---------------------------------------------------------- KIS-List Digest Archive --- Total Messages Posted Sat 09/26/20: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:37 AM - Re: kiss TR1 (Wayne Ryalls) 2. 01:39 AM - Re: kiss TR1 (Wayne Ryalls) 3. 05:41 AM - Re: kiss TR1 (Graham Brighton) 4. 12:12 PM - Re: kiss TR1 (Wayne Ryalls) ________________________________ Message 1 _____________________________________ Time: 01:37:59 AM PST US From: Wayne Ryalls Subject: Re: KIS-List: kiss TR1 Hi Graham, thank you for your help,i purchased kr1 kiss which was about 80 percent complete from New.It needs front gear leg with spring etc and just a free other bits an pieces. Cheers Wayne. On Saturday, 26 September 2020, Graham Brighton wrote: > Hi Wayne, > Where are located ? ... TR1 Nose Gear Leg is not the > same as the TR4 unit .. TR1 Leg has No Shocker .. Just a Spring . Lyle > Hendricks supplies these units and is located USA . > Gullwing door Plexiglass replacements are available ... and sourced in USA > also .. supplier was identified in a Thread here not that long ago .. so a > little back tracking needed as off hand i dont recall . Someone maybe can > chime in with that info ? > So are you doing Repairs ? .. or needing missing parts for a TR1 project > or or ? > Cheers > Graham .. TR1 80 > > . > > > *From:* Wayne Ryalls > *Sent:* Sunday, September 27, 2020 10:07 AM > *To:* kis-list@matronics.com > *Subject:* KIS-List: kiss TR1 > > Hi, Would any one have a front gear legg with sping, shockstrut and > fittings to firewall for my TR1 kiss. I think same one is used on four seat > kiss as well > i would be keen on any other TR1 parts.including gullwing doors > and plexyglass door windows > .cheers wayne. > > > Virus-free. > www.avg.com <#m_5045009832245058055_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> > ________________________________ Message 2 _____________________________________ Time: 01:39:44 AM PST US From: Wayne Ryalls Subject: Re: KIS-List: kiss TR1 I am in New Zealand,cheers Wayne. On Saturday, 26 September 2020, Wayne Ryalls wrote: > Hi Graham, thank you for your help,i purchased kr1 kiss which was about 80 > percent complete from New.It needs front gear leg with spring etc and just > a free other bits an pieces. > Cheers Wayne. > > On Saturday, 26 September 2020, Graham Brighton > wrote: > >> Hi Wayne, >> Where are located ? ... TR1 Nose Gear Leg is not the >> same as the TR4 unit .. TR1 Leg has No Shocker .. Just a Spring . Lyle >> Hendricks supplies these units and is located USA . >> Gullwing door Plexiglass replacements are available ... and sourced in >> USA also .. supplier was identified in a Thread here not that long ago .. >> so a little back tracking needed as off hand i dont recall . Someone maybe >> can chime in with that info ? >> So are you doing Repairs ? .. or needing missing parts for a TR1 project >> or or ? >> Cheers >> Graham .. TR1 80 >> >> . >> >> >> *From:* Wayne Ryalls >> *Sent:* Sunday, September 27, 2020 10:07 AM >> *To:* kis-list@matronics.com >> *Subject:* KIS-List: kiss TR1 >> >> Hi, Would any one have a front gear legg with sping, shockstrut and >> fittings to firewall for my TR1 kiss. I think same one is used on four seat >> kiss as well >> i would be keen on any other TR1 parts.including gullwing doors >> and plexyglass door windows >> .cheers wayne. >> >> >> Virus-free. >> www.avg.com >> <#m_-8919343956307204847_m_5045009832245058055_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> >> > ________________________________ Message 3 _____________________________________ Time: 05:41:39 AM PST US From: "Graham Brighton" Subject: Re: KIS-List: kiss TR1 So ... do i understand that Construction of the Aircraft is about 80% done ? ... or is the Kit not started and the Contents is about 80% present ? .. Wondering is the Wing finished .. ? and maybe mounted to the Fuselage or ? How about Engine Choice ... have decided .. not decided ? Sorry if thats a lot of questions .. just that im in Victoria Oz ... and there's not many TR1's in our region !! .. ( maybe NZ has a couple on your Registry ? ) Graham. .. From: Wayne Ryalls Sent: Saturday, September 26, 2020 6:38 PM Subject: Re: KIS-List: kiss TR1 I am in