-list@matronics.com
> Betreff: KIS-List: Re: Can anyone help me with a wing template?
>
>
> Tim has suggested that since the TR-1 wing is a straight wing someone could remove
a wingtip and trace the planform for me. I do have the molded wing tips
and I'm going to see how the traced shape looks for constructing a template.
>
> Thank you Tm. It might just work and it's at least worth a try. I can carefully
see how accurate a shape I can get off of two wing tips where they attach
to the end of the wings. That is still more accurate than a guess at the shape
based on ribs and skins.
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=484997#484997
>
>
>
>
>
>
>
>
>
> <NACA 63-215 with 3 Degrees.DXF>
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Can anyone help me with a wing template? |
My pleasure, Bob.
I forgot to mention that different from the drawing i sent, the airfoil on the
KIS has no crusp at the trailing edge (the shape is not curved inwards) but straight.
So simply replace the curve in the aileron/ flap area with a straight
line. This was done to simplify construction.
Regards, Ralf
> Am 14.11.2018 um 14:33 schrieb Robert Reed <robertr237@att.net>:
>
>
> Thank you Ralf, its great that after all this time the KIS builders are still
supporting each other.
>
> Thank you
>
> Bob Reed
> Sent from my iPhone
>
>> On Nov 14, 2018, at 1:58 AM, Twellmann, Ralf <r.twellmann@steute.com> wrote:
>>
>> Hello,
>>
>> here is a DXF file of the airfoil with the appropriate cord length of 1167 mm.
(yes, we use the metric system ;-))
>> I also added the 3 degree line you need to set the wing to the right angle.
>> You should find somebody who has access to a big format printer to print it
out for you.
>> Good luck with the construction of your plane and don`t hesitate to ask if you
have further questions.
>>
>> Best regards from Germany,
>> Ralf Twellmann (KIS# 104)
>>
>>
>> Tel.: +49 / (0)5731 745-158
>> Fax: +49 / (0)5731 745-222
>> mailto:r.twellmann@steute.com
>> http://www.steute.com
>>
>>
>> -----Ursprngliche Nachricht-----
>> Von: owner-kis-list-server@matronics.com [mailto:owner-kis-list-server@matronics.com] Im Auftrag von threetracker
>> Gesendet: Mittwoch, 14. November 2018 05:26
>> An: kis-list@matronics.com
>> Betreff: KIS-List: Re: Can anyone help me with a wing template?
>>
>>
>> Tim has suggested that since the TR-1 wing is a straight wing someone could
remove a wingtip and trace the planform for me. I do have the molded wing tips
and I'm going to see how the traced shape looks for constructing a template.
>>
>> Thank you Tm. It might just work and it's at least worth a try. I can carefully
see how accurate a shape I can get off of two wing tips where they attach
to the end of the wings. That is still more accurate than a guess at the shape
based on ribs and skins.
>>
>>
>>
>>
>> Read this topic online here:
>>
>> http://forums.matronics.com/viewtopic.php?p=484997#484997
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> <NACA 63-215 with 3 Degrees.DXF>
>
>
>
>
>
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Can anyone help me with a wing template? |
Both the TR1 and TR4 use the same airfoil, NACA 63(2)-215.
The TR1 has a cord of about 46" and the TR5 has a cord of about 56".
So you can use the template for the TR4 but scale it for the TR1.
--------------------------------------------
On Tue, 11/13/18, threetracker <jayfsluiter@msn.com> wrote:
Subject: KIS-List: Re: Can anyone help me with a wing template?
To: kis-list@matronics.com
Date: Tuesday, November 13, 2018, 9:07 PM
"threetracker" <jayfsluiter@msn.com>
Well. I feel much better about my
predicament after getting three replies already. It is true
that the TR-1 and the TR-4 are very different wings. I'm
told that the TR-1 wing was also used on the Pulsar 150.
Does anybody have any info on that application? I'm a
long way from being discouraged; somebody will come to my
rescue...lol
Thinking out loud; is it likely that a
particular wing design would be registered with somebody
other than the designer/manufacturer? I'm still hopeful that
someone will have a TR-1 template.
Thanks
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=484993#484993
Support Your Lists This Month --
(And Get Some AWESOME FREE Gifts!)
Fund Raiser. Click on
to find out more about
Incentive Gifts provided
www.mypilotstore.com
support!
-Matt Dralle, List Admin.
The KIS-List Email Forum -
Navigator to browse
List Un/Subscription,
7-Day Browse, Chat, FAQ,
- MATRONICS WEB FORUMS -
via the Web Forums!
- NEW MATRONICS LIST WIKI -
Email List Wiki!
- List Contribution Web Site -
support!
-Matt Dralle, List Admin.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|