Today's Message Index:
----------------------
1. 07:00 PM - Re: New (to me) LED Landing Lights (Galin Hernandez)
2. 08:18 PM - AeroLED SunLite 800's For Sale (Galin Hernandez)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: New (to me) LED Landing Lights |
I went flying today and did my 1st night landing with the new lights. It is
a BIG difference in illumination. I could see the runway markings from
about 500ft and illumination while taxiing was significantly better. I
attached two photos of the lights in use. One are the lights illuminating
the hangar across the way from mine while the other is as I taxied back
from landing.
On Sun, Jan 6, 2019 at 8:37 AM Galin Hernandez <galinhdz@gmail.com> wrote:
> I got the spot units. On approach you can see the runway significantly
> higher. They have enough "bleed over" to make taxiing with them a complete
> non issue. Besides, we approach to land at about 80Kts while we taxi at
> less than 15Kts.
>
> On Sat, Jan 5, 2019 at 10:24 PM Ed Hanson <hansoncp@netnitco.net> wrote:
>
>> Galin, did you get the spots or the combo units.
>>
>>
>>
>> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
>> Windows 10
>>
>>
>>
>> *From: *Galin Hernandez <galinhdz@gmail.com>
>> *Sent: *Thursday, January 3, 2019 11:18 PM
>> *To: *kis-list@matronics.com
>> *Subject: *KIS-List: New (to me) LED Landing Lights
>>
>>
>>
>> In 2011 I replaced my two Halogen landing lights with two Aerosun 800
>> (only the 1600's are currently produced). They put out a lot more light and
>> use significantly less current than Halogen. A few weeks ago a friend of
>> mine installed a pair of BajaDesign Squadron Pro lights and I saw how much
>> more light they put out for about the same current draw. Unfortunately,
>> they are just a bit too big to install in the leading edge of my airplane
>> wing, so I ordered a pair of their smaller S2 Pro Lights and installed
>> them. Even though the Aerosun 800's are brighter than my old Halogens, the
>> S2 Pro's are so much brighter. I have attached pictures so you can see the
>> difference between them.
>>
>>
>>
>> Neither of the two generate any RF interference in my fiberglass airplane
>> which was a big concern for me. The Aerosun 800 have a built in wig-wag
>> circuit where the S2 Pro does not. In order to get them to wig-wag I will
>> install a Crazed Pilot wig-wag unit which was highly recommended for this
>> application.
>>
>>
>>
>> So if you are looking to install some awesome LED landing lights in one
>> of our airplanes, I highly recommend either of these.
>>
>>
>>
>> https://aeroleds.com/products/aerosun/
>>
>> https://www.bajadesigns.com/products/S2-Pro.asp
>>
>>
>> https://www.crazedpilot.com/led-strobe-wig-wag-and-landing-light-controller/
>>
>>
>>
>>
>>
>
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | AeroLED SunLite 800's For Sale |
So now I have my old set of AeroLed's SunLite 800's available for sale. In
addition to being a great LED landing light they also have a built in
wig-wag synchronization capability. The best part is they are only 2.27"
High, 2.27" Wide and 1.31" deep so they easily fit inside the leading edge
of the KIS-4 wing. Together they put out the same amount of light the
currently produced AeroSun 1600 landing light does.
I am asking $250 for both and I will pay shipping anywhere in the USA so if
anybody wants them, e-mail me. If not I will put them up for sale at Vans
AF and E-Bay.
I have attached photos of the actual units, a photo of them inside the
KIS-4 wing and a link to ACS so you can see the current price ($325.00) for
the equivalent unit.
https://www.aircraftspruce.com/catalog/elpages/aerosun.php
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|