New Zealand,cheers Wayne. On Saturday, 26 September 2020, Wayne Ryalls wrote: Hi Graham, thank you for your help,i purchased kr1 kiss which was about 80 percent complete from New.It needs front gear leg with spring etc and just a free other bits an pieces. Cheers Wayne. On Saturday, 26 September 2020, Graham Brighton wrote: Hi Wayne, Where are located ? ... TR1 Nose Gear Leg is not the same as the TR4 unit .. TR1 Leg has No Shocker .. Just a Spring . Lyle Hendricks supplies these units and is located USA . Gullwing door Plexiglass replacements are available ... and sourced in USA also .. supplier was identified in a Thread here not that long ago .. so a little back tracking needed as off hand i dont recall . Someone maybe can chime in with that info ? So are you doing Repairs ? .. or needing missing parts for a TR1 project or or ? Cheers Graham .. TR1 80 . From: Wayne Ryalls Sent: Sunday, September 27, 2020 10:07 AM To: kis-list@matronics.com Subject: KIS-List: kiss TR1 Hi, Would any one have a front gear legg with sping, shockstrut and fittings to firewall for my TR1 kiss. I think same one is used on four seat kiss as well i would be keen on any other TR1 parts.including gullwing doors and plexyglass door windows .cheers wayne. Virus-free. www.avg.com ________________________________ Message 4 _____________________________________ Time: 12:12:10 PM PST US From: Wayne Ryalls Subject: Re: KIS-List: kiss TR1 Hi Graham,yes it's construction is about 3/4 done.wings are constructed to, all needs filled and prepared for painting yet.I have 0235 lycoming engine for it. There is one other kr1 in nz,reg is, zk kiss.it has over one k hours of flying on it now. Cheers Wayne. On Sunday, 27 September 2020, Graham Brighton wrote: > So ... do i understand that Construction of the Aircraft is about 80% done > ? ... or is the Kit wing not started and the Contents is about 80% present > ? .. Wondering is the Wing finished .. ? and maybe mounted to the > Fuselage or ? > How about Engine Choice ... have decided .. not decided ? > Sorry if thats a lot of questions .. just that im in Victoria Oz ... and > there's not many TR1's in our region !! .. ( maybe NZ has a couple on your > Registry ? ) > Graham. > > . > > *From:* Wayne Ryalls > *Sent:* Saturday, September 26, 2020 6:38 PM > *To:* kis-list@matronics.com > *Subject:* Re: KIS-List: kiss TR1 > > I am in New Zealand,cheers Wayne. > > On Saturday, 26 September 2020, Wayne Ryalls wrote: > >> Hi Graham, thank you for your help,i purchased kr1 kiss which was about >> 80 percent complete from New.It needs front gear leg with spring etc and >> just a free other bits an pieces. >> Cheers Wayne. >> >> On Saturday, 26 September 2020, Graham Brighton >> wrote: >> >>> Hi Wayne, >>> Where are located ? ... TR1 Nose Gear Leg is not the >>> same as the TR4 unit .. TR1 Leg has No Shocker .. Just a Spring . Lyle >>> Hendricks supplies these units and is located USA . >>> Gullwing door Plexiglass replacements are available ... and sourced in >>> USA also .. supplier was identified in a Thread here not that long ago .. >>> so a little back tracking needed as off hand i dont recall . Someone maybe >>> can chime in with that info ? >>> So are you doing Repairs ? .. or needing missing parts for a TR1 project >>> or or ? >>> Cheers >>> Graham .. TR1 80 >>> >>> . >>> >>> >>> *From:* Wayne Ryalls >>> *Sent:* Sunday, September 27, 2020 10:07 AM >>> *To:* kis-list@matronics.com >>> *Subject:* KIS-List: kiss TR1 >>> >>> Hi, Would any one have a front gear legg with sping, shockstrut and >>> fittings to firewall for my TR1 kiss. I think same one is used on four seat >>> kiss as well >>> i would be keen on any other TR1 parts.including gullwing doors >>> and plexyglass door windows >>> .cheers wayne. >>> >>> >>> Virus-free. >>> www.avg.com >>> <#m_-6832599336062864760_m_-8919343956307204847_m_5045009832245058055_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> >>> >> ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kis-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/KIS-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kis-list Browse Digests http://www.matronics.com/digest/kis-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.